Yield mapping techniques have only recently started to be implemented by the Californian wine grape industry, but the advancement has necessitated new processing methods for large vineyards. The process for mapping large blocks harvested with multiple machines has only recently occurred and implies that their yield monitors have to be calibrated and corrected to the same scale. Here we discuss two methods for processing yield maps at the commercial level. Method 1 depends on many calibrations with delivered fruit weight to a winery. Method 2 normalizes raw files automatically can reduce total processing time by up to 90%.

The goal of this work was the assessment of commercial vineyard water status using on-the-go thermal imaging. On-the-go thermal imaging acquisition was conducted with a thermal camera operating at 1.20 m distance from the canopy, mounted on a quad moving at 5 km/h. Canopy temperature, cross water stress index (CWSI) and stomatal conductance index (Ig) were strongly and significantly correlated to stem water potential (Ψstem) in east and west side of the canopy. For CWSI, the values of the coefficient of determination (R2) were 0.88*** and 0.73*** for east and west sides, respectively. As regards the index Ig, its relationships with Ψstem showed R2=0.89*** and R2=0.77*** for east and west sides, respectively. These results are promising and evidence the potential of on-the-go thermal imaging to become a new tool to evaluate the vineyard water status.

The nitrogen efficiency is the ratio between the output of nitrogen in the animal products and the input required for the livestock production. This ratio is a driver of the economic profitability and can be calculated at various levels of the production system: animal, field or farm. Calculated at the scale of the animal, it is generally low with less than half-ingested nitrogen remaining in the milk, the eggs or the meat in the form of proteins; the major part of the nitrogen being rejected in the environment. Significant gains were achieved in the past via the genetic improvement and the adjustment of feed supply. At the farm level, the efficiency increases to 45% to 50%, thanks to the recycling of animal excreta as fertilisers. From excretion to land application of manure, the losses of nitrogen are very variable depending on the animal species and the manure management system. Considering the risks of pollution swapping, all management and handling steps need to be considered. Collective initiatives or local rules on agricultural practices allow new opportunities to restore nitrogen balances on local territory.

Grassland silage management is generally ad hoc resulting in soil compaction damage. Literature suggests grass yield reductions of 5 to 74% through compaction (UK mean 13%), while a 2015 study, reported here, comparing grass dry matter (DM) yield between controlled traffic farming (CTF) and normal management (N), found a 13.5% (0.80 t ha−1) increase for CTF. Commercially available grass forage equipment with widths of 3 to 12 m set up for CTF reduced trafficked areas from 80%–90% for N to 40%–13%. Economic analysis based on 13% increase in DM for 2 and 3 cut systems, gave an increased grass value between £38 ha−1 and £98 ha−1. CTF for multi-cut grass silage effectively increases yields by reducing compaction and sward damage.

Good progress in crop husbandry and science requires that impacts of field-scale interventions can be measured, analysed and interpreted easily and with confidence. The term ‘agronōmics’ describes the arena for research created by field-scale digital technologies where these technologies can enable effective commercially relevant experimentation. Ongoing trials with ‘precision-farm research networks’, along with new statistical methods (and associated software), show that robust conclusions can be drawn from digital field-scale comparisons, but they also show significant scope for improvement in the validity, accuracy and precision of digital measurements, especially those determining crop yields.

Animal breeding should be considered as a permanent and cumulative approach to reducing the environmental footprint of dairy cattle production systems within an overall national and global mitigation strategy. Current international dairy cattle breeding goals do not explicitly include environmental traits, but observed improvements in milk production and both fertility and longevity contribute substantially to improving the environmental footprint relative to output. Ideally, however, environmental related traits, most notably greenhouse gas emissions and nitrogen excretion, should be explicitly included in national breeding goals with their own economic weight. Access to routine phenotypic observations for the environmental traits or other information including genomic information or information on heritable correlated traits is required for inclusion in the selection index. There is, however, a considerable paucity of information on the genetic parameters for, in particular, greenhouse gas emissions in dairy cattle; these parameters include genetic variance estimates, as well as genetic and phenotypic (co)variances with other performance traits. Large studies with well phenotyped animals across a range of environments are needed to estimate such parameters and also investigate the extent, if any, of genotype-by-environment interactions across contrasting environments. Considerable genetic variation in milk urea nitrogen, as a proxy for nitrogen excretion in the urine, exist and suggest that breeding programmes to improve nitrogen use efficiency will be fruitful. However, because of the antagonistic genetic correlations between milk urea nitrogen and milk production, genetic gain in milk yield is expected to be compromised within a breeding goal that includes milk urea nitrogen.

On the basis of a review of the industry, the dynamics of past trends and current questions about its future, the foresight panel identified around 40 drivers of change likely to impact the future of the horse industry. These were categorised, prioritised and organised into five components that formed the basis of the scenario-building exercise:

• • the economic and societal context;

• • public expectations of horses and of equestrian and horseracing activities;

• • public policy and regulation;

• • equestrianism and horseracing;

• • the organisation and strategies of horse producers.

