This study provides 39 new thermochronometric analyses from the western part of the Greater Caucasus, a region in which existing data are extremely limited and of questionable quality. The new results are consistent with field studies that identify Triassic to Middle Jurassic (Cimmerian) and Oligo-Miocene (Alpine) orogenic erosional events. An inverse relationship between the fission track and depositional ages of Oligo-Miocene sedimentary samples also implies some degree of Eocene erosion of the Greater Caucasus and intermediate sediment storage. Cooling ages and field relationships within the core of the range, west of Mt Elbrus, require ~5 km of Permo-Triassic exhumation and restrict the overall amount of Cenozoic exhumation to ~2.5 km. Current exhumation rates are typically low, and do not support a Plio-Pleistocene increase in climate-driven denudation. High (~1 km Ma−1) rates of exhumation are restricted to the southern flank of the range in northwest Georgia. Despite a general lack of significant seismicity within the study region, this exhumation peak is close to the largest instrumentally recorded earthquake in the Caucasus (Ms = 7.0). This may suggest that exhumation is associated with the decoupling of the sedimentary succession from its crystalline basement in the southern part of the range and the inversion of the largely Jurassic fill of the Greater Caucasus basin. Rates of exhumation are compatible with this being driven by active shortening. Further sampling and analysis are required to provide a higher-resolution, low-temperature thermochronology of Alpine exhumation, to isolate the drivers for Palaeogene Dziruli Massif cooling and uplift, and to constrain better the extent of the current, localized phase of rapid exhumation.

The morphology and structure of the 1999 lava flows at Mount Cameroon volcano are documented and discussed in relation to local and source dynamics. Structures are analysed qualitatively and more detailed arguments are developed on the processes of levee formation and systematic links between flow dynamics and levee–channel interface geometry. The flows have clear channels bordered by four main types of levees: initial, accretionary, rubble and overflow levees. Thermally immature pahoehoe lava units with overflow drapes define the proximal zone, whereas rubble and accretionary levees are common in the distal region bordering thermally mature aa clinker or blocky aa flow channels. Pressure ridges, squeeze-ups and pahoehoe ropes are the prevalent compressive structures. Standlines displayed on clinkery breccias are interpreted to represent levee–channel interactions in response to changing flow levels. These data complement previous knowledge on lava flow morphology, thus far dominated by Etnean and Hawaiian examples.

Tectonothermal analysis of a mainly carbonate unit located in the external part of the Variscan orogen in NW Spain is dealt with using the conodont colour alteration index (CAI) and the study of textures of these microfossils. The Kübler index of the illite (KI) is used as a complementary method. The area is characterized by a great uniformity in the CAI values, which in most cases are <2, indicating diagenetic conditions. In spite of the low CAI values, textures show great variety and were mainly originated by diagenetic processes of apatite dissolution and precipitation. The conodonts underwent a long period of heating (probably from the Pennsylvanian to the Cenozoic) to low temperatures (<100°C) to reach the low CAI values measured. Assuming a normal geothermal gradient, these temperatures required an overburden <3 km that in part was due to burial and in part to tectonic superimposition. Minor local anomalies in the CAI values and some textural alterations, related to dissolution and precipitation of authigenic minerals, could be due to epithermal activity that gave rise to various ore deposits in the studied area mainly during Permian times.

