The available data on compositional zoning in grossular-andradite (grandite) garnets occurring at different scales, mainly due to the variations of their Fe3+/Al ratios, and the hypotheses on the origin of this zoning are reviewed. Four zoned crystals of grandites showing different optical properties have been studied by means of X-ray diffraction. Optical and structural studies suggest three superimposed scales of Fe3+/Al zonality along [110]. The drastic change of the structural characteristics from sample to sample correlates with the change of their optical patterns. The superfine oscillatory zoning has been described in terms of irregular interstratified structures with a high degree of segregation. The self-affinity of zoning at different scales testify to the possible origin of the zonality due to the non-linear dynamics at the growth front. The wide variation of the layer compositions revealed by the modelling of the X-ray diffraction profiles seems to contradict the hypothesis of unmixing in grandite garnets.

Mereheadite, ideally Pb2O(OH)Cl, is a new mineral related to litharge and which is structurally similar to synthetic bismuth-oxyhalides. With other lead- and lead-copper oxychlorides, it occupies lenses and cavities in veins of manganese and iron oxide minerals which cut through a sequence of dolomitic limestones at Merehead quarry, Cranmore, Somerset (51°12′N, 2°26′W) Mereheadite is pale yellow to reddish-orange, transparent to translucent and has a white streak and a vitreous or resinous lustre. It is not fluorescent. Individual grains, up to a few mm across, cluster together in compact masses of 10–30 mm in size, but discrete crystals have not been observed. Specular reflectance data on randomly orientated grains from 400 to 700 nm are provided, and refractive indices calculated from these at 590 nm range from 2.19 to 2.28. H = 3.5, VHN100 = 171, D(meas) = 7.12(10) g/cm3, Dcalc = 7.31 g/cm3. The mineral is brittle with an uneven, conchoidal to hackly fracture and has a perfect (001) cleavage which is parallel to the sheets of PbO and Cl. It is intimately associated with mendipite, blixite, cerussite, hydrocerussite and calcite in lenses and pods in the veins. Other minerals which occupy cavities in these veins include chloroxiphite, paralaurionite, parkinsonite and the borosilicate datolite. Mereheadite is monoclinic, space group C2/c, and its cell parameters, refined from powder X-ray diffraction are: a = 5.680(2), b = 5.565(3), c = 13.143(9) Å, β=90.64(4)°, V = 415.4 (8) Å3, Z = 4. The ten strongest reflections in the X-ray powder diffraction pattern are [d in Å, (I, hkl)]: 2.930(10,113), 3.785(5,111, –111), 2.825(4,200), 6.581(4,002), 2.182(4,115), 2.780(4,020), 3.267(4,004), 1.980(3,–220), 1.695(3,224,132,117), 1.716(3,026). Its empirical formula is Pb8O4.19(BO3)0.51 (CO3)0.62(OH)0.76Cl4.09. Although it is very similar chemically to blixite, it has notably different cell parameters. There is some uncertainty about the essential nature of boron and carbon in natural mereheadite. This stems from the impossibility of ensuring the purity of samples for wet-chemical analysis, and from the predominance of lead in the structure of the mineral which has meant that the location of boron and carbon within the mereheadite structure is unresolved, 11B MAS NMR does show, however, that boron is present as BO3 groups. The structure consists of alternating PbO sheets and layers of chlorine atoms. Each lead atom is coordinated to four chlorines and four O/OH in a square antiprism configuration. As such, it is structurally-related to nadorite, thorikosite and schwartzembergite. Comparisons with structurally analogous phases such as bismuth oxychlorides and bismutite (Bi2O2CO3) suggest that the BO3 and CO3 groups are likely to replace chlorine in the layer between PbO sheets. The composition of natural mereheadite is defined by three end-members: the mereheadite end-member Pb2O(OH)Cl, and two fictive end-members Pb2(OH)2CO3 and Pb4O(OH)3BO3.

