In some Global Positioning System (GPS) signal propagation environments, especially in the ionosphere and urban areas with heavy multipath, GPS signal encounters not only additive noise but also multiplicative noise. In this paper we compare and contrast the conventional GPS signal acquisition method which focuses on handling GPS signal acquisition with additive noise, with the enhanced GPS signal processing under multiplicative noise by proposing an extension of the GPS detection mechanism, to include the GPS detection model that explains detection of the GPS signal under additive and multiplicative noise. For this purpose, a novel GPS signal detection scheme based on high order cyclostationarity is proposed. The principle is introduced, the GPS signal detection structure is described, the ambiguity of initial PseudoRandom Noise (PRN) code phase and Doppler shift of GPS signal is analysed. From the simulation results, the received GPS signal at low power level, which is degraded by additive and multiplicative noise, can be detected under the condition that the received block of GPS data length is at least 1·6 ms and sampling frequency is at least 5 MHz.

This paper presents the second part of the research activities carried out to develop a novel Global Navigation Satellite System (GNSS) Avionics-Based Integrity Augmentation (ABIA) system for manned and Unmanned Aerial Vehicle (UAV) applications. The ABIA system's architecture was developed to allow real-time avoidance of safety-critical flight conditions and fast recovery of the required navigation performance in case of GNSS data losses. In more detail, our novel ABIA system addresses all four cornerstones of GNSS integrity augmentation in mission- and safety-critical avionics applications: prediction (caution flags), avoidance (optimal flight path guidance), reaction (warning flags) and correction (recovery flight path guidance). Part 1 (Sabatini et al., 2012) presented the ABIA concept, architecture and key mathematical models used to describe GNSS integrity issues in aircraft applications. This second part addresses the ABIA caution and warning integrity flags criteria and presents the results of a simulation case study performed on the TORNADO Interdiction and Strike (IDS) aircraft.

Communicating location-specific information to pedestrians is a challenging task which can be aided by user-friendly digital technologies. In this paper, landmark visibility analysis, as a means for developing more usable pedestrian navigation systems, is discussed. Using an algorithmic framework for image-based 3D analysis, this method integrates a 3D city model with identified landmarks and produces raster visibility layers for each one. This output enables an Android phone prototype application to indicate the visibility of landmarks from the user's actual position. Tested in the field, the method achieves sufficient accuracy for the context of use and improves navigation efficiency and effectiveness.

This paper presents accurate orbit determination (OD) of the Iran University of Science and Technology Satellite (IUSTSAT) from Global Positioning System (GPS) data. The GPS position data are treated as pseudo-measurements within an onboard orbit determination process that is based on the numerical integration of the equations of motion using an earth gravity model and applying an Extended Kalman Filter for the data processing. In this paper, through accurate tuning of GPS duty cycle and on/off time intervals, a solution is suggested to achieve the desired OD accuracy despite power constraints. Moreover, a new scheme for automatic fault management in the orbit determination system is derived that provides fault detection and accommodation features.

Ultra Short Baseline (USBL) navigation systems are often faced with positioning errors arising from misalignments between sensors. This paper proposes a line survey method for USBL angular alignment calibration. In the scheme of USBL line survey, mathematical representations of positioning error arising from heading, pitch and roll misalignments are derived, respectively. The effect of each misalignment angle and how the differences can be used to calibrate each misalignment angle in turn are presented. An iterative algorithm that takes advantage of the geometry of position errors resulting from angular misalignments is developed for USBL calibration. Numerical simulations are provided to demonstrate the effectiveness of the USBL line survey approach. In addition, the effect of measurement error on the estimation of roll alignment error is evaluated and discussed.

