Highly nonlinear ellipsoid bubble regime of the laser wake-field acceleration with high-intensity laser pulse is considered with analytical and numerical calculations. The important property of this regime is the production of the mono-energetic high-quality electron beam. We introduce a new twofold ellipsoid structure of the bubble (egg shape) by referring to some published two-dimensional (2D) and 3D simulations. In this paper, a new analytical formalism is introduced, in which dimensions of the front part of the ellipsoid bubble are related to the laser pulse and plasma parameters. These relationships are in agreement with 2D particle-in-cell code results in recent work (Benedetti et al., 2013).

Electron acceleration by a circularly polarized Hermite–Gaussian (HG) laser beam in the plasma has been investigated theoretically for the different transverse electromagnetic (TEM) mode indices (m, n) as (0, 1), (0, 2), (0, 3), and (0, 4). HG laser beam possesses higher trapping force compared with a standard Gaussian beam owing to its propagation characteristics during laser–electron interaction. A single-particle simulation indicates a resonant enhancement in the electron acceleration with HG laser beam. We present the intensity distribution for different TEM modes. We also analyze the dependence of beam width parameter on electron acceleration distance, which effectively influences the electron dynamics. Electron acceleration up to longer distance is observed with the lower modes. However, the higher electron energy gain is observed with higher modes at shorter distance of propagation.

This paper presents theoretical investigation of effect of relativistic self-focusing of cosh-Gaussian (ChG) laser beam on second-harmonic generation in an underdense plasma. Steep transverse density gradients are produced in the plasma by the electron plasma wave excited by relativistic self-focusing of ChG laser beam. The generated plasma wave interacts with the pump beam to produce its second harmonics. Following Jeffrey Wentzel Kramers Brillouin (J.W.K.B) approximation and moment theory the differential equation governing the evolution of spot size of laser beam with distance of propagation has been derived. The differential equation so obtained has been solved numerically by the Runge–Kutta method to investigate the effect of decentered parameter, intensity of laser beam as well as density of plasma on self-focusing of the ChG laser beam, and generation of its second harmonics. It has been observed that the peak intensity of the laser beam shifts in the transverse direction by changing the decentered parameter and a noticeable change is observed on focusing of the laser beam as well as on conversion efficiency of second harmonics.

This paper presents analytical calculations for terahertz (THz) radiation by beating of two cosh-Gaussian laser beams in a density rippled collisional magnetized plasma. Lasers beams exert a ponderomotive force on the electrons of plasma in beating frequency which generates THz waves. The magnetic field was considered parallel to the direction of lasers which leads to propagate right-hand circularly polarized or left-hand circularly polarized waves in the plasma depending on the phase matching conditions. Effects of collision frequency, decentered parameter of lasers and the magnetic field strength are analyzed for THz radiation generation. By the optimization of laser and plasma parameters, the efficiency of order 27% can be achieved.

We study the problem of the amplification of an ultra-short seed pulse via stimulated Raman backscattering (SRB) from a long pump pulse (assumed to have an envelope with a constant amplitude), in an underdense plasma. The SRB interaction couples the pump light wave to a daughter light seed wave propagating in the opposite direction, scattered off an electron plasma wave. In recent numerical simulations, it has been observed that besides stimulated Raman backward scattering (SRBS) and stimulated Raman forward scattering, other high-frequency kinetic instabilities can occur when modified distribution functions exist during the evolution of the system. In particular, we showed the prominent role played by kinetic electrostatic electron nonlinear (KEEN) waves (Afeyan et al., 2004). We continue this work by applying a relativistic Vlasov–Maxwell code to study stimulated KEEN wave scattering (SKEENS) and its role in the SRBS short pulse amplification processes. An analysis of the full spectrum of waves participating in the amplification processes is presented. The absence of spurious noise in grid-based Vlasov codes allows us to follow the evolution of the system with a kinetic (collisionless) description. This affords us a glimpse at the intricate phase-space structures such as trapped particle orbits, which coexist and interact nonlinearly in the electron distribution function.

