Amaranthus species are problematic weeds in snap bean production systems. They reduce crop yields, and their stem fragments contaminate harvested pods. Knowledge of snap bean tolerance to different preemergence herbicides is limited; however, knowing this tolerance is essential for planning a reliable weed management system, breeding herbicide-tolerant cultivars, and registering herbicides for use on minor crops such as snap bean. Field trials were conducted in 2021 and 2022 to determine the tolerance of eight snap bean cultivars to preemergence herbicides with activity on Amaranthus species, including dimethenamid-P, flumioxazin, lactofen, metribuzin, saflufenacil, and sulfentrazone. Snap bean plant density (number of plants per square meter), plant biomass (grams per plant), and canopy biomass (grams per square meter) 21 d after treatment were used to assess crop tolerance to a range of herbicide rates. Linear mixed-effects regression models were fitted to quantify the relationships between preemergence herbicide rate and snap bean cultivar tolerance. Results indicated a high margin of crop safety with dimethenamid-P and lactofen for weed control in snap bean, and a low margin of crop safety with metribuzin and saflufenacil. Results indicated differential cultivar tolerance to flumioxazin and sulfentrazone, which could be driven by genetic variability among cultivars.

Tiafenacil is registered in the United States for use in annual crops such as corn and soybean, but not on orchard crops. Field studies were conducted to determine orchard crop safety and efficacy of tiafenacil on important California orchard weeds. To evaluate crop safety, tiafenacil was applied at 74, 148, and 222 g ai ha−1 alone and with 38 g ai ha−1 of tolpyralate three times per year at the base of almond, pistachio, prune, and walnut trees. The first treatment was applied 2 mo after the trees had been transplanted. In all four tree crop experiments, treatments were applied once in May 2020, then three times again during the winter of 2021 and 2022 at 21-d treatment intervals. There were no visual foliar injury symptoms or treatment-related effects on tree trunk diameter change even at the highest tested rate of tiafenacil applied seven times over three growing seasons. In a separate study of weed control, in most instances, tiafenacil applied at 12 g ai ha−1 performed similarly to that of tiafenacil plus glufosinate. Control of glyphosate-resistant hairy fleabane with tiafenacil applied alone at 25 g ai ha−1 was 65% by 14 d after treatment. Tiafenacil applied at 50 g ai ha−1 to hairy fleabane performed similarly to glufosinate plus glyphosate. In a greenhouse study, tiafenacil applied at 12 g ha−1 provided 95% to 100% control of barnyardgrass and junglerice, and there was no significant difference between tiafenacil applied alone or with glufosinate. Saflufenacil applied alone or in a mixture with glufosinate was not as effective as the tiafenacil treatments for grass weed control. Based on experiments conducted over three growing seasons in four tree fruit and tree nut crops, tiafenacil crop safety appeared to be acceptable even at up to 2- or 3-fold the expected use rate.

Downy brome is a cleistogamous facultative winter-annual grass weed that invades cropland, pastureland, and ruderal areas in western North America. Glyphosate-resistant downy brome, the first known glyphosate-resistant grass weed in Canada, was confirmed in a glyphosate-resistant canola field in southern Alberta in 2021. A controlled-environment study was conducted to determine the impact of preemergence soil-applied residual herbicides on glyphosate-resistant and susceptible downy brome in two field soils. Flumioxazin/pyroxasulfone (70/89 g ai ha−1), carfentrazone/pyroxasulfone (18/150 g ai ha−1), sulfentrazone/pyroxasulfone (100/100 or 150/150 g ai ha−1), and saflufenacil/pyroxasulfone (36/120 g ai ha−1) resulted in excellent (≥90%) visible control and downy brome biomass reduction 8 wk after treatment (WAT). The low rate of carfentrazone/pyroxasulfone (12/100 g ai ha−1) resulted in good (≥80%) visible control and biomass reduction 8 WAT, while the low and medium rates of saflufenacil/pyroxasulfone (18/60 or 25/84 g ai ha−1) resulted in ≥80% biomass reduction but suppression only (66% to 75%) based on visible control. Flumioxazin alone (105 g ai ha−1) resulted in good visible control (81%) 8 WAT in a sandy loam soil, but poor (13%) control in a clay loam soil. Soil type affected plant growth as evidenced by reduced growth in the untreated sandy loam soil compared to clay loam soil. The glyphosate-resistant population emerged and grew more vigorously than the glyphosate-susceptible population resulting in greater plant densities in the untreated control and some less-effective herbicide treatments. These results suggest that mixtures of a protoporphyrinogen oxidase-inhibiting herbicide with the very-long-chain fatty acid elongase inhibitor pyroxasulfone applied preemergence at ≥89 g ai ha−1 could be effective components of an herbicide layering strategy targeting glyphosate-resistant and glyphosate-susceptible downy brome.

