Hostname: page-component-cd9895bd7-7cvxr Total loading time: 0 Render date: 2024-12-25T18:37:39.863Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis and characterization of 50-50 wt. lanthanum aluminate-lanthanum zirconate composite dried by spray-drying

Published online by Cambridge University Press:  09 June 2020

W. Hernández Muñoz ,
J. Zárate Medina ,
J. Serrato Rodríguez  and
J. Muñoz Saldaña
W. Hernández Muñoz
Affiliation:
Universidad ECCI, Carrera. 19 No. 49-20, Bogotá, Colombia, Código Postal 111311
J. Zárate Medina
Affiliation:
Instituto de Investigación en Metalurgia y Materiales, Universidad Michoacana de San Nicolás de Hidalgo, Morelia, México
J. Serrato Rodríguez
Affiliation:
Instituto de Investigación en Metalurgia y Materiales, Universidad Michoacana de San Nicolás de Hidalgo, Morelia, México
J. Muñoz Saldaña
Affiliation:
Cinvestav Unidad-Queretaro, Queretaro, Libramiento Norponiente No. 2000, Fracc Real de Juriquilla Querétaro, CP.76230QuerétaroMéxico
Get access

Abstract

Lanthanum aluminate-lanthanum zirconate composite was synthesized by using coprecipitation and powders were dried by spray-drying. Pseudoboehmite was used as a precursor of lanthanum aluminate during the precipitation process. Highly crystalline phases were obtained. Lanthanum zirconate exhibits a pyrochlore structure at lower synthesis temperature (>1500°C). Due drying technique lanthanum aluminate particles appear surrounded by lanthanum zirconate. No other remaining phases were observed and the phase distribution in the composite was homogeneous.

Type
Articles
Information
MRS Advances , Volume 5 , Issue 42: Nanoscale and Quantum Materials , 2020 , pp. 2173 - 2179
Check for updates
Copyright
Copyright © Materials Research Society 2020