The superconducting synchrotron SIS100 of the FAIR accelerator project will provide heavy ion beams of highest intensities. SIS100 is the first synchrotron with a special design, optimized for the control of ionization beam loss. Ionization beam loss is the most pronounced loss mechanism at operation with high-intensity, intermediate charge state heavy ions. The new synchrotron layout comprises an ion catcher system, which in combination with a charge separator lattice shall suppress dynamic vacuum effects.

A prototype cryogenic ion catcher, including a dedicated cryostat has been designed, manufactured, and tested under realistic conditions with beams from the heavy-ion synchrotron SIS18 at GSI. The gas desorption induced by the impact of heavy ions on this cryocatcher has been measured. For the very first time, a rise of desorption yield with increasing beam energy has been observed. However, measurements at room temperature have confirmed the known decrease of the pressure rise in the investigated energy regime. A transition temperature of 18 K, underneath hydrogen is adsorbed, could be verified several times. The results are significant and used to predict the ionization beam loss at operation of SIS100 at full-beam intensity.

Runaway electrons preionized diffuse discharge (REP DD) could generate volume non-thermal plasmas at atmospheric pressure, thus is widely used for surface modification. In this paper, two pulsed generators are used to produce REP DD for modifying copper (Cu) foil in atmospheric air. One generator produces repetitive pulses with a peak voltage of 40 kV and a rise time of 150 ns. The other generator produces single pulse with a peak voltage of 280 kV and a rise time of 0.5 ns. After the treatment, the modification results for including the macro topography, chemical composition and microhardness in different depths of the Cu surface are analyzed. In order to estimate the modification results in different areas of the Cu foil, several points from the center to the edge of the Cu sample are selected. It could be observed that the maximal modification effect usually appears in the area where the density of the diffuse discharge plasma is highest. The experimental results show REP DD treatment could significantly decrease the water contact angle and increase surface energy of the Cu foil. Meanwhile, it could decrease the carbon concentration and increase oxygen concentration in the near-surface layer of the Cu sample, and enhance the microhardness in different depths of the Cu foil.

Nanostructuring can be either spontaneously appearing (such as laser-induced periodic surface structures, and diffraction patterns – for example, in windows of grid proximity-standing at the ablated target-surface) or artificially created (like – as we hoped – interference patterns) that can be in some extend controlled. Due to that a new interferometer (belonging to wave-front division category) with two aspheric mirrors has been developed. Each of these mirrors reflects approximately one half of incoming laser beam and focuses it into a point image. Both focused beams have to intersect each other, and in the intersection region an interference pattern was expected. However, the first tests showed that some other spontaneously appearing interference pattern with substantially larger fringe-pitch is generated. The origin of this idle interference pattern is discussed.

Three-dimensional (3D) density distribution of inhomogeneous dense deuterium tritium plasmas in laser fusion is revealed by the energy loss of fast protons going through the plasmas. The fast protons generated in the laser–plasma interaction can be used for the simulation of a plasma density diagnostics. The large linear and ill-posed equation set of the densities of all grids is obtained and then solved by the Tikhonov regularization method after dividing a 3D area into grids and knowing the initial and final energies of the protons. 3D density reconstructions with six proton sources are done without and with random noises added to the final energy. The revealed density is a little smaller than the simulated one in most simulated zones and the error is as much as those of 2D reconstructions with four proton sources. The picture element N is chosen as 2744 with consideration of smoothness and calculation memory of the computers. With fast calculation speed and low error, the Tikhonov regularization method is more suitable for 3D density reconstructions with large calculation amount than simultaneous iterative reconstruction method. Also the analytical expressions between the errors and the noises are established. Furthermore, the density reconstruction method in this paper is particularly suitable for plasmas with small density gradient. The errors without noises and with 2% noises added to the final proton energies are 3 and 20%, respectively, for the homogeneous plasma.

