Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-12-01T01:05:30.509Z Has data issue: false hasContentIssue false
  • English
  • Français

A theoretical approach to the wedge shaped hot film probe performance

Published online by Cambridge University Press:  04 July 2016

M. Aminzadeh  and
V. J. Modi
M. Aminzadeh
Affiliation:
The University of British Columbia, Vancouver, Canada
V. J. Modi
Affiliation:
The University of British Columbia, Vancouver, Canada
Get access Rights & Permissions [Opens in a new window]

Extract

There are several well developed theories reported in literature for evaluating performance of a hot wire anemometer. On the other hand, although hot film probes play a rather useful role in the experimental liquid flow studies, no well developed theory systematically accounting for conduction and free convection losses is available, particularly, in the Reynolds number range of 2-350 (based on average flow rate and film width). This is indeed surprising since the fact that in this range of Rn viscous effects are of the same order as those due to inertia, was first recognised by Barker as early as in 1922. Thus it has been necessary to resort to careful calibration for each shape of the probe. The theory presented here represents a modest step towards minimising dependence on such tedious experimentation with reference to widely used wedged film probes.

Type
Technical Notes
Information
The Aeronautical Journal , Volume 80 , Issue 791 , November 1976 , pp. 489 - 491
Copyright
Copyright © Royal Aeronautical Society 1976 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

*

Post-Doctoral Fellow, Depart merit of Mechanical Engineering

†

Professor, Department of Mechanical Engineering

References

1. Wood, W. W. Calculations for anemometry with fine hot wires. J Fluid Mechanics, Vol 32, Pt 1, pp 9–19, 1968.Google Scholar
2. Perry, A. E. and Morrison, G. L. A study of the constant-temperature hot-wire anemometer. J Fluid Mechanics, Vol 47, Pt 3, pp 577–599, 1971.Google Scholar
3. Barker, M. On the use of very small pitot-tubes for measuring wind velocity. Proc Roy Sac, Series A, Vol 101, No 712, pp 435–445, August 1922.Google Scholar
4. Rotem, Z. The heated surface probe for measuring shear stress at the wall in laminar boundary layers. Canadian J. Chemical Engineering, Vol 45, pp 175–178, June 1967.Google Scholar
5. Moore, F. K. Theory of laminar flows, Princeton University Press, Princeton, New Jersey, p 127, 1964.Google Scholar
6. Rotem, Z. and Claassen, L. Natural convection above unconfined horizontal surfaces. J Fluid Mechanics, Vol 38, Pt 1, pp 173–192, 1969.Google Scholar
7. Sokolowski, M. Heat flow in a wedge with discontinuous boundaryconditions. Archiwum Mechaniki Stosowanej, Vol 4, No 13, pp 433–455, 1961.Google Scholar