Hostname: page-component-cd9895bd7-7cvxr Total loading time: 0 Render date: 2024-12-28T14:33:34.344Z Has data issue: false hasContentIssue false
  • English
  • Français

Challenges to the use of ion irradiation for emulating reactor irradiation

Published online by Cambridge University Press:  13 April 2015

Gary S. Was
Gary S. Was*
Affiliation:
University of Michigan, Ann Arbor, Michigan 48109, USA
*
a)Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

Development of new materials for current and advanced reactor concepts is hampered by long lead times and high cost of reactor irradiations coupled with the paucity of test reactors. Ion irradiation offers many advantages for emulating the microstructures and properties of materials irradiated in reactors but also poses many challenges. Nevertheless, there is a growing body of evidence, primarily for light ion (proton) irradiation showing that many, if not all of the features of the irradiated microstructure and properties, can be successfully emulated by careful selection of irradiation parameters based on differences in the damage processes between ion and neutron irradiation. While much less has been done to benchmark heavy- or self-ion irradiation, recent work shows that under certain conditions, the complete suite of features of the irradiated microstructure can be emulated. This study summarizes the contributions of ion irradiation to our understanding of irradiation effects, the options for emulating radiation effects in reactors, and experience with both proton irradiation and heavy ion irradiation.

Keywords

ion-solid interactionsradiation effectsmicrostructure
Type
Invited Review
Information
Journal of Materials Research , Volume 30 , Issue 9: Focus Issue: Characterization and Modeling of Radiation Damage on Materials: State of the Art, Challenges, and Protocols , 14 May 2015 , pp. 1158 - 1182
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

Contributing Editor: Djamel Kaoumi

References

REFERENCES

Guerin, Y., Was, G.S., and Zinkle, S.J.: Materials challenges for advanced nuclear energy systems. MRS Bulletin 34(1), 10 (2009).Google Scholar
Lee, E.H., Maziasz, P.J., and Rowcliffe, A.F.: The structure and composition of phases occurring in austenitic stainless steels in thermal and irradiation environments. In Phase Stability During Irradiation, Holland, J.R., Mansur, L.K., and Potter, D.I. eds.; The Metallurgical Society of AIME: New York, 1981; p. 191.Google Scholar
Okamoto, P.R. and Rehn, L.E.: Radiation induced segregation in binary and ternary alloys. J. Nucl. Mater. 83(1), 2 (1979).CrossRefGoogle Scholar
Nelson, R.S., Hudson, J.A., and Mazey, D.J.: The stability of precipitates in an irradiation environment. J. Nucl. Mater. 44(3), 318 (1972).CrossRefGoogle Scholar
Boothby, R.M.: The microstructure of fast neutron irradiated Nimonic PE16. J. Nucl. Mater. 230(2), 148 (1996).CrossRefGoogle Scholar
Sklad, P.S., Clausing, R.E., and Bloom, E.E.: Effects of neutron irradiation on microstructure and mechanical properties of nimonic PE-16. In Irradiation Effects on the Microstructure and Properties of Metals, Shober, F.R. ed.; American Society for Testing and Materials: Philadelphia, PA, 1976; p. 139.CrossRefGoogle Scholar
Marwick, A.D.: Solute segregation and precipitate stability in irraiated alloys. Nucl. Instrum. Methods 182–183, 827 (1981).CrossRefGoogle Scholar