Monitoring herbicide-resistant weeds makes it possible to study the evolution and spread of resistance, which provides important information for their management. The objective of this study was to map fleabane accessions in the states of Paraná (PR) and Mato Grosso do Sul (MS), Brazil, to identify herbicide-resistant accessions and their response to soybean preplant chemical burndown management strategies. Fleabane seeds were collected in agricultural areas in PR and MS in 2018, 2019, and 2020. Initial screening was performed for glyphosate, chlorimuron, paraquat, 2,4-D, saflufenacil, and glufosinate efficacy. Subsequently, dose-response experiments were conducted. Field experiments were carried out in three locations, where accessions of multiple herbicide–resistant Sumatran fleabane were identified. Herbicides were used in single or sequential applications at three plant heights (<5 cm, 5 to 10 cm, and >10 cm). After preliminary screening, accessions were classified as putative resistant (<80% control for all four replicates), segregated (<80% control for one to three replicates), or susceptible (>80% control for all four replicates). There was no evidence of resistance to glufosinate or saflufenacil in any of the 461 accessions, while 65 demonstrated possible resistance or segregation to glyphosate only, 235 to glyphosate + chlorimuron, 79 to glyphosate + chlorimuron + paraquat, 59 to glyphosate + chlorimuron + 2,4-D, and 23 with four-way resistance (glyphosate, chlorimuron, paraquat, and 2,4-D). Of these 23 accessions, seven were analyzed using dose-response curves (F2 generation), all from PR, confirming four-way resistance to glyphosate, chlorimuron, paraquat, and 2,4-D. To control resistant Sumatran fleabane, an application should prioritize smaller plants. Despite resistance to 2,4-D, double mixtures containing this herbicide were among the most effective treatments in plants <5 cm in height. If a sequential application is needed for plants >5 cm in height, we recommend glyphosate + synthetic auxin followed by glufosinate or glyphosate + saflufenacil.

Soil-applied herbicides are important for controlling weeds in many crops but risk damage to susceptible rotational crops if they persist. Field studies were conducted in Powell, WY, from 2015 through 2017 to evaluate the effect of reduced water availability on soil-applied herbicide dissipation. Eight soil-applied herbicides, applied to dry bean or corn, were exposed to three season-long irrigation treatments (100%, 85%, and 70% of estimated crop evapotranspiration [ETc]) by overhead sprinkler. Soil samples were collected to a depth of 10 cm from 0 to 140 d after application, and soil herbicide concentrations were quantified using gas or liquid chromatography and mass spectrometry. Herbicide concentrations were regressed over time to produce a soil half-life estimate for each herbicide and irrigation treatment. Reduced irrigation decreased dry bean yield by up to 77% and corn yield by up to 50%. After adjusting for precipitation, the lowest irrigation treatment received 78% and 76% as much water as the full irrigation treatment in 2015 and 2016, respectively. This significantly increased the soil half-life of imazethapyr but did not increase the soil half-life of atrazine, pyroxasulfone, saflufenacil, ethalfluralin, trifluralin, or pendimethalin. Reduced irrigation did not increase carryover injury to rotational crops from these herbicides 1 yr after application. Instead, carryover response was determined by the inherent persistence of individual herbicides. Imazethapyr (0.1 kg ai ha−1) injured rotational sugar beet, and isoxaflutole (0.1 kg ai ha−1) injured rotational dry bean. Pyroxasulfone (0.2 kg ai ha−1), atrazine (2.0 kg ai ha−1), saflufenacil (0.1 kg ai ha−1) + dimethenamid-P (0.6 kg ai ha−1), ethalfluralin (0.8 kg ai ha−1), trifluralin (0.6 kg ai ha−1), and pendimethalin (1.1 kg ai ha−1) did not injure rotational crops regardless of irrigation treatment. Drought stress sufficient to cause up to 77% crop yield loss did not increase soil-applied herbicide carryover.