Late Carboniferous red-beds, < 700 m thick, at outcrop and in the subsurface of the Canonbie Coalfield can be assigned to the Warwickshire Group. They are preserved within the axial part of the Solway Syncline and are divisible into the Eskbank Wood, Canonbie Bridge Sandstone and Becklees Sandstone formations. Sedimentation largely took place on a well-drained alluvial plain, characterized mainly by early, primary oxidation of the strata. Large, northerly-flowing braided river systems were common, with overbank and floodplain fines deposited lateral to the channels; soils formed during intervals of low sediment aggradation. The Canonbie succession includes some of the youngest Carboniferous rocks preserved in the UK. Correlation of the Eskbank Wood Formation is equivocal, but using petrographical, heavy mineral, zircon age dating and palaeocurrent data, the Canonbie Bridge Sandstone Formation can be unambiguously correlated with the Halesowen Formation of Warwickshire, the Pennant Sandstone Formation of South Wales and the offshore Boulton Formation. This suggests that southerly-derived detritus travelled considerable distances from the Variscan highlands of Brittany and/or central Germany across the southern North Sea and UK areas, to a position some hundreds of kilometres north of that previously recognized. The Becklees Sandstone Formation has much in common with the Salop Formation of the English Midlands. It appears to have no preserved equivalent elsewhere in the UK or in the UK sector of the southern North Sea but resembles stratigraphically higher parts of the southern North Sea succession seen in the Dutch sector.

Limestone megaclasts up to hundreds of metres in size are present within the Gwna Group mélange, North Wales, UK. The mélange has been interpreted as part of a Peri-Gondwanan fore-arc accretionary complex although the age of deposition remains contentious, proposals ranging from Neoproterozoic to Early Ordovician. This paper uses strontium isotope chemostratigraphy to establish the age of the limestone blocks and thus provide a maximum age constraint on mélange formation. Results show that, although the carbonates are locally dolomitized, primary 87Sr/86Sr ratios can be identified and indicate deposition sometime between the late Tonian and earliest Cryogenian. This age is older than that suggested by stromatolites within the limestone and indicates that the limestone did not form as cap carbonate deposits.

The Mt Cer Pluton, Serbia, is a complex laccolith-like intrusion (~ 60 km2), situated along the junction between the southern Pannonian Basin and northern Dinarides. It intrudes Palaeozoic metamorphic rocks causing weak to strong thermal effects. Based on modal and chemical compositions, four rock-types can be distinguished: (1) metaluminous I-type quartz monzonite/quartz monzodiorite (QMZD); (2) peraluminous S-type two-mica granite (TMG), which intrudes QMZD; (3) Stražanica granodiorite/quartz monzonite (GDS); and (4) isolated mafic enclaves (ME), found only in QMZD. 40K–39Ar dating and geological constraints indicate that the main quartz monzonite/quartz monzodiorite body of Mt Cer was emplaced not later than 21 Ma, whereas the emplacement ages of the Stražanica granodiorite/quartz monzonite and two-mica granites are estimated at around 18 and 16 Ma, respectively. The Mt Cer pluton is similar to the Mt Bukulja pluton, some 80 km southwestwards. Genesis of QMZD cannot be interpreted by fractional crystallization coupled with mixing or assimilation. It is best explained by a convection–diffusion process between mantle-derived minette/leucominette magmas and GDS-like magmas followed by two end-member magma mixing. The composition of GDS rocks suggests that GDS-like magmas could have formed by melting of lower crustal lithologies similar to amphibolite/metabasalts. The geochemistry of TMG is reproduced by an Assimilation/Fractional Crystallization model with a ratio of rate of assimilation to rate of fractional crystallization of 0.4, using the compositions of the least evolved TMG of the Bukulja pluton and adjacent metamorphic rocks as proxies for the parental magma and contaminant, respectively. The origin and evolution of the Mt Cer and adjacent Mt Bukulja plutons provide new constraints on the Tertiary geodynamics of the northern Dinarides–southern Pannonian region. The quartz monzonite/quartz monzodiorite is interpreted as a result of the Oligocene post-collisional Dinaride orogen-collapse, which included a limited lithosphere delamination, small-scale mantle upwelling, and melting of the lower crust. By contrast, the two-mica granite magmas formed through melting in shallower crustal levels during the extensional collapse in the Pannonian area.