Rowcliffe, A.F., Mansur, L.K., Hoelzer, D.T., and Nanstad, R.K.: Perspectives on radaition effects in nickel-base alloys for applications in advanced reactors. J. Nucl. Mater. 392(2), 341 (2009).CrossRefGoogle Scholar
Was, G.S. and Averback, R.S.: Radiation damage using ion beams. In Comprehensive Nuclear Materials, Vol. 1, Konings, R.J.M. ed.; Elsevier: Amsterdam, 2012; p. 195.CrossRefGoogle Scholar
Jung, P., Chaplin, R.L., Fenzl, H.J.. Reichelt, K., and Wombacher, P.: Anisotropy of the threshold energy for production of frenkel pairs in copper and platinum. Phys. Rev. B 8, 553 (1973).CrossRefGoogle Scholar
Vajda, P.: Anisotropy of electron radiation damage in metal crystals. Rev. Mod. Phys. 49, 481 (1977).CrossRefGoogle Scholar
King, W.E., Merkle, K.L., and Meshii, M.: Determination of the threshold surface for copper using in situ electrical resistivity measurements in the high voltage electron microscope. Phys. Rev. B 23, 6319 (1981).Google Scholar
Gibson, J.B., Goland, A.N., Milgram, M., and Vineyard, G.H.: Dynamics of radiation damage. Phys. Rev. 120, 1229 (1960).Google Scholar
Lucasson, P.: The production of Frenkel defects. In Fundamental Aspects of Radiation Damage in Metals, Robinson, M.T. and Young, F.W. Jr. eds.; ERDA Report CONF-751006, 1975; p. 42.Google Scholar
Corbett, J.W., Smith, R.B., and Walker, R.M.: Recovery of electron-irradiated copper. I. Close pair recovery. Phys. Rev. 114, 1452 (1959).Google Scholar
Burger, G., Isebeck, K., Volkl, J., Schilling, W., and Wenzl, H.: Low-temperature recovery spectra of neuron-irradiated metals. Z. Angew. Phys. 36, 3356 (1965).Google Scholar
Garr, K.R. and Sosin, A.: Recovery of electron-irradiated aluminum and aluminum alloys. II. Stage II. Phys. Rev. 162, 669 (1967).CrossRefGoogle Scholar
Ehrhart, P.: Introduction for atomic defects and diffusion, atomic defects in metals. In Landolt-Bornstein New Series, Group III, Vol. 25, Ullmaier, H. ed.; Springer: Berlin, 1991; p. 115.Google Scholar
Averback, R.S. and de la Rubia, T.D.: Displacement damage in irradiated metals and semiconductors. Solid State Phys. 51, 281 (1997).CrossRefGoogle Scholar
Rehn, L.E., Okamoto, P.R., and Averback, R.S.: Relative efficiencies of different ions for producing freely migrating defects. Phys. Rev. B 30, 3073 (1984).CrossRefGoogle Scholar
Wei, L.C., Lang, E., Flynn, C.P., and Averback, R.S.: Freely migrating defects in ion-irradiated Cu3Au. Appl. Phys. Lett. 75, 805 (1999).CrossRefGoogle Scholar
Fielitz, P., Macht, M-P., Naundorf, V., and Wollenberger, H.: Atom transport under ion irradiation. J. Nucl. Mater. 251, 123 (1997).Google Scholar
Okamoto, P.R., Harkness, S.D., and Laidler, J.J.: Solute segregation to voids during electron irradiation. ANS Trans. 16, 70 (1973).Google Scholar
Okamoto, P.R. and Wiedersich, H.: Segregation of alloying elements to free surfaces during irradiation. J. Nucl. Mater. 53, 336 (1974).Google Scholar
Rehn, L.E.: Surface modification and radiation-induced segregation. In Metastable Materials Formation by Ion Implantation, Picraux, S.T. and Choyke, W.J. eds.; Elsevier Science: New York, 1982; p. 17.Google Scholar
Schmitz, G., Ewert, J.C., Harbsmeier, F., Uhrmacher, M., and Haider, F.: Phase stability of decomposed Ni-Al alloys under irradaition. Phys. Rev. B. 63, 224113 (2001).Google Scholar
Enrique, R.A., Nordland, K., Averback, R.S., and Bellon, P.: Simulation of dynamical stabilization of Ag-Cu nanocomposites by ion beam processing. J Appl. Phys. 93, 2917 (2003).CrossRefGoogle Scholar