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Tong, Y., Zhu, J., Lu, L., Wang, X., and Yang, X., “Preparation and characterization of Ln2Zr2O7(Ln = La and Nd) nanocrystals and their photocatalytic properties,” J. Alloys Compd., vol. 465, no. 1–2, pp. 280–284, 2008, doi: 10.1016/j.jallcom.2007.10.097.CrossRefGoogle Scholar
Wang, S., Li, W., Wang, S., and Chen, Z., “Synthesis of nanostructured La2Zr2O7 by a non-alkoxide sol–gel method: From gel to crystalline powders,” J. Eur. Ceram. Soc., vol. 35, no. 1, pp. 105–112, 2015, doi: 10.1016/j.jeurceramsoc.2014.08.032.CrossRefGoogle Scholar
Han, J., Wang, Y., Liu, R., and Cao, Y., “Lanthanum zirconate ceramic toughened by ferroelastic domain switching,” Ceram. Int., vol. 44, no. May, pp. 15954–15958, 2018, doi: 10.1016/j.ceramint.2018.06.016.CrossRefGoogle Scholar
Aruna, S. T., Sanjeeviraja, C., Balaji, N., and Manikandanath, N. T., “Properties of plasma sprayed La2Zr2O7coating fabricated from powder synthesized by a single-step solution combustion method,” Surf. Coatings Technol., vol. 219, pp. 131–138, 2013, doi: 10.1016/j.surfcoat.2013.01.016.CrossRefGoogle Scholar
Tong, Y., Wang, Y., Yu, Z., Wang, X., Yang, X., and Lu, L., “Preparation and characterization of pyrochlore La2Zr2O7 nanocrystals by stearic acid method,” Mater. Lett., vol. 62, no. 6–7, pp. 889–891, 2008, doi: 10.1016/j.matlet.2007.07.005.CrossRefGoogle Scholar
Koteswara Rao, K. et al. , “Preparation and characterization of bulk and nano particles of La 2 Zr 2 O 7 and Nd 2 Zr 2 O 7 by sol – gel method,” Mater. Lett., vol. 54, no. May, pp. 205–210, 2002, doi: 10.1016/S0167-577X(01)00564-X.CrossRefGoogle Scholar
Wang, L., Wang, Y., Sun, X. G., He, J. Q., Pan, Z. Y., and Yu, L. L., “Preparation and characterization of nanostructured La2Zr2O7 feedstock used for plasma spraying,” Powder Technol., vol. 212, no. 1, pp. 267–277, 2011, doi: 10.1016/j.powtec.2011.06.001.CrossRefGoogle Scholar
Li, J. Y. et al. , “Lanthanum zirconate ceramic toughened by BaTiO3 secondary phase,” J. Alloys Compd., vol. 452, no. 2, pp. 406–409, 2008, doi: 10.1016/j.jallcom.2006.11.025.CrossRefGoogle Scholar
Henniche, A., Ouyang, J. H., Ma, Y. H., Wang, Z. G., Wang, Y. J., and Liu, Z. G., “Microstructure and mechanical properties of ceramics obtained from chemically co-precipitated Al2O3-GdAlO3nano-powders with eutectic composition,” Ceram. Int., vol. 43, no. 9, pp. 6996–7001, 2017, doi: 10.1016/j.ceramint.2017.02.125.CrossRefGoogle Scholar
Behera, S. K., Sahu, P. K., Pratihar, S. K., and Bhattacharyya, S., “Phase evolution in gel-precipitated LaAlO3 ceramics,” J. Phys. Chem. Solids, vol. 69, no. 8, pp. 2041–2046, 2008, doi: 10.1016/j.jpcs.2008.02.019.CrossRefGoogle Scholar
Zhang, Q. S. F. Q. and Saito, F., “Mechanochemical Synthesis of Lanthanum Aluminate by Grinding Lanthanum Oxide with Transition Alumina,” J. Am. Ceram. Soc., vol. 41, no. 189189, pp. 439–441, 2009, [Online]. Available: http://hdl.handle.net/2440/57906.Google Scholar
Tian, Z. Q., Yu, H. T., and Wang, Z. L., “Combustion synthesis and characterization of nanocrystalline LaAlO3 powders,” Mater. Chem. Phys., vol. 106, no. 1, pp. 126–129, 2007, doi: 10.1016/j.matchemphys.2007.05.027.CrossRefGoogle Scholar
Kim, C. H., Jang, J. W., Cho, S. Y., Kim, I. T., and Hong, K. S., “Ferroelastic twins in LaAlO3 polycrystals,” Phys. B Condens. Matter, vol. 262, no. 3–4, pp. 438–443, 1999, doi: 10.1016/S0921-4526(98)00848-5.CrossRefGoogle Scholar
Islam, M. N., Araki, W., and Arai, Y., “Mechanical behavior of ferroelastic LaAlO 3,” J. Am. Ceram. Soc., vol. 37, pp. 1665–1671, 2017.CrossRefGoogle Scholar
Wilson, H. M., Juan, S. R., Juan, M. S., and Juan, Z. M., “Synthesis of lanthanum aluminate by reverse chemical precipitation using pseudoboehmite as alumina precursor,” Appl. Radiat. Isot., vol. 117, pp. 96–99, 2016, doi: 10.1016/j.apradiso.2016.01.026.CrossRefGoogle ScholarPubMed
Prusty, D., Pathak, A., Chintha, A., Mukherjee, B., and Chowdhury, A., “Structural investigations on the compositional anomalies in lanthanum zirconate system synthesized by coprecipitation method,” J. Am. Ceram. Soc., vol. 97, no. 3, pp. 718–724, 2014, doi: 10.1111/jace.12741.CrossRefGoogle Scholar
Medina, J. Z., Martínez, G. T., Esparza, B. E., Hernández, A. M., and Saldaña, J. M., “Processing and microstructural characterization of sintered lanthanum aluminate obtained by two different routes,” Ceram. Trans., vol. 249, pp. 105–113, 2014, doi: 10.1002/9781118995433.ch11.CrossRefGoogle Scholar