This study investigates the accuracy of an online Precise Point Positioning (PPP) service operated by the Geodetic Survey Division of Natural Resources Canada (NRCan), Canadian Spatial Reference System (CSRS)-PPP, by using single/dual-frequency Global Positioning System (GPS) data collected by dual-frequency geodetic-grade and Original Equipment Manufacturer (OEM) board type single-frequency GPS receivers. In this work, a kinematic test was carried out in Halic Bay (Golden Horn), Istanbul, Turkey, to assess the performance of the PPP method in a dynamic environment. Based on this study, it can be concluded that the coordinates estimated from the online CSRS-PPP service have a potential of about metre-level accuracy by processing single frequency data collected by an OEM receiver and about a decimetre to a few centimetres level accuracy by processing dual frequency data collected by a geodetic-grade receiver. In general, results show that the PPP technique has become a significant alternative to the conventional relative (differential) positioning techniques (i.e., Differential GPS (DGPS), Real-time Kinematic (RTK)). The technique does not suffer from the drawbacks of the DGPS technique and has potential to provide the same position accuracy without the requirement for a reference station. Consequently, it has been concluded that the PPP technique may be effectively used in marine applications due to its ease of use and provision of high accuracy, as well as being able to offer reduced field operational costs.

In the liner shipping market carriers share container slots to offer better service and realize economies of scale. This paper studies slot co-allocation planning for a joint fleet in a round trip for a shipping alliance in the liner shipping industry. In particular, a conceptual model is developed based on joint fleet and slot co-allocation management. The factors affecting slot co-allocation planning are explored in detail. A large-scale integer programming model is formulated to guide carriers in an alliance in pursuing an optimal slot co-allocation strategy. In contrast to the existing research, this approach leads to a more accurate representation of the situation for cooperative services in the liner shipping market. Extensive numerical experiments based on a true Asia-Europe cooperative route of COSCO and HANJIN show that the proposed model can be efficiently solved by LINGO11.0 for the case study. The computational results suggest that the mechanism and model can be used to benefit carriers in making better decisions in shipping cooperation services.

As Earth-based radio tracking navigation is severely limited because of communications constraints and low relative navigation accuracy, autonomous optical navigation capabilities are essential for both robotic and manned deep-space exploration missions. Image processing is considered one of the key technologies for autonomous optical navigation to extract high-precision navigation observables from a raw image. New image processing algorithms for deep-space autonomous optical navigation are developed in this paper. First, multiple image pre-processing and the Canny edge detection algorithm are adopted to identify the edges of target celestial bodies and simultaneously remove the potential false edges. Secondly, two new limb profile fitting algorithms are proposed based on the Least Squares method and the Levenberg-Marquardt algorithm, respectively, with the assumption that the perspective projection of a target celestial body on the image plane will form an ellipse. Next, the line-of-sight (LOS) vector from the spacecraft to the centroid of the observed object is obtained. This is taken as the navigation measurement observable and input to the navigation filter algorithm. Finally, the image processing algorithms developed in this paper are validated using both synthetic simulated images and real flight images from the MESSENGER mission.

Despite continuous efforts to improve shipping safety, groundings are still the prime cause of large scale oil pollution of the marine environment. As the bridge operator remains the most important part of navigation, the provision of tools which promote his understanding of the threats which lie ahead of the ship has become a permanent challenge. In this work, the use of a hull-mounted forward-looking sonar as a navigational aid for grounding avoidance and ultimately as an associated oil-spill risk control option for oil tankers is examined according to the Formal Safety Assessment (FSA) approach. In this context, the sonar's oil-spill risk reduction potential and its overall cost were estimated and assessed against the Cost of Averting a Ton of oil Spilled (CATS) criterion. It was found that the currently available sonar technology has a maximum detection range which is adequate for the avoidance of powered groundings in the case of small-sized oil tankers only. However, for this ship size category, the attained oil-spill risk reduction was found to be low and sonar use was proved to be cost ineffective. However, it was found that sonar technology will offer sizable oil-spill risk reduction in large-sized oil tankers and their requirement for longer sonar detection range can be easily met cost-effectively as an oil-spill risk control option for ships of this size.