Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-24T16:49:50.077Z Has data issue: false hasContentIssue false
  • English
  • Français

Bioactive glass-ceramic scaffolds by additive manufacturing and sinter-crystallization of fine glass powders

Published online by Cambridge University Press:  29 May 2018

Hamada Elsayed Open the ORCID record for Hamada Elsayed [Opens in a new window] ,
Andrea Zocca Open the ORCID record for Andrea Zocca [Opens in a new window] ,
Johanna Schmidt ,
Jens Günster ,
Paolo Colombo  and
Enrico Bernardo
Hamada Elsayed
Affiliation:
Dipartimento di Ingegneria Industriale, University of Padova, Padova 35131, Italy; and Ceramics Department, National Research Centre, Cairo 12622, Egypt
Andrea Zocca
Affiliation:
Division of Ceramic Processing and Biomaterials, BAM Federal Institute for Materials Research and Testing, Berlin 12203, Germany
Johanna Schmidt
Affiliation:
Dipartimento di Ingegneria Industriale, University of Padova, Padova 35131, Italy
Jens Günster
Affiliation:
Division of Ceramic Processing and Biomaterials, BAM Federal Institute for Materials Research and Testing, Berlin 12203, Germany
Paolo Colombo
Affiliation:
Dipartimento di Ingegneria Industriale, University of Padova, Padova 35131, Italy; and Department of Materials Science and Engineering, Pennsylvania State University, University Park, Pennsylvania 16801, USA
Enrico Bernardo*
Affiliation:
Dipartimento di Ingegneria Industriale, University of Padova, Padova 35131, Italy
*
a)Address all correspondence to this author. e-mail: [email protected]
Get access

Abstract

Wollastonite (CaSiO3)–diopside (CaMgSi2O6) glass-ceramic scaffolds have been successfully fabricated using two different additive manufacturing techniques: powder-based 3D printing (3DP) and digital light processing (DLP), coupled with the sinter-crystallization of glass powders with two different compositions. The adopted manufacturing process depended on the balance between viscous flow sintering and crystallization of the glass particles, in turn influenced by the powder size and the sensitivity of CaO–MgO–SiO2 glasses to surface nucleation. 3DP used coarser glass powders and was more appropriate for low temperature firing (800–900 °C), leading to samples with limited crystallization. On the contrary, DLP used finer glass powders, leading to highly crystallized glass-ceramic samples. Despite the differences in manufacturing technology and crystallization, all samples featured very good strength-to-density ratios, which benefit their use for bone tissue engineering applications. The bioactivity of 3D-printed glass-ceramics after immersion in simulated body fluid and the similarities, in terms of ionic releases and hydroxyapatite formation with already validated bioactive glass-ceramics, were preliminarily assessed.

Keywords

scaffoldssintered glass-ceramicswollastonitediopsideadditive manufacturing
Type
Article
Information
Journal of Materials Research , Volume 33 , Issue 14: Focus Issue: 3D Printing of Biomaterials , 27 July 2018 , pp. 1960 - 1971
Copyright
Copyright © Materials Research Society 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

b)

This author was an editor of this journal during the review and decision stage. For the JMR policy on review and publication of manuscripts authored by editors, please refer to http://www.mrs.org/editor-manuscripts/.