Enrique, R.A. and Bellon, P.: Compositional patterning in systems driven by competing dynamics of different length scale. Phys. Rev. Lett. 84, 2885 (2000).CrossRefGoogle ScholarPubMed
Averback, R.S.: Atomic displacement processes in irradiated metals. J. Nucl. Mater. 216, 49 (1994).CrossRefGoogle Scholar
Souidi, A., Hou, M., Becquart, C.S., Malerba, L., Domain, C., and Stoller, R.E.: On the correlation between primary damage and long-term nanostructural evolution in iron under irradiation. J. Nucl. Mater. 419, 122 (2011).CrossRefGoogle Scholar
Garner, F.A., Powell, R.W., Keefer, D.W., Pard, A.G., Garr, K.R., Nakata, M.M., Lauritzen, T., Bell, W.L., Johnston, W.G., Appleby, W.K., Diamond, S., Baron, M., Chickering, R., Bajaj, R., Bleiberg, M.L., Sprague, J.A., Smidt, F.A., and Westmoreland, J.E.: Summary report on the alloy development intercorrelation program experiment. In Proceedings of the Workshop of Neutron and Charged Particle Damage, CONF-760673, Oak Ridge National Laboratory: Oak Ridge, TN, 1976; p. 147.Google Scholar
Mansur, L.K.: Void swelling in metals and alloys under irradiation: An assessment of the theory. Nucl. Technol. 40, 5 (1978).CrossRefGoogle Scholar
Mansur, L.K.: Correlation of neutron and heavy-ion damage: II. The predicted temperature shift with swelling changes in radiation dose rate. J. Nucl. Mater. 78 156 (1978).Google Scholar
Mansur, L.K.: Theory of transitions in dose dependence of radiation effects in structural alloys. J. Nucl. Mater. 206 306 (1993).CrossRefGoogle Scholar
Ezawa, T. and Wakai, E.: Radiation-induced solute segregation in Al and Ni binary alloys under HVEM irradiation. Ultramicroscopy 39, 187 (1991).Google Scholar
Ashworth, J.A., Norris, D.I.R., and Jones, I.P.: Radiation-induced segregation in Fe-20Cr-25Ni-Nb based austenitic stainless steels. J. Nucl. Mater. 189, 289 (1992).Google Scholar
Wakai, E.: Radiation-induced segregation in Ni alloys by deuterium ion irradiations. Materials Trans. JIM 33(10), 884 (1992).Google Scholar
Whitley, J.B.: Thesis for Doctor of Philosophy - Nuclear Engineering, University of Wisconsin-Madison, 1978.Google Scholar
Garner, F.A.: Impact of the injected interstitial on the correlation of charged particle and neutron-induced radiation damage. J. Nucl. Mater. 117, 177 (1983).Google Scholar
Lee, E.H., Mansur, L.K., and Yoo, M.H.: Spatial variation in void volume during charged particle bombardment—The effects of injected interstitials. J. Nucl. Mater. 85–86, 577 (1979).CrossRefGoogle Scholar
Brailsford, A.D. and Mansur, L.K.: Effect of self-ion injection in simulation studies of void swelling. J. Nucl. Mater. 71, 110 (1977).Google Scholar
Was, G.S. and Allen, T.R.: Radiation damage from different particle types. In Radiation Effects in Solids, in NATO Science Series II: Mathematics, Physics and Chemistry, Vol. 235, Sickafus, K.E., Kotomin, E.A., and Uberuaga, B.P. eds.; Springer: Berlin, 2007; p. 65.Google Scholar
Gan, J. and Was, G.S.: Microstructure evolution in austenitic Fe-Cr-Ni alloys irradiated with Protons: Comparison with neutron-irradiated microstructures. J. Nucl. Mater. 297, 161 (2001).Google Scholar
Bruemmer, S.M., Edwards, D., and Simonen, E.: Characterization on Neutron-Irradiated 300 Series Stainless Steels to Assess Mechanisms of Irradiation-Assisted Stress Corrosion Cracking; EPRI Report 101496; Electric Power Research Institute: Palo Alto, CA, 2001.Google Scholar
Zinkle, S.J., Maziasz, P.J., and Stoller, R.E.: Dose dependence of the microstructural evolution in neutron-irradiated austenitic steel. J. Nucl. Mater. 206, 266 (1993).Google Scholar