Glyphosate-resistant (GR) biotypes of horseweed were first confirmed in southern Ontario in 2010 and have spread across southern Ontario. A total of four field experiments were conducted between 2021 and 2022 to determine GR horseweed control with one- and two-pass herbicide programs in glyphosate/glufosinate/2,4-D-resistant (GG2R) soybean. 2,4-D choline/glyphosate DMA, halauxifen-methyl, and saflufenacil applied preplant (PP) controlled GR horseweed by 59%, 72%, and 78% 8 wk after postemergence (POST) application (WAA-POST); there was no improvement of GR horseweed control when 2,4-D choline/glyphosate DMA was added to saflufenacil; in contrast, there was improved GR horseweed control when saflufenacil was added to 2,4-D choline/glyphosate DMA. Glufosinate and 2,4-D choline/glyphosate DMA applied POST controlled glyphosate-resistant horseweed by 71% and 86%, respectively, 8 WAA-POST. Two-pass herbicide programs of a PP followed by POST application provided greater GR horseweed control than a PP or POST herbicide applied alone. Glufosinate or 2,4-D choline/glyphosate DMA applied POST following 2,4-D choline/glyphosate DMA or halauxifen-methyl applied PP improved GR horseweed control by 29% to 38% and 24%, respectively at 8 WAA-POST. The application of 2,4-D choline/glyphosate DMA applied POST following saflufenacil applied PP improved control by 20% 8 WAA-POST; there was no improvement of GR horseweed control when glufosinate was applied POST following saflufenacil applied PP or when either POST herbicide was applied following saflufenacil + 2,4-D choline/glyphosate DMA applied PP. When used in a two-pass program, 2,4-D choline/glyphosate DMA POST provided 2% to 3% greater control of GR horseweed than glufosinate.

Little information is available on the relative efficacy of Group 4 herbicides for glyphosate-resistant (GR) horseweed management in soybean. Five field research experiments were conducted in growers’ fields from 2020 to 2021 to determine GR horseweed control with Group 4 herbicides applied preplant (PP) alone and in a mixture. There was minimal soybean injury (≤4%) with herbicides evaluated. Dicamba, 2,4-D, or halauxifen-methyl applied PP controlled GR horseweed 92% to 96%, 73% to 76%, and 85% to 89%, respectively. The mixtures of dicamba + 2,4-D, dicamba + halauxifen-methyl and dicamba + 2,4-D + halauxifen-methyl provided 97% to 99% control of GR horseweed, similar to dicamba applied alone. The mixture of 2,4-D + halauxifen-methyl provided 93% to 94% control of GR horseweed. Dicamba + saflufenacil controlled GR horseweed at 98%. Dicamba alone, dicamba + 2,4-D ester, dicamba + halauxifen-methyl, and dicamba + 2,4-D ester + halauxifen-methyl decreased GR horseweed density 97%, 99%, 99%, and 98%, respectively, similar to a 98% density reduction with dicamba + saflufenacil. Other herbicide treatments had no effect on GR horseweed density. Dicamba, 2,4-D, and halauxifen-methyl applied PP decreased GR horseweed dry biomass by 99%, 76%, and 72%, respectively. The mixtures of dicamba + 2,4-D, dicamba + halauxifen-methyl, and dicamba + 2,4-D + halauxifen-methyl decreased GR horseweed dry biomass by 99% to 100%, similar to a 99% dry biomass reduction with dicamba + saflufenacil. The mixture of 2,4-D + halauxifen-methyl decreased GR horseweed dry biomass by 94%. Soybean yield was decreased by 61% when GR horseweed was left uncontrolled. Results show that Group 4 herbicides that include dicamba applied PP can be very effective in managing GR horseweed in soybean.

The objectives of this study were to determine if the level and consistency of glyphosate-resistant (GR) horseweed control prior to soybean planting can be improved by (i) adding halauxifen-methyl, 2,4-D ester, saflufenacil, metribuzin, or dicamba to glufosinate, (ii) increasing the rate of glufosinate from 500 to 1,000 g ai ha–1, and (iii) adding 28% urea ammonium nitrate (UAN) as the carrier solution. During a 2-yr period (2020–2021), four field trials were conducted on commercial farms located in southwestern Ontario, Canada, with confirmed GR horseweed. Glufosinate controlled GR horseweed 65%, 66%, and 63% at 2, 4, and 8 wk after application (WAA), respectively, and reduced density and biomass 46% and 33% at 8 WAA, respectively. There was no improvement in GR horseweed control from the addition of halauxifen-methyl, 2,4-D ester or saflufenacil to glufosinate and no decrease in density and biomass, with the exception that the addition of saflufenacil to glufosinate reduced density 30% compared to glufosinate alone. The addition of metribuzin to glufosinate improved GR horseweed control by 22%, 22%, and 28% at 2, 4, and 8 WAA, respectively, and further reduced density and biomass 50% and 47%, respectively, at 8 WAA, respectively. The addition of dicamba to glufosinate improved GR horseweed control by 19%, 26%, and 30% at 2, 4, and 8 WAA, respectively, and further reduced density and biomass 54% and 60%, respectively, at 8 WAA. There was no improvement in GR horseweed control by increasing the rate of glufosinate from 500 to 1,000 g ai ha–1 or when using 28% UAN as the carrier solution. The addition of all herbicides to glufosinate, increasing the rate of glufosinate, or using 28% UAN as the carrier solution improved the consistency of GR horseweed control.

