Hostname: page-component-cd9895bd7-lnqnp Total loading time: 0 Render date: 2024-12-28T21:04:42.288Z Has data issue: false hasContentIssue false
  • English
  • Français

Dual-band-notched antenna for UWB MIMO applications

Published online by Cambridge University Press:  22 October 2015

Zamir Wani  and
Dinesh Kumar
Zamir Wani*
Affiliation:
Indian Institute of Information Technology, Design and Manufacturing, Jabalpur, Madhya Pradesh 482005, India. Phone: +918989821124
Dinesh Kumar
Affiliation:
Indian Institute of Information Technology, Design and Manufacturing, Jabalpur, Madhya Pradesh 482005, India. Phone: +918989821124
*
Corresponding author: Z. Wani Email: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

In this report, a compact antenna system with dual-band-notched characteristics is proposed for ultra-wideband (UWB) multiple-input multiple-output (MIMO) applications. Two antenna elements are placed side by side and fed with matched microstrip lines on a substrate with an area of 35 × 30 mm2. Notched characteristics at WiMAX (3.4–3.6 GHz) and WLAN (5.725–5.825 GHz) have been achieved using complementary split ring resonator (SRR) slots etched in both the antenna elements. Electromagnetic isolation between the two elements close to each other is achieved using a ground T-stub and slots etched in the ground plane. Antenna system has been tested and measured results are close to the desired ones. Measured isolation >20 dB is obtained in most of the UWB bands. The proposed antenna system meets the requirements well for MIMO applications.

Keywords

Envelope correlation coefficientDiversityIsolationMIMO
Type
Research Papers
Information
International Journal of Microwave and Wireless Technologies , Volume 9 , Issue 2 , March 2017 , pp. 381 - 386
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]“Federal communications commission revision of Part 15 of the Commission's rules regarding ultra-wideband transmission system from 3.1 to 10.6 GHz,” ET-Docket, 2002, pp. 98–153. Federal Communications Commission, Washington, DC.Google Scholar
[2] Foschini, G.J.; Gans, M.J.: On limits of wireless communications in a fading environment when using multiple antennas. Wireless Pers. Commun., 6 (1998), 311–335.CrossRefGoogle Scholar
[3] Sung, Y.: Triple band-notched UWB planar monopole antenna using a modified H-shaped resonator. IEEE Trans. Antennas Propag., 61 (2) (2013), 953–957.CrossRefGoogle Scholar
[4] Zhang, S.; Ying, Z.; Xiong, J.; He, S.: Ultrawideband MIMO/diversity antennas with a tree-like structure to enhance wideband isolation. IEEE Antennas Wireless Propag. Lett., 8 (2009), 1279–1282.Google Scholar
[5] Gogosh, N.; FarhanShafique, M.; Saleem, R.; Usman, I.; Faiz, A.M.: An UWB diversity antenna array with a novel h-type decoupling structure. Microw. Opt. Technol. Lett., 55 (2013), 2715–2720.CrossRefGoogle Scholar
[6] Gallo, M.; Daviu, E.A.; Bataller, M.F.; Bozzetti, M.; Pardo, J.M.; Llacer, L.J.: A broadband pattern diversity annular slot antenna. IEEE Trans. Antennas Propag., 60 (3) (2012), pp. 1596–1600.CrossRefGoogle Scholar
[7] Li, J.F.; Chu, Q.X.; Huang, T.G.: A compact wideband MIMO antenna with two novel bent slits. IEEE Trans. Antennas Propag., 60 (2) (2012), 482–489.Google Scholar
[8] Gao, P.; He, S.; Wei, X.; Xu, Z.; Wang, N.; Zheng, Y.: Compact printed UWB diversity slot antenna with 5.5-GHz band-notched characteristics. IEEE Antennas Wireless Propag. Lett., 13 (2014), 376–379.CrossRefGoogle Scholar
[9] Hallbjörner, P.: The significance of radiation efficiencies when using S-parameters to calculate the received signal correlation from two antennas. IEEE Antennas Wireless Propag., 4 (2005), 97–99.Google Scholar
[10] Chen, Z.N.; Yang, N.; Guo, Y.X.; Chia, M.Y.W.: An investigation into measurement of handset antennas. IEEE Trans. Instrum. Meas., 54 (3) (2005), 1100–1110.Google Scholar
[11] Liu, X.-L.; Wang, Z.-D.; Yin, Y.-Z.; Ren, J.; Wu, J.-J.: A compact ultrawideband MIMO antenna using QSCA for high isolation. IEEE Antennas Wireless Propag., 13 (2) (2014), 1497–1500.Google Scholar
[12] Daviu, E.A.; Gallo, M.; Clemente, B.B.; Bataller, M.F.: Ultrawideband slot ring antenna for diversity applications. Electron. Lett., 46 (7) (2010), 478–480.Google Scholar
[13] Liu, L.; Cheung, S.W.; Yuk, T.I.: Compact MIMO antenna for portable devices in UWB applications. IEEE Trans. Antennas Propag., 61 (8) (2013), 4257–4264.Google Scholar
[14] Lee, J.-M.; Kim, K.-B.; Ryu, H.-K.; Woo, J.-M.: A compact ultrawideband MIMO antenna with WLAN band-rejected operation for mobile devices. IEEE Antennas Wireless Propag. Lett., 11 (2012), 990–993.Google Scholar
[15] He, H. et al. : Compact polarization diversity ultrawideband MIMO antenna with triple band-notched characteristics. Microw. Opt. Technol. Lett. 57 (4) (2015), 946–953.Google Scholar
[16] Tang, T.-C.; Lin, K.-H.: An ultrawideband MIMO antenna with dual band-notched function. IEEE Antennas Wireless Propag. Lett., 13 (2014), 1076–1079.CrossRefGoogle Scholar
[17] Gao, P.; He, S.; Wei, X.; Xu, Z.; Wang, N.; Zheng, Y.: Compact printed UWB diversity slot antenna with 5.5-GHz band-notched characteristics. IEEE Antennas Wireless Propag. Lett., 13 (2014), 376–379.CrossRefGoogle Scholar
[18] Kerkhoff, A.; Ling, H.: Design of a planar monopole antenna for use with ultrawideband (UWB) having a band-notched characteristic, in IEEE Int. Symp. on Antennas and Propagation, Columbus, OH, vol. I, 2003, 830–833.Google Scholar