Odette, G.R. and Lucas, G.E.: The effects of intermediated temperature irradiation on the mechanical behavior of 300-series austenitic stainless steels. J. Nucl. Mater. 179, 572 (1991).CrossRefGoogle Scholar
Maziasz, P.: Effects of Helium Content on Microstructural Development in Type 316 Stainless Steel Under Neutron Irradiation; Oak Ridge National Laboratory Report, ORNL-6121; Oak Ridge, TN, 1985.Google Scholar
Greenwood, L.R.: Fusion Reactor Materials Semiannual Progress Report for Period ending March 31, 1989, Office of Fusion Energy; DOE/ER-0313/6; 1989; p. 23.Google Scholar
Gan, J., Was, G.S., and Stoller, R.E.: Modeling of microstructure evolution in austenitic stainless steels irradiated under light water reactor conditions. J. Nucl. Mater. 299, 53 (2001).CrossRefGoogle Scholar
Sencer, B.H., Was, G.S., Sagisaka, M., Isobe, Y., Bond, G.M., and Garner, F.A.: Proton irradiation emulation of microstructural evolution of solution annealed 304 and cold-worked 316 stainless steels during irradiation in PWRs. J. Nucl. Mater. 323, 18 (2003).Google Scholar
Garner, F.A.: Chapter 6: Irradiation performance of cladding and structural steels in liquid metal reactors. In Materials Science and Technology: A Comprehensive Treatment, Vol. 10A, Frost, B.R.T. ed.; VCH: New York, 1994; p. 419.Google Scholar
Fujii, K., Fukuya, K., Furutani, G., Torimaru, T., Kohyama, A., and Kotah, Y.: Swelling in 316 stainless steels irradiated to 53 dpa in a PWR. In Proceedings of the Tenth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors, Ford, F.P., Was, G.S., and Nelson, J.L. eds.; NACE International: Houston, TX, 2000.Google Scholar
Edwards, D.J., Simonen, E.P., and Bruemmer, S.M.: Evolution of fine-scale defects in stainless steels neutron-irradiated at 275°C. J. Nucl. Mater. 317, 13 (2003).Google Scholar
Tournadre, L., Onimus, F., Bechade, J-L., Gibon, D., Cloue, J-M., Mardon, J-P., Feaugas, X., Toader, O., and Bachelet, C.: Experimental study of the nucleation and growth of c-component loops under charged particle irradiations of recrystallized Zircaloy-4. J. Nucl. Mater. 425, 76 (2012).CrossRefGoogle Scholar
Tournadre, L., Onimus, F., Bechade, J-L., Gibon, D., Cloue, J-M., Mardon, J-P., and Feaugas, X.: Toward a better understanding of the hydrogen impact on the radiation induced growth of zirconium alloys. J. Nucl. Mater. 441, 222 (2013).Google Scholar
Griffiths, M.: Microstructure evolution in Zr alloys during irradiation: Dose, dose rate, and impurity dependence. In Zirconium in the Nuclear Industry: Fifteenth international Symposium STP 1505, Bruce, K., Magnus, L., eds. American Society for Testing and Materials: Philadelphia, PA, 2009; p. 19.Google Scholar
De Carlan, Y., Gilbon, D., Griffiths, M., Lemaignan, C., and Regnard, C.: Influence of iron in the nucleation of <c> component dislocation loops in irradiated Zircaloy-4. In Zirconium in the Nuclear Industry: Eleventh International Symposium, STP 1295, Bradley, E.R., Sabol, G.P., eds. American Society for Testing and Materials: Philadelphia, PA, 1996; p. 638.Google Scholar
Griffiths, M. and Gilbert, R.W.: The formation of c-component defects in zirconium alloys during neutron irradiation. J. Nucl. Mater. 150(2), 169 (1987).CrossRefGoogle Scholar
Griffiths, M., Gilbert, R.W., Fidleris, V., Tucker, R.P., and Adamson, R.B.: Neutron damage in zirconium alloys irradiated at 644 to 710K. J. Nucl. Mater. 150(2), 159 (1987).CrossRefGoogle Scholar
