Hostname: page-component-cd9895bd7-dzt6s Total loading time: 0 Render date: 2024-12-18T20:51:54.688Z Has data issue: false hasContentIssue false
  • English
  • Français

An investigation of shock/boundary-layer interactions on curved surfaces at transonic speeds

Published online by Cambridge University Press:  21 April 2006

X. Liu  and
L. C. Squire
X. Liu
Affiliation:
Cambridge University Engineering Department, Trumpington Street, Cambridge CB2 1PZ, UK
L. C. Squire
Affiliation:
Cambridge University Engineering Department, Trumpington Street, Cambridge CB2 1PZ, UK
Get access Rights & Permissions [Opens in a new window]

Abstract

A detailed experimental investigation has been made of shock/boundary-layer interactions on curved surfaces at transonic speeds. The shock waves were generated above circular-arc models with different radii mounted on the floor of the wind-tunnel test section. The ratio of the boundary-layer thickness (U/Ue = 0.99) in front of the shock to the radius of the surface curvature ranged from 0 (i.e. a flat surface) to 0.068. The Mach number just in front of the shock varied from 1.00 to 1.82 and the Reynolds number based on the model chord length was about 1.6 million. Interacting-flow studies include flows with shock-induced separation, flows with trailing-edge separation and flows with no separation. From all these studies it was found that separation was most extensive at the critical peak Mach number at which the separation changes from trailing-edge separation to shock-induced separation.

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 187 , February 1988 , pp. 467 - 486
Copyright
© 1988 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Ackeret, J., Feldmann, F. & Rott, N. 1947 Investigation of compression shocks and boundary layers in gases moving at high speed. NACA TM-1113.
Baker, C. J. 1980 The prediction of boundary layer development through a normal shock wave turbulent boundary layer interaction. CUED/A-AERO/TR 10 (1980).
Brusseleers, M. 1980 Physical and numerical aspects of shock boundary layer interaction. V.K.I. L.S. 1980–8.
Bryanston-Cross, P. J. & Denton, J. D. 1982 Comparison of interferometric measurements and computed flow around a wedge profile in the transonic region. ASME paper 82-GT-258.
Denton, J. D. 1983 An improved time-marching method for turbomachinery flow calculation. Trans. ASME A: J. Engng for Power 105, 514.Google Scholar
Green, J. E. 1970 Interactions between shock waves and turbulent boundary layers. Prog. Aerospace Sci. 11, 235.Google Scholar
Green, J. E., Weeks, D. J. & Brooman, J. W. F. 1972 Prediction of turbulent boundary layers and wakes in compressible flow by a lag-entrainment method. RAE TR 72231.
Korkegi, R. H. 1971 Survey of viscous interactions associated with high Mach number flight. AIAA J. 9, 771.Google Scholar
Vest, C. M. 1979 Holographic Interferometry. Wiley.