The Karimnagar granulite terrane is an integral part of the Eastern Dharwar Craton (EDC), India, having been the subject of much interest because of the only reported granulite facies rocks in the EDC. It shows a large variety of rock types with a wide range of mineral parageneses and chemical compositions, namely charnockites (Opx+Pl+perthite+Qtz±Bt±Grt), gneisses (Opx+Crd+Bt+Pl+Qtz+perthite±Sil±Grt±Spl; Bt+Qtz+Pl±Crd±Hbl±Spl), mafic granulites (Cpx+Pl+Qtz±Opx±Hbl), quartz-free granulites (Spr+Spl+Bt+Crd+Kfs+Crn; Bt+Crd+Kfs±Crn±Spl±Krn; And+Bt+Kfs+Chl), granites (Qtz+Pl+Kfs±Bt±Hbl), altered ultramafic rocks (Chl+Trem+Tlc), metadolerites (Cpx+Pl±Bt±Qtz±Chl), banded magnetite quartzites and quartzites. Andalusite- and chlorite-bearing assemblages presumably suggest a retrograde origin. Investigation of quartz-free granulites of the area brings out some interesting and important observations, reflecting the presence of refractory phases. These granulites are devoid of sillimanite and contain corundum instead. Reaction textures in the gneisses include breakdown of garnet to form coronas and symplectites of orthopyroxene+cordierite, formation of cordierite from garnet+sillimanite+quartz and late retrograde biotite and biotite+quartz symplectites. In the mafic granulites, inclusions of quartz and hornblende within orthopyroxene are interpreted as being a part of the prograde assemblage. At a later stage orthopyroxene is also rimmed by hornblende. The quartz-free granulites display a variety of spectacular coronas, for example, successive rims on corundum consisting of spinel+sapphirine+cordierite±orthopyroxene, rare skeletal symplectitic intergrowth of sapphirine+cordierite+potash feldspar, and late retrograde formation of chlorite, corundum, spinel and andalusite from sapphirine±cordierite. Based on chemographic relationships and petrogenetic grids, a sequence of prograde, isothermal decompressive and retrograde reactions have been inferred. Quartz-free sapphirine granulites and mafic granulites record the highest P–T conditions (~7 kbar, 850°C), whereas the gneisses were formed at lower P–T conditions (~5 kbar, 800°C). In addition, the presence of andalusite-bearing rocks suggests a pressure of around 2.5 kbar. This change in pressure from 7 kbar to around 2.5 kbar suggests a decompressive path for the evolution of granulites in the study area, which indicates an uplift for the granulite-facies rocks from lower crustal conditions. The implications for supercontinent history are also addressed in light of available geochronological data.

Carbon- and oxygen-isotope ratios are commonly used to correlate shallow- and deep-marine successions. Carbon- and oxygen-isotope analyses were performed on bulk-carbonate samples from two Kimmeridgian sections of the Swiss Jura platform in order to correlate them with biostratigraphically well-dated coeval sections in the adjacent basin. On the platform, a general decrease in δ13C and δ18O values from the base to the top of the studied interval is measured, whereas time-equivalent pelagic–hemipelagic carbonates record an increase in carbon- and oxygen-isotope ratios. Moreover, the measured δ13C and δ18O values are generally lower than those indicated for the Kimmeridgian open ocean and show high-frequency variations superimposed on the general trend. Samples were screened for diagenetic alteration using optical and cathodoluminescence petrography and coupled carbon- and oxygen-isotope and trace-element analyses. Some observations favour a role for diagenetic alteration, but isotopic and elemental trends as well as sedimentological evidence suggest that the more negative values of δ13C and δ18O relative to Kimmeridgian seawater are also due to local environmental conditions. High-frequency changes in δ18O and δ13C values most likely result from variations in salinity and carbonate production and accumulation rates. These variations were produced by different water masses that were isolated from the open ocean and developed their own geochemical signatures. Repeated isolation was induced by high-frequency sea-level fluctuations and helped by irregular platform morphology. Consequently, carbon- and oxygen-isotope records in shallow-marine carbonates can be used for stratigraphic correlation only if their origin is well known.