Glyphosate-resistant (GR) horseweed interference in soybean can reduce soybean yield up to 93%. Glyphosate plus dicamba, 2,4-D ester, halauxifen-methyl or pyraflufen-ethyl/2,4-D applied preplant (PP) provide variable GR horseweed control in soybean. The objective of this study was to determine if the addition of saflufenacil or metribuzin to glyphosate plus dicamba, 2,4-D ester, halauxifen-methyl, or pyraflufen-ethyl/2,4-D will improve the level and consistency of GR horseweed control. Four trials were conducted over the 2020 and 2021 field seasons in fields with GR horseweed populations. Glyphosate plus dicamba, 2,4-D ester, halauxifen-methyl, or pyraflufen-ethyl/2,4-D controlled GR horseweed 96%, 77%, 71%, and 52%, respectively, at 8 wk after application (WAA). When saflufenacil or metribuzin was added to glyphosate plus dicamba or 2,4-D ester, GR horseweed control was not improved at 8 WAA. When saflufenacil or metribuzin was added to glyphosate plus halauxifen-methyl, GR horseweed control improved by 27% and 25%, respectively, at 8 WAA. When saflufenacil or metribuzin was added to glyphosate plus pyraflufen-ethyl/2,4-D, GR horseweed control was improved by 47% and 37%, respectively, at 8 WAA. The consistency of GR horseweed control was improved when saflufenacil or metribuzin was added to glyphosate plus dicamba, 2,4-D ester, halauxifen-methyl, or pyraflufen-ethyl/2,4-D compared to each herbicide applied alone. Synergism was observed when metribuzin was added to glyphosate plus halauxifen-methyl and when saflufenacil or metribuzin was added to glyphosate plus pyraflufen-ethyl/2,4-D at 8 WAA. Though GR horseweed control was improved with the addition of saflufenacil or metribuzin to glyphosate plus halauxifen-methyl or pyraflufen-ethyl/2,4-D, all treatments including saflufenacil resulted in the highest level and most consistent control.

Recent research reported synergism between glufosinate plus very low rates of protoporphyrinogen oxidase (PPO)–inhibiting herbicides on select broadleaf weeds. Two field studies, each consisting of four trials, were conducted in 2020 and 2021 in commercial fields with glyphosate-resistant (GR) horseweed in Ontario, Canada. Study 1 evaluated GR horseweed control with glufosinate plus five PPO inhibitors at 5% of the label rate; study 2 evaluated what dose of saflufenacil is needed when co-applied with glufosinate to improve GR horseweed control. In study 1, glufosinate plus very low rates of PPO-inhibiting herbicides provided low GR horseweed control. At site 1, despite the synergistic increase in GR horseweed control with saflufenacil (1.25 g ai ha–1) plus glufosinate (300 g ai ha–1), the level of control did not exceed 42% at 2 and 4 wk after application (WAA); the interaction was additive at 8 WAA. The co-application of glufosinate (300 g ai ha–1) with pyraflufen-ethyl (0.34 g ai ha–1), pyraflufen-ethyl/2,4-D (26.4 g ai ha–1), flumioxazin (5.35 g ai ha–1), fomesafen (12 g ai ha–1), or sulfentrazone (7 g ai ha–1) resulted in an additive interaction for GR horseweed control at 2, 4, and 8 WAA. However, glufosinate plus pyraflufen-ethyl or sulfentrazone was antagonistic at 8 WAA. In study 2, similar doses of saflufenacil were required for 50%, 80%, and 95% GR horseweed control whether glufosinate was included in the mixture or not. Interactions between glufosinate (300 g ai ha–1) plus saflufenacil at 1.56, 3.13, 6.25, and 12.5 g ai ha–1 were antagonistic at 2, 4, and 8 WAA at sites 1, 2, and 3; all other interactions were additive. The results of this research indicate there was little to no benefit of adding very low rates of PPO-inhibiting herbicides to glufosinate to improve GR horseweed control under field conditions.

