Hostname: page-component-cd9895bd7-mkpzs Total loading time: 0 Render date: 2024-12-28T04:45:08.406Z Has data issue: false hasContentIssue false

Meta-waveguide analysis and implementation for using as a slot array antenna

Published online by Cambridge University Press:  11 September 2019

Mahmoud Fallah*
Affiliation:
School of Electrical Engineering, Iran University Science and Technology, Tehran, Iran
Mohammad Khalaj-Amirhosseini
Affiliation:
School of Electrical Engineering, Iran University Science and Technology, Tehran, Iran
*
Author for correspondence: Mahmoud Fallah, E-mail: [email protected]

Abstract

This paper presents a novel concept named meta-waveguide structures to design slot array antennas based on metasurface. The proposed method investigates the geometrical parameters of the embedded metasurface and their relations to build up the engineered electric and magnetic fields to introduce efficient slot array antennas. This approach eliminates the necessity of using the well-known offsets in typical slot arrays, which can be benefited from linear array theorem. This idea is realized by employing successive filed curvature along the propagation direction, utilizing periodic metasurfaces. Thereafter, a step-by-step algorithm is recommended to design an efficient slot array antenna. Finally, a prototype is fabricated and tested experimentally validating the theoretical calculations.

Type
Research Papers
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Caloz, C and Itoh, T (2005) Electromagnetic Metamaterials: Transmission Line Theory and Microwave Applications. Hoboken, New Jersey: John Wiley & Sons.Google Scholar
2.Marqués, R, Martin, F and Sorolla, M (2011) Metamaterials with Negative Parameters: Theory, Design, and Microwave Applications. Hoboken, New Jersey: John Wiley & Sons.Google Scholar
3.Li, M, Yang, H-L, Hou, X-W, Tian, Y and Hou, D-Y (2010) Perfect metamaterial absorber with dual bands. Progress in Electromagnetics Research 108, 3749.Google Scholar
4.Bhattacharyya, S and Srivastava, KV (2014) Triple band polarization-independent ultra-thin metamaterial absorber using ELC resonator. Journal of Applied Physics 115, 064508.Google Scholar
5.Li, H, Hua-Yuan, L, Zhou, B, Shen, XP, Cheng, Q and Cui, TJ (2011) Ultrathin multiband gigahertz metamaterial absorbers. Journal of Applied Physics 110, 014909.Google Scholar
6.Shen, X, Cui, TJ, Zhao, J, Ma, HF, Jiang, WX and Li, H (2011) Polarization-independent wide-angle triple-band metamaterial absorber. Optics Express 19, 94019407.Google Scholar
7.Bhattacharyya, S, Ghosh, S and Srivastava, KV (2013) Triple band polarization-independent metamaterial absorber with bandwidth enhancement at X-band. Journal of Applied Physics 114, 094514.Google Scholar
8.Park, JW, Tuong, PV, Rhee, JY, Kim, KW, Jang, WH, Choi, EH, Chen, LY and Lee, Y (2013) Multi-band metamaterial absorber based on the arrangement of donut-type resonators. Optics Express 21, 96919702.Google Scholar
9.Fallah, M and Vadjed-Samiei, MH (2014) Designing a bandpass frequency selective surface based on an analytical approach using hexagonal patch-strip unit cell. Electromagnetics 35, 2529.Google Scholar
10.Zanganeh, E, Fallah, M, Abdolali, A and Komjani, N (2016) New approach to design dual-band frequency selective surface based on frequency response tunning of each individual layer. Microwave and Optical Technology Letters 58, 782788.Google Scholar
11.Rajabalipanah, H, Fallah, M and Abdolali, A (2018) A fast, straightforward, and accurate computer-aided design for highly efficient metasurface-assisted Fabry-Perot cavity antennas based on the equivalent circuit approach. International Journal of Electronics and Communications (AEÜ) 97, 252262.Google Scholar
12.Nasrollahi, H, Fallah, M, Nazeri, AH and Abdolali, A (2018) Novel algorithm for designing reflect-array antennas based on analytical methods. International Journal of Electronics and Communications (AEÜ) 97, 280289.Google Scholar
13.Bhattacharyya, S, Ghosh, S and Srivastava, KV (2017) A wideband cross polarization conversion using metasurface. Radio Science 52, 13951404.Google Scholar
14.Yin, JY, Wan, Y, Zhang, Q and Cui, TJ (2015) Ultra wideband polarization-sensitive conversions of electromagnetic waves by metasurface under large range incident angles. Scientific Reports 5, 12476.Google Scholar
15.Khan, MI, Fraz, Q and Tahir, FA (2017) Ultra-wideband cross polarization conversion metasurface insensitive to incident angle. Journal of Applied Physics 121, 045103.Google Scholar
16.Chen, H, Wang, J, Ma, H, Qu, S, Xu, Z, Zhang, A, Yan, M and Li, Y (2014) Ultra-wideband polarization conversion metasurfaces based on multiple plasmon resonances. Journal of Applied Physics 115, 154504.Google Scholar
17.Wei, Z, Cao, Y, Fan, Y, Yu, X and Li, H (2011) Broadband polarization transformation via enhanced asymmetric transmission through arrays of twisted complementary split-ring resonators. Applied Physics Letters 99, 221907.Google Scholar
18.Maleknejad, K, Abdolali, A and Fallah, M (2014) Calculation of electromagnetic waves scattering by non-homogeneous surface impedance using moment method. Journal of Communications Technology and Electronics 59, 11281134.Google Scholar
19.Gok, G and Grbic, A (2013) A printed beam-shifting slab designed using tensor transmission-line metamaterials. IEEE Transactions on Antennas and Propagation 61, 728734.Google Scholar
20.Fallah, M and Khalaj-Amirhosseini, M (2019) The modeling of metawaveguide for using as a slot antenna array. International Journal of Electronics and Communications (AEÜ) 109, 6775.Google Scholar
21.Elliott, RS (2003) Antenna Theory & Design. Wiley-IEEE Press, Hoboken, New Jersey: John Wiley & Sons.Google Scholar