In the paper, we study the conditions for the generation of backward runaway electrons through a grounded grid cathode in atmospheric pressure air at high-voltage pulses with a full width at half maximum of 1 ns and risetime of 0.3 ns applied to the gap from a SLEP-150 pulser. The study confirms that backward runaway electrons and X-rays do arise near grid cathodes in atmospheric pressure air. It is shown that the current of the backward beam and the X-rays from the gas diode depend differently on the interelectrode distance. The average X-ray exposure dose in a pulse is more than 3.5 mR.

The paper proposes a new scheme of high-power microwave oscillator of twistron type using a moderately relativistic high-current electron beam. In numerical experiment using axisymmetric version of the completely electromagnetic PiC code KARAT, a 56% conversion efficiency of electron beam power to electromagnetic radiation was demonstrated. With 340 kV accelerating voltage, 3.3 kA electron beam current, and 2.2 T guiding magnetic field strength, the simulated microwave power was 630 MW at 9.7 GHz. The “electronic efficiency” of the source reaches 66%.

The overview of the recent results for discovery and investigations of a very exotic phenomenon – optical mirage in the X-ray spectral range – is presented. It was found that the mirage could be created in the form of coherent virtual point source, emerging in the vicinity of the second plasma in two-stage oscillator-amplifier X-ray laser. The X-ray source-mirage, rigidly phased with the initial radiation of generator, occurs only when amplification takes place in the amplifier plasma and leads to the appearance of the interference pattern in the form of concentric rings in the spatial profile of the output X-ray laser beam. The equation describing the emergence of X-ray mirage was found, numerical solution of which shows that its formation is similar to that of the optical mirages observed at propagation of light rays through an inhomogeneously heated air. Obtained results have already demonstrated novel comprehension into the physical nature of amplification of X-ray radiation, opening additional opportunities for X-ray interferometry, holography, and other applications, which require multiple rigidly phased sources of coherent radiation.

The effects of axial magnetic field on the properties of the ions ejected from Nd:YAG laser (wavelength = 1064 nm, pulse duration = 6 ns) produced expanding Cu plasma were investigated. A plane Cu target, without and with 0.23 T axial magnetic field at its surface, was irradiated in the fluence range of 2–24 J/cm2. The ions emitted along the target surface normal were analyzed with the help of ion collector and time-of-flight electrostatic ion energy analyzer. The integrated ion yield, highest ion charge state, average ion energy, and energy of individual ion charge states were found to increase by application of the magnetic field. The initial parameters of the non-equilibrium plasma such as average ion charge, equivalent potential, electron temperature, electron density, Debye length, and transient electric field were estimated from the experimental results obtained without and with application of the magnetic field. The increase of ion yield and ion charge state by application of magnetic field are most probably due to the trapping of electrons in front of the target surface, which boosts up the electron impact ionization process. The ion energy increment due to the magnetic field is discussed in the frame work of electrostatic model for ion acceleration in laser plasma.

The efficient transfer of angular orbital momentum from circularly polarized laser pulses into ions of solid density targets is investigated with different geometries using particle-in-cell simulations. The detailed electron and ion dynamics presented focus upon the energy and momentum conversion efficiency. It is found that the momentum transfer is more efficient for spiral targets and the maximum value is obtained when the spiral step is equal to twice the laser wavelength. This study reveals that the angular momentum distribution of ions strongly depends up on the initial target shape and density.

Laser-produced high-energy-density plasmas may contain strong magnetic fields that affect the energy transport, which can be nonlocal. Models which describe the magnetized nonlocal transport are formally complicated and based on many approximations. This paper presents a more straightforward approach to the description of the electron transport in this regime, based on the extension of a reduced entropic model. The calculated magnetized heat fluxes are compared with the known asymptotic limits and applied for studying of a magnetized nonlocal plasma thermalization.

