Shaped-charge (Munroe) Jets and Projectile Penetration

Alexander L. Yarin; Ilia V. Roisman; Cameron Tropea

doi:10.1017/9781316556580.014

13 - Shaped-charge (Munroe) Jets and Projectile Penetration

from Part V - Solid–Solid Collisions

Published online by Cambridge University Press: 13 July 2017

Alexander L. Yarin ,

Ilia V. Roisman and

Cameron Tropea

Show author details

Alexander L. Yarin: Affiliation:
University of Illinois, Chicago
Ilia V. Roisman: Affiliation:
Technische Universität, Darmstadt, Germany
Cameron Tropea: Affiliation:
Technische Universität, Darmstadt, Germany

Book contents

Get access

Summary

The first two sections in the present chapter are devoted to penetration of shaped-charge (Munroe) jets. Shaped-charge jets are characterized by such tremendous stresses that metal flow can be treated in the framework of potential flow hydrodynamics. Section 13.1 is devoted to the elementary theory of penetration depth of a shapedcharge jet perforating an armor, while Section 13.2 describes a detailed structure of the corresponding metal flow and predicts the crater shape using the hodograph method of complex analysis in the planar case. An estimate for an axisymmetric case is also given in this section. Normal penetration of eroding projectiles into elastic–plastic targets is covered in Section 13.3. The limit of high-speed penetration where pressure and the inertial effects are dominant is considered in Section 13.4, and the quasi-steady regime of penetration of an eroding projectile is treated in Section 13.5. Section 13.6 is devoted to description of normal and oblique penetration of rigid projectiles and comparison with numerous experimental data. Explosion welding discussed in Section 13.7 is also characterized by tremendous stresses, while the resulting metal flow is not only “inviscid” but even compressible. Still, the problem can be reduced to the form appropriate for complex analysis, which reveals some important details of the interface formation between two materials welded by this method. The experimental evidence shows some additional fascinating details which deserve a further analysis.

Shaped-charge Jet Penetration Depth

In 1888, Munroe discovered the phenomenon of so-called shaped-charge (or Munroe) jets. Later on, he described it in the following words (Munroe 1900):

“Among the experiments made … was one upon a safe twenty-nine inches cube, with walls four inches and three quarters thick, made up of plates of iron and steel … When a hollow charge of dynamite nine pounds and a half in weight and untamped was detonated on it, a hole three inches in diameter was blown clear through the wall … The hollow cartridge was made by tying the sticks of dynamite around a tin can, the open mouth of the latter being placed downward.”

Type: Chapter
Information: Collision Phenomena in Liquids and Solids , pp. 515 - 565

DOI: https://doi.org/10.1017/9781316556580.014 [Opens in a new window]

Publisher: Cambridge University Press

Print publication year: 2017

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Alekseevskii, V. P. (1969). Penetration of a rod into a target at high velocity, Combust. Explos. Shock Waves 2: 63–66.Google Scholar

Anderson Jr., C. E., Morris, B. L. and Littlefield, D. L. (1992). A penetration mechanics database, Report, Southwest Research Institute, San Antonio, TX.

Anderson Jr., C. E., Orphal, D. L., Franzen, R. R. and Walker, J. D. (1999). On the hydrodynamic approximation for long-rod penetration, Int. J. Impact Eng. 22: 23–43.Google Scholar

Batchelor, G. K. (2002). An Introduction to Fluid Dynamics, Cambridge University Press.

Birkhoff, G., MacDougall, D. P., Pugh, E. M. and Taylor, G. I. (1948). Explosives with lined cavities, J. Appl. Phys. 19: 563–582.Google Scholar

Birkhoff, G. and Zarantonello, E. H. (1957). Jets, Wakes, and Cavities, Academic Press, New York.

Courant, R. and Friedrichs, K. O. (1976). Supersonic Flow and Shock Waves, Springer, Berlin.

Frankel, I. and Weihs, D. (1990). Hydrodynamic theory of glancing impact, J. Fluid Mech. 216: 213–229.Google Scholar

Fugelso, E. and Taylor, J. W. (1978). Evaluation of combined obliquity and yaw for U 0.75 wt% Ti penetrators, Report LA-7402-MS, Los Alamos National Laboratory, Los Alamos.

Godunov, S. K., Deribas, A. A., Zabrodin, A. V. and Kozin, N. S. (1970). Hydrodynamic effects in colliding solids, J. Comput. Phys. 5: 517–539.Google Scholar

Godunov, S. K., Kiselev, S. P., Kulikov, I. M. and Mali, V. I. (2013). Numerical and experimental simulation of wave formation during explosion welding, Proc. Steklov Inst. Math. 281: 12–26.Google Scholar

Grabarek, C. L. (1971). Penetration of armor by steel and high density penetrators, Technical Report BRL MR 2134, Ballistic Res. Lab., Aberdeen Proving Ground.

Gupta, N. K. and Madhu, V. (1992). Normal and oblique impact of a kinetic energy projectile on mild steel plates, Int. J. Impact Eng. 12: 333–343.Google Scholar

Gurevich, M. I. (1966). The Theory of Jets in an Ideal Fluid, Pergamon Press, Oxford.

Henrici, P. (1974). Applied and Computational Complex Analysis, JohnWiley & Sons, New York.

Hill, R. (1998). The Mathematical Theory of Plasticity, Oxford University Press.