Recent legalization of industrial hemp in the United States has led to increased interest among stakeholders to produce hemp for grain and fiber. However, owing to the lack of herbicides registered for use in hemp, producers are left with limited weed management strategies. Moreover, much of the agricultural land that could be used to cultivate industrial hemp may be prone to carryover of previously applied residual herbicides or physical drift from herbicides sprayed nearby. Industrial hemp sensitivity to herbicides is not well documented. Dose–response studies were conducted under controlled conditions in Madison, WI, screening two industrial hemp grain cultivars for tolerance to 44 preemergence and postemergence herbicides commonly used in corn and soybean. Treatments consisted of herbicides applied at 0×, 0.125×, 0.25×, 0.50×, 0.75×, 1×, 2×, and 4× the recommended maximum labeled rates based on soil type. Preemergence applications were delivered immediately after planting, whereas postemergence applications took place when hemp plants reached 5 to 10 cm in height. Nontreated plants served as the control and were used to estimate percent biomass reduction; dose–response curves were generated. Biomass reduction was >50% for rates under the suggested label rate for 23 preemergence and 21 postemergence herbicides tested. All herbicides tested resulted in >25% biomass reduction at the 0.125× rate, except for clopyralid applied preemergence and postemergence and saflufenacil applied preemergence. This is concerning, as the label rates are determined for effective weed control and the mitigation of herbicide resistance. Overall, these results indicate that industrial hemp is very sensitive to most herbicides tested. Growers should consider herbicide use history and surrounding crops when determining industrial hemp field selection to prevent significant plant injury due to herbicide carryover and drift. Further research into alternative methods of weed control will be vital to establishing hemp as a dominant crop once again.

Laboratory and greenhouse studies were conducted to evaluate the effects of chemical treatments applied to Palmer amaranth seeds or gynoecious plants that retain seeds to determine seed germination and quality. Treatments applied to physiologically mature Palmer amaranth seed included acifluorfen, dicamba, ethephon, flumioxazin, fomesafen, halosulfuron, linuron, metribuzin, oryzalin, pendimethalin, pyroxasulfone, S-metolachlor, saflufenacil, trifluralin, and 2,4-D plus crop oil concentrate applied at 1× and 2× the suggested use rates from the manufacturer. Germination was reduced by 20% when 2,4-D was used, 15% when dicamba was used, and 13% when halosulfuron and pyroxasulfone were used. Use of dicamba, ethephon, halosulfuron, oryzalin, trifluralin, and 2,4-D resulted in decreased seedling length by an average of at least 50%. Due to the observed effect of dicamba, ethephon, halosulfuron, oryzalin, trifluralin, and 2,4-D, these treatments were applied to gynoecious Palmer amaranth inflorescence at the 2× registered application rates to evaluate their effects on progeny seed. Dicamba use resulted in a 24% decrease in seed germination, whereas all other treatment results were similar to those of the control. Crush tests showed that seed viability was greater than 95%, thus dicamba did not have a strong effect on seed viability. No treatments applied to Palmer amaranth inflorescence affected average seedling length; therefore, chemical treatments did not affect the quality of seeds that germinated.

Late-season control of Palmer amaranth in postharvest wheat stubble is important for reducing the seedbank. Our objectives were to evaluate the efficacy of late-season postemergence herbicides for Palmer amaranth control, shoot dry biomass, and seed production in postharvest wheat stubble. Field experiments were conducted at Kansas State University Agricultural Research Center near Hays, KS, during 2019 and 2020 growing seasons. The study site had a natural seedbank of Palmer amaranth. Herbicide treatments were applied 3 wk after wheat harvest when Palmer amaranth plants had reached the inflorescence initiation stage. Palmer amaranth was controlled by 96% to 98% 8 wk after treatment and shoot biomass as well as seed production was prevented when paraquat was applied alone or when mixed with atrazine, metribuzin, flumioxazin, 2,4-D, sulfentrazone, pyroxasulfone + sulfentrazone, or flumioxazin + metribuzin, and with glyphosate + dicamba, glyphosate + 2,4-D, saflufenacil + 2,4-D, glufosinate + dicamba + glyphosate, and glufosinate + 2,4-D + glyphosate. Palmer amaranth was controlled by 89% to 93% with application of glyphosate, glufosinate, dicamba + 2,4-D, saflufenacil + atrazine, and saflufenacil + metribuzin resulting in Palmer amaranth shoot biomass of 15 to 56 g m−2 and production of 1,080 to 7,040 seeds m−2. Palmer amaranth control was less than 86% with application of dicamba, 2,4-D, dicamba + atrazine, and saflufenacil resulting in Palmer amaranth shoot biomass of 38 to 47 g m−2 and production of 3,110 to 6,190 seeds m−2. Palmer amaranth was controlled 63% and 72%, shoot biomass was 178 and 161 g m−2, and seed production was 35,180 and 39,510 seeds m−2, respectively, with application of 2,4-D + bromoxynil + fluroxypyr, and bromoxynil + pyrasulfotole + atrazine. Growers should use these effective postemergence herbicide mixes for Palmer amaranth control to prevent seed prevention postharvest in wheat stubble.

