Additive manufacturing (AM) has made long strides in the recent past and rapidly evolved into a promising alternative in specific applications. The aircraft industry is not an exception to this. The true just-intime production possibility is critical for the aircraft maintenance industries, though the lack of material freedom is a major hurdle. Several fire-retardant materials were investigated for AM in the aerospace context, but mainly for fused deposition modeling (FDM). The material consolidation constraints in FDM led to the expansion to the use of selective laser sintering (SLS) to some extent. Nevertheless, the material options are still limited, proprietary, and lack scientific insights into the material consolidation mechanics. Attempts are made in this paper to fill this gap, evaluating a new fire-retardant material for processing by SLS. Experiments conducted to ascertain the material, process, structure, and consolidation relationships indicated energy density levels 0.062–0.070 J/mm2 with laser power 13 W and scan speed varied slightly around 390 mm/s to give the best laser sintering and mechanical property results in polyetherimide powders.

FeCrAl alloys are among the best and most mature accident tolerant fuel cladding candidates produced to date, due to their superior combination of mechanical properties and stability at elevated temperatures. For fuel cladding applications, these materials are drawn into tubes with plugs welded to the ends. The mechanical properties of such welds and the impact on cladding performance have not been fully investigated. A novel mesoscale mechanical test and a variety of microscale tests were performed to evaluate a range of properties including nanoindentation hardness, compression and shear yield strengths, and tensile strengths and elongations. Micromechanical testing generally matched the trends of the larger mesoscale testing, with nanoindentation reproducing the trend the best, although some discrepancies existed in regions with low dislocation content. Mesoscale tensile testing showed good correlation with macroscale tests and revealed that the plug heat-affected zone possessed the lowest strength and ductility. This indicated that failure would occur first in or near this region.

Flagellar dyneins are the molecular motors responsible for producing the propagating bending motions of cilia and flagella. They are located within a densely packed and highly organised super-macromolecular cytoskeletal structure known as the axoneme. Using the mesoscale simulation technique Fluctuating Finite Element Analysis (FFEA), which represents proteins as viscoelastic continuum objects subject to explicit thermal noise, we have quantified the constraints on the range of molecular conformations that can be explored by dynein-c within the crowded architecture of the axoneme. We subsequently assess the influence of crowding on the 3D exploration of microtubule-binding sites, and specifically on the axial step length. Our calculations combine experimental information on the shape, flexibility and environment of dynein-c from three distinct sources; negative stain electron microscopy, cryo-electron microscopy (cryo-EM) and cryo-electron tomography (cryo-ET). Our FFEA simulations show that the super-macromolecular organisation of multiple protein complexes into higher-order structures can have a significant influence on the effective flexibility of the individual molecular components, and may, therefore, play an important role in the physical mechanisms underlying their biological function.

Diatoms are unicellular photosynthetic algae that autonomously fabricate a porous organized biosilica shell refined in billion years of evolution. They represent an inexhaustible source of low cost, biocompatible mesoporous silica. Despite the major advances in the genomic field, studies on diatom cell biology are still hampered by a lack of cellular tools. In particular, cell staining assays of diatoms viability are still limited or not well performant. Here we provide a phosphorescent organometallic iridium complex (Ir-Fcx) suitable to act as staining agent to detect diatoms viability.

Several technologically important alloys like Al-Li-Zr, Al-Li-Sc, Al-Sc-Zr, Al-Li-Sc-Zr, modified Inconel etc., exhibit compact precipitates in their microstructure. We present a phase-field model in two dimensions to study the morphological evolution of composite precipitates in ternary alloys. The model employs a modified regular solution description of the bulk free energy of the disordered matrix phase and ordered precipitates. Elastic strain energy of the three-phase system is described using Khachaturyan’s microelasticity theory. The temporal evolution of the spatially dependent field variables is determined by numerically solving coupled Cahn-Hilliard and Allen-Cahn equations for composition and order parameter fields, respectively. We systematically vary the misfit strains, alloy chemistry and mobilities of the diffusing species to study their effect on the development of compact precipitates. Compact core-shell morphology destabilizes when the precipitate phases have misfit strains of opposite signs with the matrix phase although the relative interfacial energies between the phases satisfy Cahn’s spontaneous wetting condition. Thus, the stability of “monodisperse” core-shell microstructures is determined by the interplay between the relative interfacial energies and elastic interactions between the phases. Further, our simulations show that low solute mobility within the core leads to sluggish coarsening of the compact particles.