Hohler, V., Schneider, E., Stilp, A. and Tham, R. (1978). Length and velocity reduction of high density rods perforating mild steel and armor steel plates, in Proc 4th Int. Symp. on Ballistics, Monterey, CA, USA, Vol. 1.

Kochin, N. E., Kibel, I. A. and Rose, N. V. (1964). Theoretical Hydrodynamics, Interscience Publishers, New York.

Lamb, H. (1959). Hydrodynamics, Cambridge University Press.

Lambert, J. P. (1978). The terminal ballistics of certain 65 gram long rod penetrators impacting steel armor plate, Technical report, DTIC Document.

Lavrentiev, M. A. (1957). Shaped-charge jets and the principles of their work, Uspekhi Mat. Nauk 12: 41–56. (in Russian).Google Scholar

Lavrentiev, M. A. and Shabat, B. V. (1973a). Methods of the Theory of Functions of Complex Variable, Nauka, Moscow. (in Russian).

Lavrentiev, M. A. and Shabat, B. V. (1973b). Hydrodynamic Problems and their Mathematical Models, Nauka, Moscow. (in Russian).

Liepmann, H. W. and Roshko, A. (1957). Elements of Gasdynamics, John Wiley & Sons, New York.

Loitsyanskii, L. G. (1966). Mechanics of Liquids and Gases, Pergamon Press, Oxford.

Munroe, C. E. (1900). The applications of explosives, Appleton's Popular Science Monthly 56: 300–312. 444–455.Google Scholar

Nobili, A. and Banker, J. (1997). Recent developments in zirconium-steel explosion clad, in J., Haygarth and J., Tosdale (eds.), Reactive Metals in Corrosive Applications Conference Proceedings, Wah Chang, Albany, pp. 83–88.

Ravid, M. and Bodner, S. R. (1983). Dynamic perforation of viscoplastic plates by rigid projectiles, Int. J. Eng. Sci. 21: 577–591.Google Scholar

Ravid, M., Bodner, S. R. and Holcman, I. (1987). Analysis of very high speed impact, Int. J. Eng. Sci. 25: 473–482.Google Scholar

Ravid, M., Bodner, S. R. and Holcman, I. (1994). A two-dimensional analysis of penetration by an eroding projectile, Int. J. Impact Eng. 15: 587–603.Google Scholar

Roisman, I. V. (1994). Description of Projectile Penetration with Small Deborah Number, PhD thesis, Technion-Israel Institute of Technology, Haifa, Israel.

Roisman, I. V., Weber, K., Yarin, A. L., Hohler, V. and Rubin, M. B. (1999). Oblique penetration of a rigid projectile into a thick elastic–plastic target: theory and experiment, Int. J. Impact Eng. 22: 707–726.Google Scholar

Roisman, I. V., Yarin, A. L. and Rubin, M. B. (1997). Oblique penetration of a rigid projectile into an elastic-plastic target, Int. J. Impact Eng. 19: 769–795.Google Scholar

Roisman, I. V., Yarin, A. L. and Rubin, M. B. (2001). Normal penetration of an eroding projectile into an elastic–plastic target, Int. J. Impact Eng. 25: 573–597.Google Scholar

Sagomonyan, A. Y. (1974). Penetration, Moscow University Press, Moscow. (in Russian).

Senf, H., Strassburger, E., Rothenhausler, H., Gooch, W. A. and Burkins, M. (1995). Investigation of the ballistic resistance of ceramic/steel targets versus short tungsten alloy rods., EMI Report 11/95, Ernst-Mach-Institute, Germany.

Tate, A. (1967). A theory for the deceleration of long rods after impact, J. Mech. Phys. Solids 15: 387–399.Google Scholar

Tate, A. (1969). Further results in the theory of long rod penetration, J. Mech. Phys. Solids 17: 141–150.Google Scholar

Tate, A. (1978). A simple hydrodynamic model for the strain field produced in a target by the penetration of a high speed long rod projectile, Int. J. Eng. Sci. 16: 845–858.Google Scholar

Tate, A. (1986a). Long rod penetration models – Part I. A flow field model for high speed long rod penetration, Int. J. Mech. Sci. 28: 535–548.Google Scholar

Tate, A. (1986b). Long rod penetration models – Part II. Extensions to the hydrodynamic theory of penetration, Int. J. Mech. Sci. 28: 599–612.Google Scholar

Tate, A., Green, K., Chamberlain, P. and Baker, R. (1978). Model scale experiments on long rod penetration, in Proc. 4th Int. Symp. on Ballistics, pp. 17–19.

Walker, J. D. and Anderson, C. E. (1995). A time-dependent model for long-rod penetration, Int. J. Impact Eng. 16: 19–48.Google Scholar

Weidemaier, P., Senf, H., Rothenhausler, H., Filbey, G. L. and Gooch, W. A. (1993). On the ballistic resistance of laminated steel targets. Experiments and numerical calculations, in Proc. of the 14th Int. Symp. on Ballistics, Quebec, Canada, Vol. 26, p. 29.Google Scholar

Yarin, A. L., Rubin, M. B. and Roisman, I. V. (1995). Penetration of a rigid projectile into an elastic-plastic target of finite thickness, Int. J. Impact Eng. 16: 801–831.Google Scholar

Zukas, J. (1990). High Velocity Impact Dynamics, John Wiley & Sons, New York.

Book contents

13 - Shaped-charge (Munroe) Jets and Projectile Penetration

Summary

Access options

References

Save book to Kindle

Save book to Dropbox

Save book to Google Drive