Recent advances in the production of high repetition, high power, and short laser pulse have enabled the generation of high-energy proton beam, required for technology and other medical applications. Here we demonstrate the effective laser driven proton acceleration from near-critical density hydrogen plasma by employing the short and intense laser pulse through three-dimensional (3D) particle-in-cell (PIC) simulation. The generation of strong magnetic field is demonstrated by numerical results and scaled with the plasma density and the electric field of laser. 3D PIC simulation results show the ring shaped proton density distribution where the protons are accelerated along the laser axis with fairly low divergence accompanied by off-axis beam of ring-like shape.

In the present paper, we have investigated self-focusing of Gaussian laser beam in relativistic ponderomotive (RP) cold quantum plasma. When de Broglie wavelength of charged particles is greater than or equal to the inter particle distance or equivalently the temperature is less than or equal to the Fermi temperature, quantum nature of the plasma constituents cannot be ignored. In this context, we have reported self-focusing on account of nonlinear dielectric contribution of RP plasma by taking into consideration the impact of quantum effects. We have setup the nonlinear differential equation for the beam-width parameter by paraxial ray and Wentzel Kramers Brillouin approximation and solved it numerically by the Runge Kutta Fourth order method. Our results show that additional self-focusing is achieved in case of RP cold quantum plasma than relativistic cold quantum plasma and classical relativistic case. The pinching effect offered by quantum plasma and the combined effect of relativistic and ponderomotive nonlinearity greatly enhances laser propagation up to 20 Rayleigh lengths.

Nanosecond pulse discharges can provide high reduced electric field for exciting high-energy electrons, and the ultrafast rising time of the applied pulse can effectively suppress the generation of spark streamer and produce homogeneous discharges preionized by runaway electrons in atmospheric-pressure air. In this paper, the electrostatic field in a tube-plate electrodes gap is calculated using a calculation software. Furthermore, a simple physical model of nanosecond pulse discharges is established to investigate the behavior of the runaway electrons during the nanosecond pulse discharges with a rise time of 1.6 ns and a full-width at half-maximum of 3–5 ns in air. The physical model is coded by a numerical software, and then the runaway electrons and electron avalanche are investigated under different conditions. The simulated results show that the applied voltage, voltage polarity, and gas pressure can significantly affect the formation of the avalanche and the behavior of the runaway electrons. The inception time of runaway breakdown decreases when the applied voltage increases. In addition, the threshold voltage of runaway breakdown has a minimum value (10 kPa) with the variation of gas pressure.

PACS: 52.80.-s

This paper presents a scheme for excitation of an electron-plasma wave (EPW) by beating two q-Gaussian laser beams in an underdense plasma where ponderomotive nonlinearity is operative. Starting from nonlinear Schrödinger-type wave equation in Wentzel–Kramers–Brillouin (WKB) approximation, the coupled differential equations governing the evolution of spot size of laser beams with distance of propagation have been derived. The ponderomotive nonlinearity depends not only on the intensity of first laser beam, but also on that of second laser beam. Therefore, the dynamics of one laser beam affects that of other and hence, cross-focusing of the two laser beams takes place. Due to nonuniform intensity distribution along the wavefronts of the laser beams, the background electron concentration is modified. The amplitude of EPW, which depends on the background electron concentration, is thus nonlinearly coupled with the laser beams. The effects of ponderomotive nonlinearity and cross-focusing of the laser beams on excitation of EPW have been incorporated. Numerical simulations have been carried out to investigate the effect of laser and plasma parameters on cross-focusing of the two laser beams and further its effect on EPW excitation.

In this study, an atmospheric pressure cold plasma jet has been generated based on dielectric barrier discharge plasma. The double ring electrode configuration is used and analysis has been performed subjected to wide range of supply frequencies up to 25 kHz and supply voltage up to 6 kV. The electrical characterization of the plasma jet has been carried out using a high voltage probe. The V-I characteristics of the developed cold plasma jet have been studied and the consumption of the power has been analyzed at various input combinations of supply frequency and applied voltage. Consequently, the supply voltage and supply frequency are optimized with respect to the discharge current and jet length for optimum power consumption. The peak power consumed for glow discharge operation has been found to be 1.27 W in the optimized configuration.