This chapter presents the main trends and future outlooks for the factors encompassed within these five major thematic areas synthesised in microscenarios.

Climate change is a growing international concern, and it is well established that the release of greenhouse gases (GHG) is a contributing factor. So far, within animal production, there is little or no concerted effort on long-term breeding strategies to mitigate against GHG from ruminants. In recent years, several consortia have been formed to collect and combine data for genetic evaluation. The discussion areas of these consortia focus on (1) What are methane-determining factors, (2) What are genetic parameters for methane emissions, (3) What proxies can be used, and what is their association with methane emission, and (4) How to move on with breeding for lower emitting animals? The methane-determining factors can be divided into four groups: (1) rumen microbial population, (2) feed intake and diet composition, (3) host physiology and (4) host genetics. The genetic parameters show that enteric methane is a heritable trait, and that it is highly genetically correlated with dry matter intake. So far, the most useful proxies relate to feed intake, milk mid IR spectral data and fatty acids in the milk. To be able to move on with a genetic evaluation and ranking of animals for methane emission, it is crucial to make measurements on commercial farms. In order to make that possible, it will be necessary to develop phenotypes that can be used by the farmer to optimise the production on farm level. Also, it is crucial to develop equipment that makes it possible to make measurements without interfering with everyday routines or identify proxies that are highly related to methane and which could easily be measured on a large scale. International collaboration is essential to make progress in this area. This is both in terms of sharing ideas, experiences and phenotypes, but also in terms of coming to a consensus regarding what phenotype to collect and to select for.

Nitrogen (N) losses from dairy production systems are a cause for environmental concern. Excreted primarily as urea N in the urine, this volatile form of N can be lost as ammonia (NH3) contributing to ground-level ozone, the greenhouse effect and the deterioration of terrestrial and aquatic ecosystems. In addition, the production of urea N places a metabolic demand for energy on the dairy cow and excessively high levels of blood urea N are known to have deleterious effects on reproductive performance. Therefore, it is of interest to develop strategies that reduce N excretion from dairy cows and to this end, dietary manipulation of N efficiency offers great potential. There are a significant number of reports in the literature on N efficiency in the lactating dairy cow, including reducing dietary CP intake, improving the balance of amino acids reaching the small intestine, optimising the forage mix and optimising the energy sources in the diet. Across these experiments, N intake ranged from 0.33 to 0.67 kg/day with N efficiency ranging from 0.21 to 0.42. This paper will report on recent N balance experiments conducted at University College Dublin, as well as reports in the literature on studies aimed at improving N efficiency in the lactating dairy cow.

The integration of conservation agriculture with the benefits of precision farming represents an innovative feature aimed to achieve better economic and environmental sustainability. The synergy between these principles was assessed through a technical feasibility and energy efficiency to define the best approach depending on different agricultural systems, spatial and temporal field variability. The study compares three conservation tillage techniques supported by precision farming with conventional tillage in a specific crop rotation: wheat, rapeseed, corn and soybean. The preliminary results show a positive response of precision farming in all the conservation tillage systems, increasing yields until 22%. The energy efficiency achieves highest level in those techniques supported by precision farming, gaining peak of 9% compared to conventional tillage.

Research on precision viticulture on table grapes is relative new compared to wine grapes. The aim of this study was to assess the spatiotemporal stability of yield and quality components in a vineyard of table grapes. The study was conducted in a commercial vineyard (1.4 ha) of table grapes for two successive cultivation years 2015 and 2016. Yield and quality parameters were assessed using destructive and non-destructive methods. The preliminary results revealed that spatiotemporal stability of management zones is affected by weather conditions and is different for each crop parameter, while NDVI presented good performance for delineating management zones.

LiDAR technology is one option to collect spatial data about canopy geometry in many crops. However, the method of data acquisition includes many errors related to the LiDAR sensor, the GNSS receiver and the data acquisition set up. Therefore, the objective of this study was to evaluate the errors involved in the data acquisition from a mobile terrestrial laser scanner (MTLS). Regular shaped objects were scanned with a developed MTLS in two different tests: i) with the system mounted on a vehicle and ii) with the system mounted on a platform running over a rail. The errors of area estimation varied between 0.001 and 0.071 m2 for the circle, square and triangle objects. The errors on volume estimations were between 0.0003 and 0.0017 m3, for cylinders and truncated cone.

Inversing the STICS crop model with remote-sensing-derived leaf area index (LAI) and yield data from the previous crop is used to retrieve some soil permanent properties and crop emergence parameters. Spatialized nitrogen (N) fertilization recommendations are provided to farmers, for the second and third N applications, following the screening of eleven N application rates under a range of possible forthcoming climates, with the objective to maximize of the gross margin while respecting some environmental constraints. As a first field validation, we show (1) the improvement brought by the assimilation of LAI and yield into STICS to simulate crop and soil variables and (2) the interest of site specific application to maximize both the gross margin and the agro-environmental criterion.