The energy of protons accelerated by ultra-intense lasers in the target normal sheath acceleration (TNSA) mechanism can be greatly enhanced by the laser parameter optimization. We propose to investigate the optimization of laser parameters for proton acceleration using double laser pulses in TNSA mechanism. The sheath field generation at the rear side of the target is significantly affected by the introduction of second laser pulse in TNSA mechanism, and consequently, the energy of the accelerated protons is also modified. The second laser pulse was introduced with different delays to study its impact on proton acceleration. Our study shows that the interplay of laser intensity and pulse duration of both laser pulses affects the proton acceleration. It was found that the proton maximum energy is the function of both laser intensity and pulse duration. A number of simulations have been performed to obtain maximum proton energy data under different combinations of laser intensity and pulse duration for the two laser pulses. The simulation results account for the underline physics for the proton bunch energy and the sheath field as a function of pulse intensity and pulse delay.

Electron dynamics in an axially localized large amplitude electron Bernstein mode in a magnetic mirror is studied. The mode is localized due to plasma density and magnetic field profiles and could be driven by an electron cyclotron wave, launched from outside, via linear mode conversion. Energetic electrons of finite gyro-radius resonantly interact with the mode and gain primarily transverse energy favoring stronger mirror confinement. At Bernstein wave normalized amplitude of A00 = 0.01 and for other normalized parameters Zn0 = 40, k⊥c/ω = 10, ${L}^{\prime}_m = 215$, ωc0/ω = 0.9, ψn0 = 3π/2, the electrons can gain energy in the hundreds of keV range.

The plasma parameters of laser-ablated Zirconium (Zr) using a Langmuir probe technique have been investigated by employing a Q-switched Nd:YAG laser (532 nm, 6 ns) at various irradiances ranging from 8.6 to 15.5 GW/cm2. All the measurements have been performed under an ultra-high vacuum condition while keeping the probe at a fixed distance of 4 mm from the target. By varying the biasing voltages from 1 to 75 V, the corresponding values of electric currents are measured by the probe on the oscilloscope. Laser-induced Zr plasma parameters such as electron temperature, electron number density, plasma potential, Debye length, and thermal velocity have been evaluated from I–V characteristic curves of Langmuir probe data. It is found that both the electron temperature and thermal velocity of Zr plasma reveal an increasing trend from 18 to 41 eV and 2.8 × 108 to 4.3 × 108 cm/s, respectively, with increasing laser irradiance which is attributed to more energy deposition and enhanced ablation rate. However, the electron number density of Zr plasma exhibits a non-significant increase from 6.5 × 1014 to 6.7 × 1014 cm−3 with increasing irradiance from 8.6 to 10.9 GW/cm2. A further increase in irradiance from 12 to 15.5 GW/cm2 causes a reduction in the number density of Zr plasma from 6.1 × 1014 to 5.6 × 1014 cm−3 which is attributed to the formation of thick sheath, ambipolar electric field, and laser-supported detonation waves (Shock front). Scanning electron microscope analysis has been performed to reveal the surface morphology of irradiated Zr. It reveals the formation of cracks, ridges, cones, and grains. It was observed at high irradiances the ridges are vanished, whereas cones and cracks are dominant features. By controlling plasma parameters, surface structuring of materials can be controlled, which has a vast range of applications in the industry and medicine.

We present the experimental optimization of electrons in the several hundred keV energy range originated from laser-irradiated wire targets. Accelerated by a femtosecond laser pulse, an electron pulse emitted from the wire target was collimated immediately along the wire to a filter unit for the manipulation of energy and spatial distributions. It is shown in simulation that with a pair of magnets as the filter unit, the optimized electrons could serve as a compact and tunable electron source. The proposed system was demonstrated in a proof-of-principle experiment where we attained 1 fC bunch charge with transverse coherence length approaching 1 nm based on a 0.2 TW laser platform. This indicates the scheme as a promising candidate for single-shot electron diffraction.

We study dynamics, structure and organization of the new paradigm of wavewrinkle structures associated with multipulse laser-induced RayleighTaylor (RT) instability in the plane of a target surface in the circumferential zone (C-zone) of the spot. Irregular target surface, variation of the fluid layer thickness and of the fluid velocity affect the nonlinearity and dispersion. The fluid layer inhomogeneity establishes local domains arranged (organized) in the «domain network». The traveling wavewrinkles become solitary waves and latter on become transformed into stationary soliton wavewrinkle patterns. Their morphology varies in the radial direction ofaussian-like spot ranging from the compacton-like solitons to the aperiodic rectangular waves (with rounded top surface) and to the periodic ones. These wavewrinkles may be successfully juxtapositioned with the exact solution of the nonlinear differential equations formulated in the KadomtsevPetviashvili sense taking into account the fluid conditions in particular domain. The cooling wave that starts at the periphery by the end of the pulse causes sudden increase of density and surface tension: the wavewrinkle structures become unstable what causes their break-up. The onset of solidification causes formation of an elastic sheet which starts to shrink generating lateral tension on the wavewrinkles. The focusing of energy at the constrained boundary causes the formation of wrinklons as the new elementary excitation of the elastic sheets.

In a collisionless shock, there are no binary collisions to isotropize the flow. It is therefore reasonable to ask to which extent the magnetohydrodynamics (MHD) jump conditions apply. Following up on recent works which found a significant departure from MHD in the case of parallel collisionless shocks, we here present a model allowing to compute the density jump for collisionless shocks. Because the departure from MHD eventually stems from a sustained downstream anisotropy that the Vlasov equation alone cannot specify, we hypothesize a kinetic history for the plasma, as it crosses the shock front. For simplicity, we deal with non-relativistic pair plasmas. We treat the cases of parallel and perpendicular shocks. Non-MHD behavior is more pronounced for the parallel case where, according to MHD, the field should not affect the shock at all.

