Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by Crossref.
Vaseleski, R. C.
and
Metzner, A. B.
1974.
Drag reduction in the turbulent flow of fiber suspensions.
AIChE Journal,
Vol. 20,
Issue. 2,
p.
301.
Fisher, Robert J.
and
Denn, Morton M.
1975.
Finite-amplitude stability and draw resonance in isothermal melt spinning.
Chemical Engineering Science,
Vol. 30,
Issue. 9,
p.
1129.
Denn, Morton M.
Petrie, Christopher J. S.
and
Avenas, Pierre
1975.
Mechanics of steady spinning of a viscoelastic liquid.
AIChE Journal,
Vol. 21,
Issue. 4,
p.
791.
Petrie, C. J. S.
1975.
A re-interpretation of the spinnability predictions of Chang and Lodge.
Rheologica Acta,
Vol. 14,
Issue. 10,
p.
955.
Mewis, J.
and
Spaull, A.J.B.
1976.
Rheology of concentrated dispersions.
Advances in Colloid and Interface Science,
Vol. 6,
Issue. 3,
p.
173.
Goddard, J.D.
1976.
Tensile stress contribution of flow-oriented slender particles in non-newtonian fluids.
Journal of Non-Newtonian Fluid Mechanics,
Vol. 1,
Issue. 1,
p.
1.
Goddard, J. D.
1976.
The stress field of slender particles oriented by a non-Newtonian extensional flow.
Journal of Fluid Mechanics,
Vol. 78,
Issue. 1,
p.
177.
Jeffrey, D. J.
and
Acrivos, Andreas
1976.
The rheological properties of suspensions of rigid particles.
AIChE Journal,
Vol. 22,
Issue. 3,
p.
417.
Kale, D. D.
and
Metzner, A. B.
1976.
Turbulent drag reduction in dilute fiber suspensions: Mechanistic considerations.
AIChE Journal,
Vol. 22,
Issue. 4,
p.
669.
Arp, P.A
and
Mason, S.G
1977.
The kinetics of flowing dispersions.
Journal of Colloid and Interface Science,
Vol. 61,
Issue. 1,
p.
21.
Filipsson, Lars G.R.
Torgny Lagerstedt, J.H.
and
Bark, Fritz H.
1977.
A note on the analogous behaviour of turbulent jets of dilute polymer solutions and fibre suspensions.
Journal of Non-Newtonian Fluid Mechanics,
Vol. 3,
Issue. 1,
p.
97.
Bark, Fritz H.
and
Tinoco, Hernán
1978.
Stability of plane Poiseuille flow of a dilute suspension of slender fibres.
Journal of Fluid Mechanics,
Vol. 87,
Issue. 2,
p.
321.
Chan, Yu
White, James L.
and
Oyanagi, Yasushi
1978.
Influence of glass fibers on the extrusion and injection molding characteristics of polyethylene and polystyrene melts.
Polymer Engineering & Science,
Vol. 18,
Issue. 4,
p.
268.
Metz, B.
Kossen, N. W. F.
and
Suijdam, J. C.
1979.
Advances in Biochemical Engineering, Volume 11.
Vol. 11,
Issue. ,
p.
103.
Goddard, J. D.
1979.
A slender‐body theory for interfacial failure in unidirectional fiber‐reinforced composites.
Polymer Engineering & Science,
Vol. 19,
Issue. 2,
p.
125.
Czarnecki, Lech
and
White, James L.
1980.
Shear flow rheological properties, fiber damage, and mastication characteristics of aramid‐, glass‐, and cellulose‐fiber‐reinforced polystyrene melts.
Journal of Applied Polymer Science,
Vol. 25,
Issue. 6,
p.
1217.
1980.
Viscous Flow Drag Reduction.
p.
327.
Crowson, R. J.
Folkes, M. J.
and
Bright, P. F.
1980.
Rheology of short glass fiber‐reinforced thermoplastics and its application to injection molding I. Fiber motion and viscosity measurement.
Polymer Engineering & Science,
Vol. 20,
Issue. 14,
p.
925.
Knutsson, B. Anders
White, James L.
and
Abbas, Kent B.
1981.
Rheological and extrusion characteristics of glass fiber‐reinforced polycarbonate.
Journal of Applied Polymer Science,
Vol. 26,
Issue. 7,
p.
2347.
Kitano, T.
and
Kataoka, T.
1981.
The rheology of suspensions of vinylon fibers in polymer liquids. I. Suspensions in silicone oil.
Rheologica Acta,
Vol. 20,
Issue. 4,
p.
390.