Fukuda, T., Aoki, T., Isobe, Y., Hasegawa, A., and Abe, K.: Microchemical and microstructural changes of austenitic steels caused by proton irradiation following helium implantation. J. Nucl. Mater. 258–263, 1694 (1998).Google Scholar
Was, G.S. and Allen, T.: Radiation induced segregation in multicomponent alloys: Effect of particle type. Mater. Charact. 32(4), 239 (1994).Google Scholar
Asano, K., Fukuya, K., Nakata, K., and Kodama, M.: Changes in grain boundary composition induced by neutron irradiation on austenitic stainless steels. In Proceedings of the Fifth International Symposium on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors, Cubicciotti, D., Simonen, E.P., and Gold, R. eds.; American Nuclear Society, La Grange Park, IL, 1992; p. 838.Google Scholar
Was, G.S., Busby, J.T., Gan, J., Kenik, E.A., Jenssen, A., Bruemmer, S.M., Scott, P.M., and Andresen, P.L.: Emulation of neutron irradiation effects with protons: Validation of principle. J. Nucl. Mater. 300, 198 (2002).Google Scholar
Scott, P., Materials Reliability Program: A Review of the Cooperative Irradiation Assisted Stress Corrosion Cracking Research Program (MRP-98); 1002807; EPRI, Palo Alto, CA, 2003.Google Scholar
Stephenson, K.J. and Was, G.S.: Comparison of the microstructure, deformation and crack initiation behavior of austenitic stainless steel irradiated in-reactor or with protons. J. Nucl. Mater. 456, 85–98 (2015).Google Scholar
Busby, J.T. and Was, G.S., The Use of Proton Irradiation to Determine IASCC Mechanisms in Light Water Reactors: Phase 2: Commercial Alloys; 1009898; EPRI, Palo Alto, CA, 2005.Google Scholar
Busby, J.T. and Was, G.S.: The Use of Proton Irradiation to Determine IASCC Mechanisms in Light Water Reactors: Solute Addition Alloys; 1007440; EPRI, Palo Alto, CA, 2003.Google Scholar
Edwards, D.J., Schemer-Kohrn, A., and Bruemmer, S.: Characterization of Neutron-Irradiated 300-Series Stainless Steels; EPRI Report 1009896; Electric Power Research Institute: Palo Alto, CA, 2006.Google Scholar
Edwards, D.J.: Personal communication, 2012.Google Scholar
Jiao, Z., Was, G.S., and Busby, J.T.: The role of localized deformation on IASCC of proton-irradiated austenitic stainless steel. In 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors, Allen, T.R., Busby, J.T., and King, P.J. eds.; CANS: Whistler, British Columbia, 2007; p. 1.Google Scholar
Cann, C.D., So, C.B., Styles, R.C., and Coleman, C.E.: Precipitation in Zr-2.5Nb enhanced by proton irradiation. J. Nucl. Mater. 205, 267 (1993).Google Scholar
Urbanic, V.F. and Gilbert, R.W.: Effect of microstructure on the corrosion of Zr-2.5%Nb alloys. In Proceedings of the On fundamental Aspects of Corrosion on Zirconium-Based Alloys in Water Reactor Environment, International atomic energy Agency: Vienna, 1990; p. 262. IWGFPT/34.Google Scholar
Coleman, C.E., Gilbert, R.W., Carpenter, G.J.C., and Weatherly, G.C.: Precipitation in Zr-2.5 wt% Nb during neutron irradiation. In Phase Stability During Irradiation, Holland, J.R., Mansur, L.K., and Potter, D.I. eds.; The Metallurgical Society of AIME: New York, 1981; p. 587.Google Scholar
Shen, H.H., Peng, S.M., Xiang, X., Naab, F.N., Sun, K., and Zu, X.T.: Proton irradiation effects on the precipitate in a Zr-1.6Sn-0.6Nb-0.2Fe-0.1Cr alloy. J. Nucl. Mater. 452, 335 (2014).CrossRefGoogle Scholar
Griffiths, M.: A review of microstructure evolution in zirconium alloys during irradiation. J. Nucl. Mater. 159, 190 (1988).Google Scholar