We present a theory for describing the inner structure of the electron bunch in the bubble regime starting from a random distribution of electrons inside the bubble and subsequently minimizing the system's energy. Consequently, we find a filament-like structure in the direction of propagation that is surrounded by various shells consisting of further electrons. If we specify a two-dimensional (2D) initial structure, we observe a hexagonal structure for a high number of particles, corresponding to the close packing of spheres in two dimensions. The 2D structures are in agreement with the equilibrium slice model.

In this paper, we characterize a high repetition-rate regenerating plasma mirror produced by the thin film of liquid formed when two laminar streams collide. The use of a flowing liquid film is inexpensive and the interaction surface refreshes automatically, avoiding buildup of on-target debris. The composition of the liquid material and the relative angle of the film-generating nozzles was optimized for this application. Spectra measured in reflection from a water-based plasma mirror showed a blue shift but an optical reflectivity of up to 30%. The thickness of the film was found to be of the order of 2 ${\rm \mu}$m, and the stability of the reflected spot was ${\approx }1$ mrad. The reflected beam profile was highly distorted but stable. Further optimization of the nozzles to affect the fluid flow should enable significant improvements in control of the fluid films and increase in the reflectivity of these mirrors.

For the guarantee of the long-distance transport of the bunches of China Initiative Accelerator Driven System (CIADS), a new scheme is proposed that extra magnetic field is used in the accelerator-target coupling section before the windowless target to minimize the self-modulation (SM) mechanism. Particle-in-cell simulations are carried out to study the influence of the solenoidal magnetic field on the self-modulation mechanism when long proton bunches move in the background plasmas. The long proton bunches used in the simulations are similar to these in the linear accelerator of CIADS. It is found that the presence of the solenoidal magnetic field will significantly inhibit the self-modulation process. For the strong magnetic field, the longitudinal separation and transverse focusing of the long bunches disappear. We attribute these phenomena to the reason that the strong solenoidal magnetic field restricts the transverse movement of plasma electrons. Thus, there are not enough electrons around the bunch to compensate the space charge effect. Moreover, without transverse current, the longitudinal pinched effect disappears, and the long bunch can not be separated into small pulses anymore.

Increasing the output power of a long-wavelength free-electron laser (FEL), despite the destroying effects of beam energy spread, is studied using the optimal pre-bunching of the thermal electron beam along with the optimal tapering of the planar wiggler magnetic field. A set of self-consistent coupled nonlinear differential equations in three dimensional that describe the evolution of radiation and electron beam in the interaction zone are solved numerically by the Runge–Kutta method. The axial energy spread is considered and it degrades the FEL performance by reducing the saturation power and increasing the saturation length. To compensate these destroying effects, the optimum function or degree of electron beam pre-bunching and optimum parameters of wiggler tapering are found by the successive runs of the simulation code.

The X-ray emissions in the interaction of 3–6 MeV Xe23+ ions into thick solid In target are measured. The projectile-to-target and target Lα/Lβ X-ray production intensity ratios are observed to strongly depend on the projectile energy. The dependence deviates from Coulomb ionization predictions, which implies the important roles of coupling between subshells and the activation of 4fσ rotational couplings for projectile energy larger than 5 MeV.

We observe experimentally periodic proton beam filamentation in laser-produced dense plasma using multilayered (CH–Al–CH) sandwich targets. The accelerated MeV proton beams from these targets exhibit periodic frozen filaments up to 5–10 µm as a result of resistive Weibel instabilities in the expanding plasma. The evolution of strong self-generated resistive magnetic fields at the targets interface is attributed to such plasma effects, which are supported, by our theory and simulations. We suggest that the resistive Weibel instability could be effectively employed to understand the evolution of magnetic fields in laser-generated plasma in the astrophysics scenario or the advanced fast igniter approach of the inertial confinement fusion.

The possibilities of surface plasma wave (SPW) on a metal-vacuum interface in semiconductor quantum plasma by considering the effects of Coulomb exchange (CE) interaction and the spin-polarization has been explored. The dispersion for the SPW has been setup using the modified quantum hydrodynamic (QHD) model taking into account the Fermi pressure, the quantum Bohm force, the CE, and the electron spin. The optical gain of SPW has been evaluated. It is found that CE effects and spin-polarization increases the wave frequency and enhances the gain during the stimulated emission.

In this paper, the generation of relativistic electron mirrors (REM) and the reflection of an ultra-short laser off the mirrors are discussed, applying two-dimension particle-in-cell simulations. REMs with ultra-high acceleration and expanding velocity can be produced from a solid nanofoil illuminated normally by an ultra-intense femtosecond laser pulse with a sharp rising edge. Chirped attosecond pulse can be produced through the reflection of a counter-propagating probe laser off the accelerating REM. In the electron moving frame, the plasma frequency of the REM keeps decreasing due to its rapid expansion. The laser frequency, on the contrary, keeps increasing due to the acceleration of REM and the relativistic Doppler shift from the lab frame to the electron moving frame. Within an ultra-short time interval, the two frequencies will be equal in the electron moving frame, which leads to the resonance between laser and REM. The reflected radiation near this interval and corresponding spectra will be amplified due to the resonance. Through adjusting the arriving time of the probe laser, a certain part of the reflected field could be selectively amplified or depressed, leading to the selective adjustment of the corresponding spectra.