References

REFERENCES

Gmeiner, R., Deisinger, U., Schönherr, J., Lechner, B., Detsch, R., Boccaccini, A.R., and Stampfl, J.: Additive manufacturing of bioactive glasses and silicate bioceramics. J. Ceram. Sci. Technol. 6, 75 (2015).Google Scholar
Chopra, K., Mummery, P., Derby, B., and Gough, J.: Gel-cast glass-ceramic tissue scaffolds of controlled architecture produced via stereolithography of moulds. Biofabrication 4, 045002 (2012).CrossRefGoogle ScholarPubMed
Padilla, S., Sánchez-Salcedo, S., and Vallet-Regí, M.: Bioactive glass as precursor of designed-architecture scaffolds for tissue engineering. J. Biomed. Mater. Res., Part A 81, 224 (2007).CrossRefGoogle Scholar
Chu, T-M.G., Halloran, J.W., Hollister, S.J., and Feinberg, S.E.: Hydroxyapatite implants with designed internal architecture. J. Mater. Sci. Mater. Med. 12, 471 (2001).CrossRefGoogle ScholarPubMed
Limpanuphap, S. and Derby, B.: Manufacture of biomaterials by a novel printing process. J. Mater. Sci. Mater. Med. 13, 1163 (2002).CrossRefGoogle ScholarPubMed
Fu, Q., Saiz, E., and Tomsia, A.P.: Bioinspired strong and highly porous glass scaffolds. Adv. Funct. Mater. 22, 1058 (2011).CrossRefGoogle Scholar
Rahaman, M.N., Day, D.E., Bal, B.S., Fu, Q., Jung, S.B., Bonewald, L.F., and Tomsia, A.P.: Bioactive glass in tissue engineering. Acta Biomater. 7, 2355 (2011).CrossRefGoogle ScholarPubMed
Fu, Q., Saiz, E., Rahaman, M.N., and Tomsia, A.P.: Bioactive glass scaffolds for bone tissue engineering: State of the art and future perspectives. Mater. Sci. Eng., C 31, 1245 (2011).CrossRefGoogle ScholarPubMed
Deliormanlı, A.M. and Rahaman, M.N.: Direct-write assembly of silicate and borate bioactive glass scaffolds for bone repair. J. Eur. Ceram. Soc. 32, 3637 (2012).CrossRefGoogle Scholar
Eqtesadi, S., Motealleh, A., Pajares, A., and Miranda, P.: Effect of milling media on processing and performance of 13-93 bioactive glass scaffolds fabricated by robocasting. Ceram. Int. 41, 1379 (2015).CrossRefGoogle Scholar
Hench, L.L. and Kokubo, T.: Properties of bioactive glasses and glass-ceramics. In Handbook of Biomaterial Properties, Black, J. and Hastings, G., eds. (Chapman & Hall, London, 1998); pp. 355–563.CrossRefGoogle Scholar
Tesavibul, P., Felzmann, R., Gruber, S., Liska, R., Thompson, I., Boccaccini, A.R., and Stampfl, J.: Processing of 45S5 Bioglass® by lithography-based additive manufacturing. Mater. Lett. 74, 81 (2012).CrossRefGoogle Scholar
Winkel, A., Meszaros, R., Reinsch, S., Müller, R., Travitzky, N., Fey, T., Greil, P., and Wondraczek, L.: Sintering of 3D-printed glass/HAp composites. J. Am. Ceram. Soc. 95, 3387 (2012).CrossRefGoogle Scholar
Boccaccini, A.R., Chen, Q., Lefebvre, L., Gremillard, L., and Chevalier, J.: Sintering, crystallisation and biodegradation behaviour of Bioglass®-derived glass-ceramics. Faraday Discuss. 136, 27 (2007).CrossRefGoogle Scholar
Baino, F., Ferraris, M., Bretcanu, O., Verné, E., and Vitale-Brovarone, C.: Optimization of composition, structure and mechanical strength of bioactive 3-D glass-ceramic scaffolds for bone substitution. J. Appl. Biomater. 27, 872 (2013).CrossRefGoogle ScholarPubMed
Elsayed, H., Romero, A.R., Ferroni, L., Gardin, C., Zavan, B., and Bernardo, E.: Bioactive glass-ceramic scaffolds from novel ‘inorganic gel casting’ and sinter-crystallization. Materials 10, 171 (2017).CrossRefGoogle ScholarPubMed
Peitl, O., LaTorre, G.P., and Hench, L.L.: Effect of crystallization on apatite-layer formation of bioactive glass 45S5. J. Biomed. Mater. Res. 30, 509 (1996).Google Scholar
Peitl, O., Zanotto, E.D., and Hench, L.L.: Highly bioactive P2O5–Na2O–CaO–SiO2 glass-ceramic. J. Non-Cryst. Solids 292, 115 (2001).CrossRefGoogle Scholar
Meszaros, R., Zhao, R., Travitzky, N., Fey, T., Greil, P., and Wondraczek, L.: Three-dimensional printing of a bioactive glass. Glass Technol.: Eur. J. Glass Sci. Technol., Part A 52, 111 (2011).Google Scholar
Montazerian, M. and Zanotto, E.D.: History and trends of bioactive glass-ceramics. J. Biomed. Mater. Res., Part A 104, 1231 (2016).CrossRefGoogle ScholarPubMed
Müller, R., Zanotto, E.D., and Fokin, V.M.: Surface crystallization of silicate glasses: Nucleation sites and kinetics. J. Non-Cryst. Solids 274, 208 (2000).CrossRefGoogle Scholar
Prado, M.O. and Zanotto, E.D.: Glass sintering with concurrent crystallization. Compt. Rendus Chem. 5, 773 (2002).CrossRefGoogle Scholar
Francis, A.A., Rawlings, R.D., Sweeney, R., and Boccaccini, A.R.: Crystallization kinetic of glass particles prepared from a mixture of coal ash and soda-lime cullet glass. J. Non-Cryst. Solids 333, 187 (2004).CrossRefGoogle Scholar
