Several barrier types are envisaged to minimize the release of radionuclides from waste matrices into groundwater. In a number of countries argillaceous rocks make up the natural barrier that will isolate radioactive substances from the aquifer. The present study addresses the influence of pore geometry as a limiting factor for anion diffusion in argillaceous rocks. Irrespective of the pore core size, anion diffusion can be limited by the pore-size opening, i.e. if the pore opening is so narrow that the electric double layers overlap and form a barrier to anions irrespective of the pore size. This so-called ‘bottleneck effect’ limits the anion diffusion. The present study extends previous investigations that focused on other factors which limit anion diffusion, e.g. mineralogy or interlayer equivalent pores. The existence of bottleneck pores was confirmed by effective tortuosity calculations and retention-potential measurements using mercury intrusion porosimetry. On the basis of two different core samples from argillaceous rocks from Switzerland, Opalinus Clay and Helvetic Marl, this work shows evidence of the existence of bottleneck pores. The larger permanent anion exclusion in the Helvetic Marl sample compared to the Opalinus Clay sample can be explained by the larger retention potential and larger effective tortuosity of the Helvetic Marl rock, which indicates more pores with bottleneck effects than is the case for the Opalinus Clay rock.

Quantitative structural characterization of nanomaterials is important to tailor their functional properties. Corrosion of AgAu-alloy nanoparticles (NPs) results in porous structures, making them interesting for applications especially in the fields of catalysis and surface-enhanced Raman spectroscopy. For the present report, structures of dealloyed NPs were reconstructed three-dimensionally using scanning transmission electron microscopy tomography. These reconstructions were evaluated quantitatively, revealing structural information such as pore size, porosity, specific surface area, and tortuosity. Results show significant differences compared to the structure of dealloyed bulk samples and can be used as input for simulations of diffusion or mass transport processes, for example, in catalytic applications.

This work presents a series of three-dimensional computational methods with the objective of analyzing and quantifying some important structural characteristics in a collection of low-density polyolefin-based foams. First, the solid phase tortuosity, local thickness, and surface curvature, have been determined over the solid phase of the foam. These parameters were used to quantify the presence of wrinkles located at the cell walls of the foams under study. In addition, a novel segmentation technique has been applied to the continuous solid phase. This novel method allows performing a separate analysis of the constituting elements of this phase, that is, cell struts and cell walls. The methodology is based on a solid classification algorithm and evaluates the local topological dissimilarities existing between these elements. Thanks to this method it was possible to perform a separate analysis of curvature, local thickness, and corrugation ratio in the solid constituents that reveals additional differences that were not detected in the first analysis of the continuous structure. The methods developed in this work are applicable to other types of porous materials in fields such as geoscience or biomedicine.

Tannin-based rigid foams of different bulk densities and their carbonized counterparts were investigated for the first time by X-ray microtomography. This method allowed acquisition of three-dimensional pictures of such highly porous materials. Through mathematical treatment of the images, extremely useful physical characteristics such as porosity, fraction of open cells, connectivity, tortuosity, and pore-size distribution were determined as a function of the foam's density. The obtained information was compared with independent data derived from pycnometry measurements and scanning electron microscope image analysis. The agreement was shown to be acceptable in the limit of the accuracy of the laboratory microtomograph (4 μm). Moreover, recalculating properties like permeability were shown to be quite possible based on the results of standard microtomography data.

We describe what is, to the best of our knowledge, a previously unreported association in patients with similar facial features, skin and joint laxity, of lengthening and tortuosity of systemic, pulmonary and coronary vessels. We evaluated 12 patients with similar phenotypes, from eight different families. Detailed echocardiographic and angiographic evaluations were performed in all, and biopsies of the skin in seven. All patients have elongated facies, prominent ears, micrognathia and laxity of their joints. Angiographic pictures showed a varying degree of lengthening and tortuosity of systemic, pulmonary, and coronary arteries. Pulsatile carotid arteries formed cervical masses in 2 patients, and three had severe renal arterial stenoses. All showed varying degrees of branch and peripheral pulmonary arterial stenosis, necessitating placement of stents in six. Biopsy of the skin proved normal in all seven patients studied, thus excluding cutis laxa, Ehlers-Danlos and Marfan syndromes. The constellation of abnormalities suggests a genetic syndrome of connective tissue etiology. Further genetic studies, and gene mapping, are underway.