In Mississippi, rice reproduction and ripening often overlaps with soybean maturation, creating potential for herbicide exposure onto rice from desiccants applied to soybeans. Six independent studies were conducted concurrently at the Delta Research and Extension Center in Stoneville, MS, from 2016 to 2018 to determine the response of rice to sublethal concentrations of soybean desiccants during rice reproductive and ripening growth stages. Studies included the desiccants paraquat, glyphosate, saflufenacil, sodium chlorate, paraquat + saflufenacil, and paraquat + sodium chlorate applied at a rate equal to 1/10th of Mississippi recommendations. Treatments were applied at five different rice growth stages, beginning at 50% heading––defined as 0 d after heading (DAH)––with subsequent applications at 1-wk intervals (0, 7, 14, 21, and 28 DAH), up to harvest. Injury was observed 7 d after application (DAA), with five of six desiccants at all application timings. No injury was observed with glyphosate application across all rating intervals. Rough rice grain yield following all glyphosate applications was reduced by >6%. In the studies evaluating paraquat, injury ranged from 5% to 18% at all evaluations, regardless of application timing. Rough rice grain yield was reduced >12% 0 to 21 DAH, following paraquat application. Similar trends were observed with paraquat + saflufenacil and paraquat + sodium chlorate, with rice exhibiting yield decreases >6% following an application 0 to 14 and 0 to 21 DAH, respectively. In studies evaluating saflufenacil and sodium chlorate, rough rice grain yield was >95% of the untreated across all application timings Yield component trends closely resembled reductions observed in rough rice grain yield. Reductions in head rice yield were >5% following applications of paraquat or paraquat + saflufenacil 0 to 14 and 0 to 21 DAH, respectively. Late-season exposure to sublethal concentrations of desiccant from 50% heading (0 DAH) to 28 DAH has an impact on rough rice grain yield, yield components, and head rice yield.

Palmer amaranth is the most problematic and troublesome weed in agronomic cropping systems in the United States. Acetolactate synthase (ALS) inhibitor and glyphosate-resistant (GR) Palmer amaranth has been confirmed in Nebraska and it is widespread in several counties. Soybean resistant to isoxaflutole/glufosinate/glyphosate has been developed that provides additional herbicide site of action for control of herbicide-resistant weeds. The objectives of this study were to evaluate herbicide programs for control of ALS inhibitor/GR Palmer amaranth and their effect on Palmer amaranth density and biomass, as well as soybean injury and yield in isoxaflutole/glufosinate/glyphosate–resistant soybean. Field experiments were conducted in a grower’s field infested with ALS inhibitor and GR Palmer amaranth near Carleton, Nebraska, in 2018 and 2019. Isoxaflutole applied alone or mixed with sulfentrazone/pyroxasulfone, flumioxazin/pyroxasulfone, or imazethapyr/saflufenacil/pyroxasulfone provided similar control (86%–99%) of Palmer amaranth 21 d after PRE (DAPRE). At 14 d after early-POST (DAEPOST), isoxaflutole applied PRE and PRE followed by (fb) POST controlled Palmer amaranth by 10% to 63% compared to 75% to 96% control with glufosinate applied EPOST in both years. A PRE herbicide fb glufosinate controlled Palmer amaranth 80% to 99% 21 d after late-POST (DALPOST) in 2018, and reduced density 89% to 100% in 2018 and 58% to 100% in 2019 at 14 DAEPOST. No soybean injury was observed from any of the herbicide programs tested in this study. Soybean yield in 2019 was relatively higher due to higher precipitation compared with 2018 with generally no differences between herbicide programs. This research indicates that herbicide programs are available for effective control of ALS inhibitor/GR Palmer amaranth in isoxaflutole/glufosinate/glyphosate-resistant soybean.

