Published online by Cambridge University Press: 05 April 2016
Advancements in semiconductor technology have led to a steady increase in the unity power gain frequency (fmax) of silicon transistors, both in CMOS and SiGe BiCMOS technologies. This, in turn, enables realization of complex monolithic silicon integrated circuits operating at the millimeter-wave (mm-wave) frequency range (typically defined as 30–300 GHz). Prime target applications of silicon mm-wave integrated systems include high-speed wireless access, satellite communications, high-resolution automotive radars, and imagers for security, industrial control, healthcare, and other applications. However, scaling of silicon transistors for high fmax comes at the expense of reduced breakdown voltages, and hence limitations on output voltage swing and power. The link range and energy consumption of wireless systems are direct functions of the transmitter output power and efficiency, respectively. Efficient generation and amplification of radio-frequency (RF) modulated waveforms using silicon transistors is an ongoing challenge due to the reduced breakdown voltage of scaled silicon transistors, loss of passive components, and the conventional linearity–efficiency trade-off. This book covers the fundamentals, technology options, circuit architectures, and practical demonstrations of mm-wave wireless transmitters realized in silicon technologies.
Why mm-waves?
The main motivation to operate the wireless systems at higher carrier frequencies is the larger available bandwidth which translates to higher data rate in communication systems and higher resolution in ranging and imaging systems. Furthermore, the size of the antenna and circuitry, typically proportional to the wavelength, reduces with increasing carrier frequency. On the other hand, operating at higher frequencies poses two fundamental challenges. First, the loss of most materials increases with the frequency; therefore, compared with radio and microwave frequencies (below 30 GHz) the electromagnetic wave at mm-wave frequencies is attenuated more as it propagates in an environment (Fig. 1.1). It should be noted that over the mm-wave spectrum there are “windows” of relatively lower attenuation around 35 GHz, 90 GHz, 140 GHz, etc., and, consequently, these bands are often selected for mm-wave applications; on the other hand, high atmospheric attenuation levels around frequencies such as 60 GHz enable more aggressive frequency reuse, and are therefore often selected for small cell or secure communications applications. Second, the performance of semiconductor devices worsens with frequency; this includes reduced gain, increased noise, and more nonlinearity at higher frequencies for a given technology.
To save this book to your Kindle, first ensure [email protected] is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.