Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-24T16:09:53.909Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation and characterization of Sr0.09Ce0.91O1.91, SrCeO3, and Sr2CeO4 by glycine–nitrate combustion: Crucial role of oxidant-to-fuel ratio

Published online by Cambridge University Press:  01 November 2004

S.V. Chavan  and
A.K. Tyagi
S.V. Chavan
Affiliation:
Applied Chemistry Division, Bhabha Atomic Research Centre, Mumbai 400 085, India
A.K. Tyagi*
Affiliation:
Applied Chemistry Division, Bhabha Atomic Research Centre, Mumbai 400 085, India
*
a) Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

The title compositions were prepared by the gel-combustion process using glycine as the fuel and the corresponding metal nitrates as oxidants. The powders after calcination at 600 °C were characterized by x-ray diffraction for phase identification. The lattice parameters were refined by least squares method for each of the title compounds. Sr0.09Ce0.91O1.91 could be prepared in situ, that is, without any further external heating at higher temperatures, whereas phase pure SrCeO3 and Sr2CeO4 could be prepared only after calcination at 950 °C for 3 h. Sr0.09Ce0.91O1.91 was prepared using three different oxidant-to-fuel ratios: the fuel-deficient ratio, the propellant chemistry (stoichiometric) ratio, and the fuel-excess ratio. The crystallite size as calculated by x-ray line broadening was found to be 13 nm, 20 nm, and 42 nm for the products from fuel-deficient, propellant, and fuel-excess ratios, respectively. It was found that the extreme fuel-deficient ratio of 1:0.5 failed to give phase pure Sr0.09Ce0.91O1.91. The transmission electron microscopy studies showed that majority of the particles were in the range 80–100 nm and 200–250 nm for SrCeO3 and Sr2CeO4, respectively. The compositional characterization was done by energy dispersive x-ray. A careful control of the oxidant-to-fuel ratio was found to be necessary to get the desired products, due to their different thermodynamic stabilities. Thus, the versatility of combustion process in synthesizing the products with different thermodynamic stabilities has been shown, which was hitherto unexplored.