The Carboniferous Billefjorden rift basin is a well-known example of a suite of Carboniferous basins on the Barents Shelf and NE Greenland. The basin has a clastic, carbonate and evaporite fill with complex and disputed stratigraphic relationships, especially regarding the Ebbadalen and Minkinfjellet formations. Geometrically, the basin is considered a simple half-graben. A N–S-trending fault and monocline structure within the northern portion of the basin, the Løvehovden fault, has lithological and thickness differences across it within the Minkinfjellet and possibly Ebbadalen formations. The fault shows W-side-down movement, defining a sub-basin within the larger half-graben. Significant along-strike changes occur. Down-throw to the west is at least 150 metres and possibly 400 metres, as shown by across-fault thickness differences of Ebbadalen and/or Minkinfjellet formations. To the east of the fault, the contact between the Ebbadalen and Minkinfjellet formations is a disconformity with significant local relief, and is interpreted to represent exposure from footwall uplift, and associated near- or at-surface solution, producing basal stratiform breccias. A similar contact is not exposed west of the fault. Monoclinal deformation and thickening of the younger Wordiekammen Formation above and across the monocline constrain a later movement component. Kinematic data and the structural style clearly indicate the Løvehovden fault is a normal fault with associated tri-shear zone development, consistent with the regional Carboniferous rift setting. Earlier interpretations describe the Løvehovden fault and monocline as Tertiary contractional features. In contrast, our work advocates that they are an important architectural basin element, defining a sub-basin within the Billeforden Trough during Minkinfjellet Formation deposition, with insignificant, if any, Tertiary reactivation. The Løvehovden fault is aligned with and represents the southern termination of the Lemströmfjellet fault to the north. Thus, the Billefjorden basin changes from a narrow graben to a broader half-graben to the south. These along-strike changes have important implications for the stratigraphic architecture of the basin, and for palaeogeographic reconstructions. These results and application of 3-D models for extension related tri-shear zones may help inform interpretation of other Carboniferous basins on the Barents Shelf.

An intensely deformed gneiss–migmatite terrane and a relatively undeformed granulite–granitoid terrane constitute the bulk of Precambrian basement in the northwestern Indian Shield. This article traces the structural evolution in the gneiss–migmatite terrane, where traditional methods of structural analysis are difficult to apply, and shows how successively developed folds can assume identical geometry and orientation at an advanced stage of progressive ductile shearing. The gneiss–migmatite terrane exemplifies a regional-scale ductile shear zone that preserves the history of polyphase folding and sheath folding. Geometrical similarity between individual/domain-scale sheath folds and mesoscopic/regional-scale folds implies that sheath folding is common at all scales in the gneiss–migmatite terrane. As the mylonite foliation that traces successive folds is curviplanar, the successively initiated hinge lines were curvilinear from their inception in the shear zone. At the advanced stage of ductile shearing, the hinge line curvatures were accentuated due to their rotation towards subvertically directed maximum stretching (X), and variably oriented fold axial planes were brought into approximate parallelism with the upright principal plane (XY) of the bulk strain ellipsoid. Eventually all the folds, irrespective of their relative order of development, became strongly non-cylindrical, extremely tight, isoclinal and approximately co-planar with respect to each other. It is due to the above geometrical modifications during ductile shearing that folds, irrespective of their order of development, now appear identical with respect to isoclinal geometry, axial plane orientation and hinge line curvilinearity. Evidence from the fold orientations, the deformed lineation patterns and the sheath fold geometry suggest that the shearing occurred in a general shear type of bulk strain, and NNW–SSE-directed subhorizontal compression resulted in subvertically directed stretching in the gneiss–migmatite terrane.

The hot emplacement of the Ronda peridotites (Betic Cordilleras) developed a dynamothermal aureole and partial melts that led to the intrusion of granite dykes in the peridotites. Previous geochronological data place rather broad limits for this event between 22 and 19 Ma. Analyses of neocrystalline zircon rims from large zircon populations yield a U–Pb SHRIMP age of 22.3±0.7 Ma for the dynamothermal aureole formation, and intrusion ages of granite dykes between 22.6±1.8 and 21.5±3.8 support that conclusion. Therefore, these new ages provide a more robust constraint on the hot emplacement of the Ronda peridotites at middle crustal levels.