Hostname: page-component-586b7cd67f-gb8f7 Total loading time: 0 Render date: 2024-11-28T11:07:42.920Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Properties of Poly (lactic acid) Composites Reinforced with CaCO3 Eggshell Based Fillers

Published online by Cambridge University Press:  03 July 2017

Nicholas G. Betancourt  and
Duncan E. Cree
Nicholas G. Betancourt
Affiliation:
Department of Mechanical Engineering, University of Saskatoon, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada.
Duncan E. Cree*
Affiliation:
Department of Mechanical Engineering, University of Saskatoon, 57 Campus Drive, Saskatoon, SK S7N 5A9, Canada.
*
*(Email: [email protected])

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

Poly (lactic acid) (PLA) bioplastics are recyclable and biodegradable thermoplastics. They are derived from environmentally friendly sources such as potatoes, cornstarch and sugarcane. However, PLA is inherently brittle with low impact strength. The goal of this study is to improve mechanical properties of PLA by the addition of calcium carbonate (CaCO3) fillers. PLA composites were prepared by injection molding conventional limestone (LS) and white chicken eggshell (WES) powders with particle sizes of 63 μm and 32 μm in amounts of 5 wt. %, 10 wt. % and 20 wt. %. Mechanical properties such as, tensile strength, tensile modulus, and Charpy impact strengths were investigated. These three properties were evaluated and the results statistically analyzed using ANOVA F-test. For both particle sizes, the tensile strength decreased as the filler content increased, but was highest for a filler loading of 5 wt. %. In general, the 32 μm powder fillers had better tensile strengths than 63 μm sized fillers. The tensile modulus increased with filler content and was highest at 20 wt. % for both particle sizes. The LS/PLA composites had better toughness than the WES/PLA composites. The particle filler morphology and fractured surfaces were observed by scanning electron microscopy (SEM) and determined to have well dispersed particles with smooth fractured surfaces. Water absorption behavior of PLA/CaCO3 composites were studied by immersion in distilled water at room temperature for 56 days. Virgin PLA absorbed the least amount of water while the water absorption of CaCO3 composites were a function of powder type and content.

Keywords

polymerwaste managementstress/strain relationship
Type
Articles
Information
MRS Advances , Volume 2 , Issue 47: Soft Materials and Biomaterials , 2017 , pp. 2545 - 2550
Copyright
Copyright © Materials Research Society 2017 

References

REFERENCES

Miller, S. A., ACS Macro Lett. 2, 550 (2013).Google Scholar
Castro-Aguirre, E., Iñiguez-Franco, F., Samsudin, H., Fang, X., and Auras, R., Adv. Drug Deliv. Rev. 107, 333 (2016).Google Scholar
János, M., and Pukánszky, B., J. Ind. Eng. Chem. 14, 535 (2008).Google Scholar
Cree, D., and Rutter, A.. ACS Sustain. Chem. Eng. 3, 941 (2015).Google Scholar
Essabir, H., Bensalah, M. O., Rodrigue, D., Bouhfid, R., and Qaiss, A.. Constr. Build. Mater. 134, 549 (2017).Google Scholar
Ashok, B., Naresh, S., Reddy, K. O., Madhukar, K., Cai, J., Zhang, L., and Rajulu, A. V.. Int. J. Polym. Anal. 19, 245 (2014).Google Scholar
Pliya, P., and Cree, D.. Constr. Build. Mater. 95, 1 (2015).Google Scholar
Tullett, S. G., and Deeming, D. C.. Comp. Biochem.Phys. A 3, 529 (1982).Google Scholar
DesRosiers, L. E., Abatzoglou, N., Cartilier, L., and Simard, J. S.. Pharmaceut. Res. 23, 997 (2006).Google Scholar