A vitric fiamme containing BaO-bearing sanidine (BaO = 11 wt.%) was sampled (via di Fioranello, Rome) in the pyroclastic products of the Lower Flow Unit (LFU) belonging to the Villa Senni Eruption Unit in the Colli Albani Volcanic District (Roman Comagmatic Province, Central Italy). The fiamme of the LFU is essentially made up of glass, in which scarce phenocrysts of BaO-bearing sanidine, leucite and Al2O3-bearing Ca-clinopyroxene occur. In this paper the various parameters controlling barium partitioning between alkali feldspar and LFU liquid, are discussed.

This report embodies recommendations on zeolite nomenclature approved by the International Mineralogical Association Commission on New Minerals and Mineral Names. In a working definition of a zeolite mineral used for this review, interrupted tetrahedral framework structures are accepted where other zeolitic properties prevail, and complete substitution by elements other than Si and Al is allowed. Separate species are recognized in topologically distinctive compositional series in which different extra-framework cations are the most abundant in atomic proportions. To name these, the appropriate chemical symbol is attached by a hyphen to the series name as a suffix except for the names harmotome, pollucite and wairakite in the phillipsite and analcime series. Differences in spacegroup symmetry and in order—disorder relationships in zeolites having the same topologically distinctive framework do not in general provide adequate grounds for recognition of separate species. Zeolite species are not to be distinguished solely on Si : Al ratio except for heulandite (Si : Al < 4.0) and clinoptilolite (Si : Al ⩾ 4.0). Dehydration, partial hydration, and over-hydration are not sufficient grounds for the recognition of separate species of zeolites. Use of the term ‘ideal formula’ should be avoided in referring to a simplified or averaged formula of a zeolite.

Newly recognized species in compositional series are as follows: brewsterite-Sr, -Ba; chabazite-Ca, - Na, -K; clinoptilolite-K, -Na, -Ca; dachiardite-Ca, -Na; erionite-Na, -K, -Ca; faujasite-Na, -Ca, -Mg; ferrierite-Mg, -K, -Na; gmelinite-Na, -Ca, -K; heulandite-Ca, -Na, -K, -Sr; levyne-Ca, -Na; paulingite-K, -Ca; phillipsite-Na, -Ca, -K; stilbite-Ca, -Na.

Key references, type locality, origin of name, chemical data, IZA structure-type symbols, space-group symmetry, unit-cell dimensions, and comments on structure are listed for 13 compositional series, 82 accepted zeolite mineral species, and three of doubtful status. Herschelite, leonhardite, svetlozarite, and wellsite are discredited as mineral species names. Obsolete and discredited names are listed.

The Late Pleistocene kamafugite–carbonatite association at San Venanzo-Pian di Celle forms part of the Umbria-Latium Ultra-alkaline District (ULUD) of central Italy and, together with Toro-Ankole, SW Uganda and Mata de Corda, Brazil, represents one of three similar occurrences so far reported worldwide.

Excellent field exposure and stratigraphic control prompted a study of the kamafugite–carbonatite suite and related phase interactions to understand the nature of the distinct mineral assemblages of the pyroclasts, compared to that of the lavas, the former containing essential potassium feldspar and aluminous diopside crystals, absent in the latter.

The pyroclastic rocks represent a small amount of magma characterized by ubiquitous mantle xenocrysts and emplaced by early high-velocity eruptions. All the investigated specimens show a high Mg/(Mg+Fe2+) ratio (0.84–0.93) and high compatible elements (Ni+Cr>1000 ppm). Lavas (venanzite, i.e. leucite melilitite) and a sill (uncompahgrite, i.e. melilitolite) represent final events in the volcanic sequence. They yielded a (Na+K)/Al ratio of c. 1.1 and are larnite-bearing in the CIPW norm. Glass from the lapilli is peralkaline, i.e. (Na+K)/Al>2, and close to the lava in composition. Glass from melilitolite yielded CIPW Or and Hy and is strongly peralkaline, i.e. (Na+K)/Al = 5–6. The lapilli typically exhibit concentrically zoned structures which compound subliquidus venanzite phases, e.g. melilite, leucite, and kalsilite, with mantle xenolithic/xenocrystic debris and carbonatite phases. These lapilli represent a distinct variant of the venanzite liquid, mechanically fractionated and quenched by the diatremic process.