Four field experiments were completed in commercial corn fields during 2019 and 2020 to determine glyphosate-resistant (GR) horseweed control in corn with tiafenacil alone or in combination with bromoxynil, dicamba, or tolpyralate applied preplant (PP). Corn planted 1 to 10 d after herbicide application was not injured with any of the herbicides tested. GR horseweed interference reduced corn grain yield 32% when left uncontrolled. Herbicides reduced GR horseweed interference and resulted in corn grain yield that was similar to the weed-free control. Glyphosate (900 g ae ha−1) + tiafenacil at 12.5, 25, and 37.5 g ha−1 controlled GR horseweed 63%, 68%, and 72% at 4 wk after treatment (WAT) and decreased GR horseweed density 64%, 43%, and 83% and dry biomass 69%, 55%, and 83%, respectively. Glyphosate + tiafenacil at 12.5, 25, and 37.5 g ha−1 plus bromoxynil (280 g ai ha−1) controlled GR horseweed 81%, 88%, and 87% at 4 WAT and reduced GR horseweed density 82%, 94%, and 93% and dry biomass 93%, 93%, and 98%, respectively. Glyphosate + tiafenacil at 12.5, 25, and 37.5 g ha−1 plus dicamba (300 g ai ha−1) controlled GR horseweed 86%, 88%, and 88% at 4 WAT and decreased GR horseweed density 76%, 89%, and 86% and dry biomass 94%, 98%, and 98%, respectively. Glyphosate + tiafenacil at 12.5, 25, and 37.5 g ha−1 plus tolpyralate (30 g ai ha−1) controlled GR horseweed 90%, 90%, and 91% at 4 WAT and decreased GR horseweed density 93%, 91%, and 95% and dry biomass 98%, 97%, and 97%, respectively. The industry standards in Ontario, glyphosate + dicamba/atrazine and glyphosate + saflufenacil/dimethenamid-p controlled GR horseweed 95% and 100% at 4, 8, and 12 WAT and caused 99% and 100% density or biomass reduction, respectively.

Tiafenacil is a recently developed protoporphyrinogen IX oxidase (PPO)-inhibiting herbicide from the pyrimidinedione chemical class that is proposed for use as a preplant (PP) burndown in soybean. Glyphosate-resistant (GR) horseweed is a troublesome weed often found in no-till systems that can dramatically reduce soybean yield; control in soybean has been variable. Five field experiments were conducted over 2019 and 2020 in commercial soybean fields with GR horseweed to determine the biologically effective dose (BED) of tiafenacil and tiafenacil + metribuzin and to compare their efficacy to currently accepted industry standard herbicide treatments in identity-preserved (IP, non-GMO), GR, and glyphosate/dicamba-resistant (GDR) soybean systems. There was no soybean injury with treatments evaluated. The calculated doses of tiafenacil for 50%, 80%, and 95% control of GR horseweed control were 21, 147, and >200 g ai ha−1, respectively, at 8 wk after application (WAA). Lower doses were calculated with the addition of metribuzin (400 g ai ha−1) to tiafenacil for 50% and 80% control, with no dose of tiafenacil + metribuzin providing 95% control. Tiafenacil + metribuzin at 25 + 400 and 50 + 400 g ai ha−1 controlled GR horseweed 88% and 93%, respectively, which was similar to the industry standards of saflufenacil + metribuzin (25 + 400 g ai ha−1) and glyphosate/dicamba + saflufenacil (1,200/600 + 25 g ai ha−1) that provided 98% and 100% control, respectively, at 8 WAA. This study presents the potential utility of tiafenacil + metribuzin as a GR horseweed management strategy in soybean.