Zu, X.T., Sun, K., Atzmon, M., Wang, L.M., You, L.P., Wan, F.R., Busby, J.T., Was, G.S., and Adamson, R.B.: Effect of proton and Ne irradiation on the microstructure of Zircaloy 4. Philos. Mag. 85(4–7), 649 (2005).Google Scholar
Francis, E.M., Harte, A., Frankel, P., Haigh, S.J., Jadernas, D., Romero, J., Hallstadius, L., and Preuss, M.: Iron redistribution in a zirconium alloy after neutron and proton irradiation studied by energy-dispersive X-ray spectroscopy (EDX) using an aberration-corrected (scanning) transmission electron microscope. J. Nucl. Mater. 454, 387 (2014).CrossRefGoogle Scholar
Higgy, H.R. and Hammad, F.H.: Effect of fast-neutron irradiation on mechanical properties of stainless steels: AISI types 304, 316 and 347. J. Nucl. Mater. 55, 177 (1975).Google Scholar
Hamilton, M.L., Garner, F.A., Hankin, G.L., Faulkner, R.G., and Toloczko, M.B.: Neutron-induced evolution of mechanical properties of 20% cold-worked 316 stainless steel as observed in both miniature tensile and TEM shear punch specimens. In Effects of Radiation on Materials: 19th International Symposium, ASTM STP 1366, Hamilton, M.L., Kumar, A.S., Rosinski, S.T., and Grossbeck, M.L. eds.; American Society for Testing and Materials, West Conshohocken, PA, 2000; p. 1003.CrossRefGoogle Scholar
Busby, J.T., Hash, M.C., and Was, G.S.: The relationship between hardness and yield stress in irradiated austenitic and ferritic steels. J. Nucl. Mater. 336, 267 (2005).CrossRefGoogle Scholar
Was, G.S., Hash, M., and Odette, G.R.: Proton irradiation of model and commercial pressure vessel steels. Philos. Mag. 85(4–7), 703 (2005).Google Scholar
Odette, G.R., Yamamoto, T., and Klingensmith, D.: A Compilation of Hardening and Microstructural Evolution Data for Ferritic Model Alloys Irradiated in the UCSB IVAR Program, UCSB-NRC-LR-04/2, 2004.Google Scholar
Alexander, D.E., Rehn, L.E., Odette, G.R., Lucas, G.E., Klingensmith, D., and Gragg, D.: Understanding the role of defect production in radiation embrittlement of reactor pressure vessels. In Proceedings of the Ninth International Conference on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors, Bruemmer, S.M., Ford, F.P., and Was, G.S. eds.; Minerals Metals & Materials Society: Warrendale, PA, 1999; p. 827.Google Scholar
Shimada, S. and Nagai, M.: Evaluation of the resistance of irradiated zirconium-liner cladding to iodine-induced stress corrosion cracking. J. Nucl. Mater. 114, 305 (1983).CrossRefGoogle Scholar
Farrell, K., Byun, T.S., and Hashimoto, N.: Deformation mode maps for tensile deformation of neutron-irradiated structural alloys. J. Nucl. Mater. 335, 471 (2004).Google Scholar
Jiao, Z., Busby, J.T., and Was, G.S.: Deformation microstructure of proton-irradiated stainless steels. J. Nucl. Mater. 361, 218 (2007).Google Scholar
Jiao, Z. and Was, G.S.: Localized deformation, and IASCC initiation in austenitic stainless steels. J. Nucl. Mater. 382, 203 (2008).CrossRefGoogle Scholar
Jiao, Z. and Was, G.S.: The role of irradiated microstructure in the localized deformation of austenitic stainless steels. J. Nucl. Mater. 407, 34 (2010).Google Scholar
Jiao, Z. and Was, G.S.: Impact of localized deformation on IASCC in austenitic stainless steels. J. Nucl. Mater. 408, 246 (2011).Google Scholar
Jiao, Z., McMurtrey, M.D., and Was, G.S.: Strain-induced precipitate dissolution in an irradiated austenitic alloy. Scr. Mater. 65(2), 159 (2011).Google Scholar