Mantle-normalized HFSE for both lava and lapilli show typical extrusive-carbonatite patterns. Carbonatitic beds intercalated with the pyroclastic suite are distinct and typically consist of carbonates high in Sr, Ba and REE. Primary carbonate yielded C isotope compositions ranging from –5.0 to –6.0 δ13C‰, falling within the range of mantle compositions. Distinct differentiation trends of the venanzite magma and its derivatives were recognized, hinging on the coexistence of the silicate and carbonatite fractions. Potential sanidine crystallization trends are suggested, distinct from the venanzite→melilitolite trend, reported for Oldoinyo Lengai assemblages.

Unusual aspects of the San Venanzo rock association, relative to similar rock types elsewhere, include the combination of a rare mantle source composition with a lithosphere about 80 km thick. A genetic model for the origin of the San Venanzo kamafugite–carbonatite association and related carbonate-silicate interactions is proposed and discussed. This may be relevant to the petrogenesis of similar rocks elsewhere, particularly in the light of the detailed data on the pyroclasts.

Okayamalite, Ca2B2SiO7, tetragonal, P21m, a = 7.116, c = 4.815 Å, Z = 2, is a new member of melilite group, the boron analogue of gehlenite. Electron microprobe analysis gave CaO 46.28, B2O3 28.50, SiO2 24.24, Al2O3 0.36, total 99.38 wt.%, corresponding to Ca2.01B2.00Si0.98Al0.02O7, a natural counterpart of Ca2B2SiO7 known only synthetically. The strongest lines in the X-ray powder diffraction pattern are 3.479 (40)(111), 2.862 (55)(201), 2.654 (100)(211), 2.129 (20)(301), 1.920 (35)(212), 1.644 (29)(312), very close to those of the synthetic material (a = 7.115, and c = 4.812 ). It is creamy white in colour with an earthy appearance due to the fine grain size. Streak white, cleavage not observed. Hardness ∼5½. Density calculated on the ideal formula is 3.30 g/cm3. It is optically uniaxial negative with ω = 1.700, and ɛ = 1.696. It occurs as patches of a few millimetres across in grey homogeneous-looking aggregate of wollastonite, vesuvianite, calcite and johnbaumite from Fuka mine, Bicchu-cho, Okayama Prefecture, Japan. The patches consist of very fine grains of the mineral up to 30 μm. Okayamalite is considered to be a product after the reaction formula: CaCO3 + CaSiO3 + B2O3 = Ca2B2SiO7 + CO2, arising from boron metasomatism of a wollastonite-calcite aggregate. The name is for the prefecture.

The Långban, Nordmark and Jakobsberg Mn-Fe deposits contain the only known occurrences of filipstadite and manganostibite (ideal formulae (Mn, Mg)2(Sb0.55+Fe0.53+)O4 and Mn72+SbAsO12, respectively). Filipstadite from Nordmark is newly recognized, and occurs in assemblages with svabite-johnbaumite, calcite, tephroite-forsterite, phlogopite-kinoshitalite, tilasite, ±jacobsite, ±plumbia roméite, ±adelite, ±hedyphane. Manganostibite from Långban and Jakobsberg is reported for the first time, and the mineral is generally associated with katoptrite, tephroite, humite-group minerals, calcite, svabite, allactite, manganosite, hausmannite, jacobsite, spinel s.s., etc. Whereas filipstadite is clearly secondary relative to the major part of the matrix components, manganostibite is believed to have formed coevally with the principal ore and skarn minerals at these deposits.

