Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-27T19:43:05.005Z Has data issue: false hasContentIssue false

The Testing of Adhesives for Timber

Published online by Cambridge University Press:  28 July 2016

Extract

Mr. Douglas : From very early days adhesives have played an important part in the joiners’ trade. The necessity for consistent high quality in glues and cements became acute when they were used under conditions of high stress in aircraft structures. It is natural, therefore, to find that aeronautical interests have been largely represented on research committees which have investigated the use of adhesives. At the end of 1919 the Adhesives Research Committee of the Department of Scientific and Industrial Research was formed to continue the work of the Adhesives Committee of the Conjoint Board of Scientific Societies. It was realised that one of the obstacles to the study of adhesives was the unsatisfactory nature of the tests which determine their strength in timber joints. Many properties of glue (such as viscosity, jelly strength, etc.) have been used to control variation during manufacture or as an indication of probable relative strengths in timber joints, but it has never been generallyadmitted that any simple property of the glue itself can be accepted as representative of the ability of that glue to effect a joint with timber. In the present state of our knowledge, therefore, it appears to be necessary to make final appeal to the timber glue test piece.

Type
Proceedings
Copyright
Copyright © Royal Aeronautical Society 1929

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Note on page 92 * “Report on the Materials of Construction used in Aircraft and Aircraft Engines,” H.M. Stationery Office, Chapter XI.

Note on page 115 * The arithmetical mean value of a large number of results is here assumed to be the “true” or “correct” value, and departure from this mean is assumed to be a normal “error.” The curves. from Which the estimates have been made each refer to tests using a particular species of timber and a particular type of gelatin glue, so that the estimates^ of probable error should include variation due to timber and to the use of different cakes; of glue, nominally the same.

Note on page 116 † This curve is adapted from Fig. IV., Aeronautical Research Committee, R. & M. No. 1125.