Glyphosate-resistant (GR) Palmer amaranth is one of the most difficult to control weeds in soybean production fields in Nebraska and the United States. An integrated approach is required for effective management of GR Palmer amaranth. Cultural practices such as narrow row spacing might augment herbicide efficacy for management of GR Palmer amaranth. The objectives of this study were to evaluate the effect of row spacing and herbicide programs for management of GR Palmer amaranth in dicamba/glyphosate-resistant (DGR) soybean. Field experiments were conducted in a grower’s field with a uniform population of GR Palmer amaranth near Carleton, Nebraska, in 2018 and 2019. Year-by-herbicide program-by-row spacing interactions were significant for all variables; therefore, data were analyzed by year. Herbicides applied PRE controlled GR Palmer amaranth ≥95% in both years 14 d after PRE (DAPRE). Across soybean row-spacing, most PRE followed by (fb) early-POST (EPOST) herbicide programs provided 84% to 97% control of Palmer amaranth compared with most EPOST fb late-post (LPOST) programs, excluding dicamba in single and sequential applications (82% to 95% control). Mixing microencapsulated acetochlor with a POST herbicide in PRE fb EPOST herbicide programs controlled Palmer amaranth ≥93% 14 d after EPOST and ≥96% 21 d after LPOST with no effect on Palmer amaranth density. Interaction of herbicide program-by-row spacing on Palmer amaranth control was not significant; however, biomass reduction was significant at soybean harvest in 2019. The herbicide programs evaluated in this study caused no soybean injury. Due to drought conditions during a majority of the 2018 growing season, soybean yield in 2018 was reduced compared with 2019.

Amid widespread occurrence of herbicide-resistant weeds in the United States, the use of PRE herbicides and cover crops have resurged once again as important strategies for weed management in cropping systems. The objective of this experiment was to evaluate the length of soil residual weed control from PRE soybean herbicides and the detrimental impact of these herbicides on cover crop species using field treated soil in greenhouse bioassays. Greenhouse bioassays were conducted using soil from field experiments conducted in 2018 and 2019 in Arlington and Lancaster, WI. PRE herbicides consisted of imazethapyr, chlorimuron-ethyl, and cloransulam-methyl (acetolactate synthase [ALS] inhibitors); metribuzin (photosystem II [PS II] inhibitor); sulfentrazone, flumioxazin, and saflufenacil (protoporphyrinogen oxidase [PPO] inhibitors); acetochlor, S-metolachlor, dimethenamid-P, and pyroxasulfone (very long-chain fatty acid [VLCFA] inhibitors); and a nontreated control. Greenhouse bioassays were conducted using soil (depth, 0 to 10 cm) sampled at 0, 10, 20, 30, 40, and 50 d after treatment (DAT). Palmer amaranth and giant foxtail (weeds), and radish and cereal rye (cover crops) were used as bioindicators of herbicide levels in the soil. Bioassay results showed extended soil residual control of Palmer amaranth with sulfentrazone and pyroxasulfone; extended residual control of giant foxtail was observed with pyroxasulfone and S-metolachlor. Chlorimuron-ethyl and metribuzin were the most injurious herbicides to radish and cereal rye shortly after application, respectively, but minimal injury was observed from soil samples collected 50 DAT, indicating the use of PRE and fall-seeded cover crops in southern Wisconsin can be compatible. These results can support growers and practitioners with selection of effective PRE herbicides for Palmer amaranth and giant foxtail control and reduced impact on fall-seeded radish and cereal rye cover crops, altogether leading to more effective, diverse, and sustainable weed management programs.

Hairy fleabane and horseweed are pervasive weed species in agriculture. Glyphosate-resistant (GR) and glyphosate/paraquat–resistant (GPR) biotypes challenge current management strategies. These GR and GPR biotypes have non–target site resistance, which can confer resistance to herbicides with different sites of action (SOAs). This study’s objective was to characterize the response of GR, GPR, and glyphosate/paraquat–susceptible (GPS) biotypes of both weed species to herbicides with a different SOA. Whole-plant dose–response bioassays indicated a similar response among tested biotypes of both weed species to rimsulfuron, dicamba, hexazinone, glufosinate, flumioxazin, saflufenacil, or mesotrione. The hairy fleabane GR and GPR biotypes were 2.7- and 2.9-fold resistant to 2,4-D relative to the GPS biotype (GR50 766.7 g ai ha–1), confirming 2,4-D resistance in hairy fleabane for the first time in California. The GR and GPR biotypes were not cross-resistant to dicamba. No differences in response to 2,4-D were observed among horseweed biotypes with a GR50 ranging from 150.2 to 277.4 g ai ha–1. The GPR biotypes of both species were cross-resistant to diquat, with a 44.0-fold resistance in hairy fleabane (GR50 863.7 g ai ha–1) and 15.6-fold resistance in horseweed (GR50 563.1 g ai ha–1). The confirmation of multiple resistances to glyphosate, paraquat, and 2,4-D in hairy fleabane curtails herbicide SOA alternatives and jeopardizes resistance management strategies based on herbicide rotation and tank mixtures, underscoring the critical need for nonchemical weed control alternatives.