Keywords

Transmission electron microscopy (TEM)Combustion synthesisNanoparticle
Type
Articles
Information
Journal of Materials Research , Volume 19 , Issue 11 , November 2004 , pp. 3181 - 3188
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Longo, V., Minichelli, D. and Ricciardiello, F.: Phase equilibrium diagrams for the systems CeO2-CaO, CeO2-SrO, and CeO2-BaO. Sci. Ceram. 11, 171 (1981).Google Scholar
2Chavan, S.V. and Tyagi, A.K.: Sub-solidus phase equilibria in CeO2-SrO system. Thermochim. Acta 390, 79 (2002).CrossRefGoogle Scholar
3Keler, E.K., Godina, N.A. and Kalinina, A.N.: The reaction of cerium dioxide with oxides of the alkaline earth metals. Zh. Neorg. Khim. 1, 2556 (1956).Google Scholar
4Mastromonaco, M.D., Barbariol, I. and Cocco, A.: Solid state reactions of cerium dioxide with alkaline earth metal oxides, electrical conductivity and structure of the phases present in the system. Ann. Chim. 59, 465 (1969).Google Scholar
5Preda, M. and Dinescu, R.: Thermal equilibria in the binary systems MgO-CeO2, CaO-CeO2, SrO-CeO2, BaO-CeO2. Revue Roumaine de Chimie 21, 1023 (1976).Google Scholar
6Naray-szabo, I.: The perovskite-structure family. Muegyetemi Kozlemenyek 1, 30 (1947).Google Scholar
7Smith, A.J. and Walch, A.J.E.: Some mixed metal oxide of perovskite structure. Acta Crystallogr. 13, 653 (1960).CrossRefGoogle Scholar
8Cocco, A.: System cerium oxide-strontium oxide and structure of the phases present. Univ. Studi Trieste, Fac. Ing., Ist. Chim. Appl. No 22, (1966)Google Scholar
9Hoffmann, A. and Physik, Z.: Compound with perovskite structure. Chem. B 28, 65 (1935).Google Scholar
10Solov’eva, A.E. and Gavrish, A.M.: Izv. Akad. Nauk SSSR. Neorg. Mater. 10, 469 (1974).Google Scholar
11Yoshimura, M., Nakamura, T. and Sata, T.: Preparation and lattice distortion of perovskite – type compounds A2+R4+O3 (A = Ba, Sr; R = Ce, Pr, Tb). Chem. Lett. 9, 923 (1973).CrossRefGoogle Scholar
12Pal’guev, S.F. and Volchenkova, Z.S.: Electrical conductivity of solid oxides IV systems CeO2-BeO, CeO2-MgO, CeO2-CaO, CeO2-SrO, CeO2-BaO. Tr. Inst. Elektrokhim. Akad. Nauk SSSR. Ural’sk. Filial. 2, 157 (1961).Google Scholar
13Neuimin, A.D. and Pal’guev, S.F.: Electric conductance and its nature in the systems. CeO2-BeO, CeO2-MgO, CeO2-CaO, CeO2-SrO and CeO2-BaO. Tr. Inst. Elektrokhim. Akad. Nauk SSSR. Ural’sk. Filial. 3, 141 (1962).Google Scholar
14Strekalovskii, V.N., Burov, G.V., Pal’guev, S.F., Volchenkova, Z.S. and Samarina, V.A.: Connection of electric and structural properties in the system CeO2-SrO. Tr. Inst. Elektrokhim. Akad. Nauk SSSR. Ural’sk. Filial. 3, 165 (1962).Google Scholar
15Bonanos, N., Ellis, B. and Mahmood, M.N.: Oxide ion conduction in ytterbium–doped strontium cerate. Solid State Ionics 28–30, 579 (1988).CrossRefGoogle Scholar
16Iwahara, H., Uchinda, H. and Maeda, N.: High temperature fuel and steam electrolysis cells using proton conductive solid electrolytes. J. Power Sources 7, 193 (1982).CrossRefGoogle Scholar
17Iwahara, H., Uchinda, H. and Yamasaki, I.: High temperature steam electrolysis using SrCeO3-based proton conductive solid electrolyte. Int. J. Hydrogen Energy 12, 73 (1987).CrossRefGoogle Scholar
18Jens, R. and Kurt, N.: Crystal structure of the high temperature protonic conductor SrCeO3. J. Mater. Chem. 4, 867 (1994).Google Scholar
19Van Pieterson, L., Soverna, S. and Meijerink, A.: On the nature of the luminescence of Sr2CeO4. J. Electrochem. Soc. 147, 4688 (2000).CrossRefGoogle Scholar
20Mastromonaco, M.D.: Ann. Chim. 59, 465 (1969).Google Scholar
21Kleykamp, H.: The chemical state of the fission products in oxide fuel. J. Nucl. Mater. 131, 221 (1985).CrossRefGoogle Scholar
22Lee, Y.W., Kim, H.S., Kim, S.H., Young, C.Y., Na, S.H., Ledergerber, G., Heimgarbner, P., Pouchon, M. and Burghartz, M.: Preparation of simulated inert matrix fuel with different powders by dry milling method. J. Nucl. Mater. 274, 7 (1999).CrossRefGoogle Scholar
23Ganguly, C.: ThO2 based Fuels for PHWR’s: Fabrication, Characterization and Test Irradiation IInd Int. Conf. CANDU Fuel, Pembroke, Ontaria, Canada, ed. Hasting, I.J., (Canadian Nuclear Society, Ontario, Canada), p. 398 (1989)Google Scholar
24Sankar, R. and Subbarao, G.V.: Eu3+ luminescence, Ce4+→Eu3+ energy transfer, and white-red light generation in Sr2CeO4. J. Electrochem. Soc. 147, 2773 (2000).CrossRefGoogle Scholar
25Sammes, N.M. and Cai, Z.: Ionic conductivity of ceria/yttria stabilized zirconia electrolyte materials. Solid State Ionics 100, 39 (1997).CrossRefGoogle Scholar
26Huang, W., Shuk, P. and Greenblattt, M.: Properties of sol-gel prepared Ce1-xSmxO2-x/2 solid electrolyte. Solid State Ionics 100, 23 (1997).CrossRefGoogle Scholar
27Yoshimura, M. and Suchanek, W.: In situ fabrication of morphology–controlled advanced ceramic materials by soft solution processing. Solid State Ionics 98, 197 (1997).CrossRefGoogle Scholar
28Kingsley, J.J., Suresh, K. and Patil, K.C.: Combustion synthesis of fine–particle metal aluminates. J. Mater. Sci. 25, 1305 (1990).CrossRefGoogle Scholar
29Ferreira, V.M., Azough, F., Baptista, J.L. and Feer, R.: Magnesium titanate microwave dielectric ceramics. Ferroelect. 133, 127 (1992).CrossRefGoogle Scholar
30Kingsley, J.J. and Patil, K.C.: A novel combustion process for the synthesis of fine particle α–alumina and related oxide materials. Mater. Lett. 6, 427 (1988).CrossRefGoogle Scholar
31Bhaduri, S., Bhaduri, S.B. and Zhou, E.: Auto ignition synthesis and consolidation of Al2O3-ZrO2 nano/nano composite powders. J. Mater. Res. 13, 156 (1998).CrossRefGoogle Scholar
32Pederson, L.R., Chick, L.A., and Exarhos, G.J.: Metal oxide ceramic powders and thin films and the manufacturer. U.S. Patent No. 5114702, (May 19, 1992).Google Scholar
33Manoharan, S.S. and Patil, K.C.: Combustion synthesis of metal chromite powders. J. Am. Ceram. Soc. 75, 1012 (1992).CrossRefGoogle Scholar
34Jain, S.R., Adiga, K.C. and Verneker, V.R. Pai: A new approach to thermochemical calculations of condensed fuel-oxidizer mixtures. Combus. Flame 40, 71 (1981).CrossRefGoogle Scholar
35Purohit, R.D. and Tyagi, A.K.: Auto-ignition synthesis of nanocrystalline BaTi4O9 powder. J. Mater. Chem. 12, 312 (2002).CrossRefGoogle Scholar
36Purohit, R.D., Sharma, B.P., Pillai, K.T. and Tyagi, A.K.: Ultrafine ceria powders via glycine-nitrate combustion. Mater. Res. Bull. 36, 2711 (2001).CrossRefGoogle Scholar
37Purohit, R.D., Tyagi, A.K., Mathews, M.D. and Saha, S.: Combustion synthesis and bulk thermal expansion studies of Ba and Sr thorates. J. Nucl. Mater. 280, 51 (2000).CrossRefGoogle Scholar
38Chick, L.A., Pederson, L.R., Maupin, G.D., Bates, J.L., Thomas, L.E. and Exarhos, G.J.: Glycine-nitrate combustion synthesis of oxide ceramic powders. Mater. Lett. 10, 6 (1990).CrossRefGoogle Scholar