The previously known compositional ranges are extended. Based on electron-microprobe analyses, Nordmark filipstadite contains 4.1–7.3 MgO, 0.0–0.5 Al2O3, 30.5–45.3 MnO, 17.0–40.1 Fe2O3, 0.2–0.9 ZnO, 19.9–29.9 Sb2O5 (all in wt.%), corresponding to 58–100 mol.% of a pure filipstadite component. Associated jacobsites show Sb2O5 contents of up to c. 5 wt.%. Manganostibites (all three deposits considered) contain 1.0–2.9 MgO, 2.8–3.8 SiO2, 57.4–60.3 MnO, 0.2–3.5 Mn2O3, 0.3–2.0 Fe2O3, 0.0–2.4 ZnO, 21.5–23.0 Sb2O5, 7.7–10.0 As2O5 (all in wt.%). Si and trivalent cations are incorporated via a (Mn3+,Fe3+) + Si4+=Mn2+ + As5+ exchange mechanism, which improves the local charge balance at tetrahedral structural sites dominated by As.

Zussmanite KFe13[AlSi17O42](OH)14, a modulated 2:1 layer silicate, has so far been found only in iron-rich metasediments from Laytonville, California (Agrell et al.), 1965). A new occurrence is reported here from Punta Nihue north of Valdivia, Chile, in banded stilpnomelane-schists. These are intercalated in the ‘Western Series’, a complex of low-grade metamorphic rocks with local high-pressure, low-temperature overprint (e.g. blueschists).

The rock contains conspicuous porphyroblasts of zussmanite of mm size and is composed of chemically distinct bands with the subsequent assemblages: (1) zussmanite-stilpnomelane-quartz, (2) siderite-quartz±stilpnomelane (3) apatite-stilpnomelane-quartz±siderite. The chemical composition of zussmanite, (K0.80Na0.05Ba0.01)(Fe11.292+Mg1.11Mn0.25Fe0.143+Cr0.01Al0.19Ti0.01)[Al1.23Si16.77O42](OH)14, its optical properties and X-ray data correlate well with the Californian occurrence. Additionally, we present new IR data. In type (2) bands of fine-grained crystals of a K,Al poor mineral formed from siderite and quartz. Its chemical composition is close to that of zussmanite. A similar phase was also reported from Laytonville, California (Muir Wood, 1980).

The rarity of rock-forming zussmanite can be explained by its occurrence in strongly Fe-rich and reduced rocks, as well as, by a possibly narrow P-T stability field.

The micro-inclusions located in the genetic centre of Yakutian diamond monocrystals have been studied using optical (anomalous birefringence, photoluminescence, cathodoluminescence) and microanalytical (electron-microprobe, proton-microprobe, scanning electron microscope) methods. Most diamonds nucleated heterogeneously on mineral seeds, that lowered the energy barrier to nucleation. Nucleation of peridotitic diamonds occurred on a matrix of graphite+iron+wüstite, in an environment dominated by forsteritic olivine and Fe-Ni sulfide. Nucleation of eclogitic diamonds occurred on a matrix of sulfide ± iron in an environment dominated by Fe-sulfide and omphacite (±-K-Na-Al-Si-melt). The mineral assemblages recorded in the central inclusions of Yakutian diamonds indicate that they grew in a reduced environment, with oxygen fugacity controlled by the iron-wüstite equilibrium. Nucleation of diamond occurred in the presence of a fluid, possibly a volatile-rich silicate melt, highly enriched in LIL (K, Ba, Rb, Sr) and HFSE (Nb, Ti, Zr) elements. This fluid also carried immiscible Fe-Ni-sulfide melts, and possibly a carbonatitic component; the introduction of this fluid into a reduced refractory environment may have been accompanied by a thermal pulse, and may have created the conditions necessary for the nucleation and growth of diamond.

The rare iron-tin hydroxide minerals natanite and jeanbandyite occur as small pseudo-octahedral crystals in high-temperature Sn-Cu-As veins at Penberthy Croft Mine and Hingston Downs Quarry, Cornwall. The lattice parameters for jeanbandyite and natanite are reported and compared to previously calculated values. The chemical composition of jeanbandyite is discussed and a significant proportion of divalent Fe and Mn is shown to be present.