Mesoporous silicas were synthesized via a surfactant-templated sol-gel route using castor oil as the templating agent under acidic medium. The resulting silicas were subsequently amine functionalized with 3-aminopropyltriethoxysilane (NH2-MTS), [3-(2-aminoethylamino)-propyl]trimethoxysilane (NN-MTS), and [3-(diethylamino)propyl]trimethoxysilane(DN-MTS) to introduce surface basicity. Surface physicochemical properties were characterized by field emission gun scanning electron microscopy (FEGSEM), nitrogen porosimetry, X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and diffuse reflectance infrared fourier transform spectroscopy (DRIFTS). As-synthesised materials exhibit type IV adsorption-desorption isotherms characteristic of mesoporous structures. Clusters of spherical shaped materials were observed by FEGSEM, suggesting growth of silica occurs within colloidal dispersions. High-resolution N 1s XP spectra and DRIFT spectra confirmed the presence of amine groups in the organo-amine functionalised mesoporous silicas. The amine functionalised mesoporous silicas were active for the transesterification of tributyrin with methanol, with conversion found to increase from NH2-MTS< NN-MTS< DN-MTS.

Tumor tissue has different acidity compared to normal tissue. Localized drug delivery that release chemotherapeutic medications upon stimulation via pH changes is a promising strategy in cancer therapy for adjuvant therapies after surgical resection to reduce the risk of local recurrence. In this study, a mesoporous nanofibrous system with acidic pH-triggered “caps” has been for the first time developed for localized on-demand drug release to target tumor cells, without biological damage to normal cells while maintaining their structural integrity to support future tissue regeneration. Specifically, polyacrylic acid (PAA) was grafted on electrospun mesoporous silica nanofibers (MSFs) and the obtained PAA-MSFs allowed efficient drug loading at neural pH and on-demand releasing at acidic cancer subcellular compartments, based on pH-dependent electrostatic interactions associated with protonation/deprotonation of PAA. The The hybrid mesoporous nanofibers a low cytotoxicity to normal cells and a high killing efficiency to cancer cells. The system demonstrated a great potential as tumor targeting drug delivery system.

Oxygen isotope stage 3 (OIS 3) climate and its variations are the focus of the Stage 3 Project. The objective of the OIS 3 modeling effort is twofold: (1) to explore the importance of different boundary conditions on the climate of Europe and (2) to develop climate simulations that best reproduce the wealth of OIS 3 observations. Given the complexity of the topography and coastlines, the modeling effort is based on a “nested” General Circulation Model (GCM) and mesoscale model (RegCM2) with climate simulations for Europe on a 60-km grid spacing. The key conclusions are as follows: (1) The mesoscale model, driven by GCM output, does a reasonable job of reproducing the modern European climate. (2) OIS 3 variations in orbit, CO2, and ice-sheet size are of little significance in explaining the observed climate variability. (3) The model results focus attention on North Atlantic sea-surface temperatures (SST) as a major factor in explaining OIS 3 climates. (4) Experiments for different SST values capture a number of systematic changes in sea-level pressure and precipitation. (5) Climate models simulate substantial European cooling and significant changes in precipitation, but they do not explain large differences between OIS 3 warm and cold episodes.