Jiao, Z., Was, G.S., Miura, T., and Fukuya, K.: Aspects of ion irradiations to study localized deformation in austenitic stainless steels. J. Nucl. Mater. 425, 328 (2014).Google Scholar
Fournier, L., Serres, A., Auzoux, Q., Leboulch, D., and Was, G.S.: Proton irradiation effect on microstructure, strain localization and iodine-induced stress corrosion cracking in Zircaloy-4. J. Nucl. Mater. 384, 38 (2009).Google Scholar
Onimus, F., Monnet, I., Bechade, J.L., Prioul, C., and Pilvin, P.: A statistical TEM investigation of dislocation channeling mechanism in neutron irradiated zirconium alloys. J. Nucl. Mater. 328, 165 (2004).Google Scholar
Northwood, D.O., Gilbert, R.W., Bahen, L.E., Kelly, P.M., Blake, R.G., Jostsons, A., Madden, P.K., Faulkner, D., Bell, W., and Adamson, R.B.: Characterization of neutron irradiation damage in zirconium alloys—An international “round-robin” experiment. J. Nucl. Mater. 79, 379 (1979).Google Scholar
Scholz, R. and Matera, R.: Proton irradiation creep of Inconel 718 at 300°C. J. Nucl. Mater. 283–287, 414 (2000).CrossRefGoogle Scholar
Baicry, J., Mardon, J.P., and Morize, P.: Effect of irradiation at 588K on mechanical properties and deformation behavior of zirconium alloy strip. In Proceedings of the Seventh International Symposium on Zirconium in the Nuclear Industry, ASTM STP 939, Adamson, R.B. and Van Swam, L.F.P. eds.; American Society for Testing and Materials: West Conshohocken, PA, 1987; p. 101.Google Scholar
Sencer, B.H., Was, G.S., Yuya, H., Isobe, Y., Sagisaka, M., and Garner, F.A.: Cross-sectional TEM and X-ray examination of radiation-induced stress relaxation of peened stainless steel surfaces. J. Nucl. Mater. 336, 314 (2005).Google Scholar
Xu, C. and Was, G.S.: Low dose proton irradiated creep of FM steel T91. J. Nucl. Mater. 459, 183 (2015).Google Scholar
Campbell, A.A., Campbell, K.B., and Was, G.S.: Proton irradiation-induced creep of ultra-fine grain graphite. Carbon 60, 410 (2013).Google Scholar
Wang, P. and Was, G.S.: Oxidation of Zircaloy-4 during in-situ proton irradiation and corrosion in PWR primary water. J. Mater. Res. DOI: 10.1557/jmr.2014.408.Google Scholar
Allison, C.M.: MATPRO—A Library of Materials Properties for Light-Water-Reactor Accident Analysis, NUREG/CR-6150, EGG-2720, U.S. NRC, Washington, DC, Vol. 4, p. 4-203–4-231.Google Scholar
Was, G.S., Jiao, Z., Beckett, E., Sun, K., Monterrosa, A.M., Maloy, S.A., Anderoglu, O., Sencer, B.H., and Hackett, M.: Emulation of reactor irradiation damage using ion beams. Scr. Mater. 88, 33 (2014).Google Scholar
Sencer, B.H., Kennedy, J.R., Cole, J.I., Maloy, S.A., and Garner, F.A.: Microstructural analysis of an HT9 fuel assembly duct irradiated in FFTF to 155 dpa at 443°C. J. Nucl. Mater. 393, 235 (2009).Google Scholar
Ziegler, J.F., Ziegler, M.D., and Biersak, J.P.: SRIM – The stopping and range of ions in matter (2010). Nucl. Instrum. Methods Phys. Res., Sect. B 268, 1818 (2010).Google Scholar
Stoller, R.E., Toloczko, M.B., Was, G.S., Certain, A.G., Dwaraknath, S., and Garner, F.: On the use of SRIM for computing radiation damage exposure. Nucl. Instrum. Methods Phys. Res., Sect. B 310, 75 (2013).Google Scholar
Was, G.S., Jiao, Z., Van der ven, A., Buremmer, S., and Edwards, D.: Aging and Embrittlement of High Fluence Stainless Steels, Final Report; NEUP Project CFP-09-767; U.S. DOE, Washington, DC, 2012.Google Scholar
Jiao, Z. and Was, G.S.: Precipitate behavior in self-ion irradiated stainless steels at high doses. J. Nucl. Mater. 449, 200 (2014).Google Scholar