Hernández-Crespo, M.S., Romero, M., and Rincón, J.M.: Nucleation and crystal growth of glasses produced by a generic plasma arc-process. J. Eur. Ceram. Soc. 26, 1679 (2006).CrossRefGoogle Scholar
Bernardo, E., Scarinci, G., Edme, E., Michon, U., and Planty, N.: Fast-sintered gehlenite glass-ceramics from plasma-vitrified municipal solid waste incinerator fly ashes. J. Am. Ceram. Soc. 92, 528 (2009).CrossRefGoogle Scholar
Ray, A. and Tiwari, A.N.: Compaction and sintering behaviour of glass-alumina composites. Mater. Chem. Phys. 67, 220 (2001).CrossRefGoogle Scholar
Hulbert, S.F., Morrison, S.J., and Klawitter, J.J.: Tissue reaction to three ceramics of porous and non-porous structures. J. Biomed. Mater. Res. 6, 347 (1972).CrossRefGoogle ScholarPubMed
Sainz, M.A., Pena, P., Serena, S., and Caballero, A.: Influence of design on bioactivity of novel CaSiO3–CaMg(SiO3)2 bioceramics: In vitro simulated body fluid test and thermodynamic simulation. Acta Biomater. 6, 2797 (2010).CrossRefGoogle ScholarPubMed
Börger, A., Supancic, P., and Danzer, R.: The ball on three balls test for strength testing of brittle discs: Stress distribution in the disc. J. Eur. Ceram. Soc. 22, 142 (2002).CrossRefGoogle Scholar
Elsayed, H., Colombo, P., and Bernardo, E.: Direct ink writing of wollastonite-diopside glass-ceramic scaffolds from a silicone resin and engineered fillers. J. Eur. Ceram. Soc. 37, 4187 (2017).CrossRefGoogle Scholar
Karamanov, A. and Pelino, M.: Induced crystallization porosity and properties of sintered diopside and wollastonite glass-ceramics. J. Eur. Ceram. Soc. 28, 555 (2008).CrossRefGoogle Scholar
Boccaccini, A.R.: On the viscosity of glass composites containing rigid inclusions. Mater. Lett. 34, 285 (1998).CrossRefGoogle Scholar
Müller, R., Eberstein, M., Reinsch, S., Schiller, W.A., Deubener, J., and Thiel, A.: Effect of rigid inclusions on sintering of low temperature co-fired ceramics. Phys. Chem. Glasses: Eur. J. Glass Sci. Technol., Part B 48, 259 (2007).Google Scholar
Prado, M.O., Ferreira, E.B., and Zanotto, E.D.: Sintering kinetics of crystallizing glass particles. Ceram. Trans. 170, 163 (2005).Google Scholar
Reddy, A.A., Tulyaganov, D.U., Pascual, M.J., Kharton, V.V., Tsipis, E.V., Kolotygin, V.A., and Ferreira, J.M.F.: SrO-containing diopside glass-ceramic sealants for solid oxide fuel cells: Mechanical reliability and thermal shock resistance. Fuel Cells 13, 689 (2013).Google Scholar
Thompson, I.D. and Hench, L.L.: Mechanical properties of bioactive glasses, glass-ceramics and composites. Proc. Inst. Mech. Eng., Part H 212, 127 (1998).CrossRefGoogle ScholarPubMed
Rahaman, M.N., Liu, X., and Huang, T.S.: Bioactive glass scaffolds for the repair of load-bearing bones. In Advances in Bioceramics and Porous Ceramics, Vol. 32, Narayan, R. and Colombo, P., eds. (John Wiley & Sons, Hoboken, New Jersey, United States, 2009); p. 65.Google Scholar
Gibson, L.J. and Ashby, M.F.: Cellular Solids, Structure and Properties, 2nd ed. (Cambridge University Press, Cambridge, U.K., 1999).Google Scholar
Nakamura, T., Yamamuro, T., Higashi, S., Kokubo, T., and Itoo, S.: A new glass-ceramic for bone replacement: Evaluation of its bonding to bone tissue. J. Biomed. Mater. Res. 19, 685 (1985).CrossRefGoogle ScholarPubMed
Kokubo, T.: Bioceramics and Their Clinical Applications (Elsevier, New York City, New York, United States, 2008).Google Scholar
Lu, J.X., Descamps, M., Dejou, J., Koubi, G., Hardouin, P., Lemaitre, J., and Proust, J.P.: The biodegradation mechanism of calcium phosphate biomaterials in bone. J. Biomed. Mater. Res. 63, 408 (2002).CrossRefGoogle ScholarPubMed
Ohtsuki, C., Kokubo, T., and Yamamuro, T.: Mechanism of apatite formation on CaOSiO2P2O5 glasses in a simulated body fluid. J. Non-Cryst. Solids 143, 84 (1992).CrossRefGoogle Scholar
Wu, C. and Chang, J.: A review of bioactive silicate ceramics. Biomed. Mater. 8, 032001 (2013).CrossRefGoogle ScholarPubMed
Siriphannon, P., Kameshima, Y., Yasumori, A., Okada, K., and Hayashi, S.: Formation of hydroxyapatite on CaSiO3 powders in simulated body fluid. J. Eur. Ceram. Soc. 22, 511 (2002).CrossRefGoogle Scholar
Iimori, Y., Kameshima, Y., Okada, K., and Hayashi, S.: Comparative study of apatite formation on CaSiO3 ceramics in simulated body fluids with different carbonate concentrations. J. Mater. Sci.: Mater. Med. 16, 73 (2005).Google ScholarPubMed
Salahinejad, E. and Vahedifard, R.: Deposition of nanodiopside coatings on metallic biomaterials to stimulate apatite-forming ability. Mater. Des. 123, 120 (2017).CrossRefGoogle Scholar