This study describes SNOW-WEB, a distributed system of atmospheric sensors, which is cost-effective and can be efficiently deployed in Antarctica. The system supports traditional atmospheric sensors and has built-in redundancy as many units can be deployed in a relatively small area for a similar cost to one conventional weather station. Furthermore, each unit is equipped with wireless mesh-networking capabilities and so is able to share information with those units in its direct vicinity. This allows for the ferrying of collected information to a manned observation station and hence the ability to monitor data in real-time. GPS hardware installed on each unit also allows for high-resolution glacier or ice shelf tracking. As a testing study, eighteen such weather stations were deployed in the vicinity of Scott Base, Ross Island, Antarctica over the 2011/12 summer season. This paper reports on the successful development and deployment of the system, results from the testing period and challenges encountered during the experiment. Collected data is validated against automatic weather stations already operating in the region and an intercomparison is performed between SNOW-WEB data and forecast output from the Antarctic Mesoscale Prediction System. A high degree of agreement is found between data sources. We conclude that SNOW-WEB data is suitable for use in studies of mesoscale meteorology.

Understanding how wood decomposition varies spatially at the mesoscale (between 1-ha plots) may improve carbon flux estimates in Amazonian forests. An experiment was carried out to test the influence of soil, slope, above-ground tree live biomass (biomass), fine-litter mass and characteristics of neighbouring trees on the variation of wood decomposition between 1-ha plots in four species of tropical trees that vary in wood density (Manilkara huberi – 0.86 g cm−3, Couratari guianensis – 0.54 g cm−3, Hura crepitans – 0.32 g cm−3 and Parkia pendula – 0.29 g cm−3). A wood sample from each species (30 × 5 × 2.5 cm) was placed in each of 71 plots within 64 km2 of terra firme tropical moist forest in Reserva Florestal Adolpho Ducke. One year later, samples were collected and weighed. The effects of specificity of decomposers was measured by the association of decomposition with the wood density and with the taxonomic group of the nearest tree with dbh ≥30 cm. Wood decomposition was independent of soil (texture and nutrients), slope, biomass and fine-litter mass at the mesoscale, except for C. guianensis, which showed greater decomposition in locations with greater biomass. Decomposition was also independent of wood density and taxonomic group of nearby large trees. In general, none of the variables was useful as a predictor of wood decomposition at the scale larger than 1 ha. Thus, the use of models that include soil and topography to improve estimates of carbon flux are limited because wood decomposition does not follow similar mesoscale patterns to that of biomass and fine-litter decomposition. Also, the results indicate that wood decomposition is more likely to be associated with generalist decomposers than with specialists associated with neighbouring trees.

The study area for this work includes all the southern edge of the Bay of Biscay, from the north-west Iberian Peninsula to the southern half of the French shelf. The principal aim of this article is to provide a complete overview of the physical oceanography of the area, mainly in its mesoscale aspects, of which there are few published studies, and the implications for early fish life history stages. The results showed the existence of two space and temporal scales for most of the physical processes that occur in the Bay of Biscay, a macroscale for seasonal time periods and a meso and submesoscale for the periods between seasons. The importance of local phenomena, such as upwelling or the variability of the Poleward Current, was observed. The interaction of both scales on these physical processes is discussed and the need for sampling at the submesoscale level to determine the distribution of ichthyoplankton is considered. Moreover, the mesoscale physical oceanography study is essential to improve the knowledge of interactions between strategies and environmental conditions that result in a significant mortality reduction in fish early stages.

Self-assembly—the spontaneous generation of order in systems of components—is ubiquitous in chemistry; in biology, it generates much of the functionality of the living cell. Self-assembly is relatively unused in microfabrication, although it offers opportunities to simplify processes, lower costs, develop new processes, use components too small to be manipulated robotically, integrate components made using incompatible technologies, and generate structures in three dimensions and on curved surfaces. The major limitations to the self-assembly of micrometer- to millimeter-sized components (mesoscale self-assembly) do not seem to be intrinsic, but rather operational: selfassembly can, in fact, be reliable and insensitive to small process variations, but fabricating the small, complex, functional components that future applications may require will necessitate the development of new methodologies. Proof-of-concept experiments in mesoscale self-assembly demonstrate that this technique poses fascinating scientific and technical challenges and offers the potential to provide access to hard-to-fabricate structures.