To characterize the evolution of dioctahedral interstratified clay minerals in the Golden Cross epithermal deposit, New Zealand, hydrothermally altered volcanic rocks containing the sequence smectite through illite-smectite (I-S) to muscovite were examined by optical microscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission and analytical electron microscopies (TEM/AEM).

XRD analyses of 30 oriented clay samples show a broad deposit-wide trend of increasing illite content in I-S with increasing depth and proximity to the central vein system. Six representative samples were selected for SEM/TEM study on the basis of petrographic observations and XRD estimates of I-S interstratification. Ca and Na are the dominant interlayer cations in smectite, but as the proportion of illite layers in I-S increases, so does the K content and (IVAl + VIAl)/Si ratio. Layers and packets tend to flatten and form larger arrays, reducing the amount of pore space. Smectite coexists with (R = 1) I-S, rather than being (R = 0) I-S where R is the Reichweite parameter. The highest alteration rank samples contain discrete packets of mica to ∼300 Å thick, but a limited chemical and structural gap exists between illite, which is intermediate in composition between common illite and muscovite, and illite-rich I-S. Selected-area electron diffraction (SAED) patterns of mica show that the 1M polytype dominates, rather than the common 2M1 polytype.

Petrographic, SEM, and TEM data imply that all phyllosilicates formed via neoformation directly from fluids. Relatively mature I-S and micas form simultaneously, without progressing through the series of transformations that are commonly assumed to characterize diagenetic sequences during burial metamorphism in mud-dominated basins. Although the overall distribution of clay minerals is consistent with temperature as a controlling variable, local heterogeneities in the distribution of clay minerals were controlled by water/rock ratio, which varied widely owing to different rock types and fracture control.

Phyllosilicate mineralogy is key to understanding hydrothermal processes within accepted epithermal deposit models but little information has been published about the mineral chemistry of epithermal deposits. X-ray diffraction, optical and electronic microscopy (scanning and transmitted), electron microprobe, and Fourier transform infrared spectroscopy were used in this work to study phyllosilicates in the Palai-Islica Au-Cu epithermal, volcanic-hosted deposit, in order to link phyllosilicate mineralogy and mineral chemistry to ore genesis. Different phyllosilicate assemblages are characteristic of two types of mineralization, and related hydrothermal alteration. Chlorite and mica appear in polymetallic quartz veins with sulfides, and in the related chloritic and sericitic hydrothermal alteration. These minerals have notable textural and chemical differences (i.e. Fe/(Fe+Mg), Si and Al in chlorite and illitic and phengitic components in mica) amongst veins and altered rocks, revealing different genetic conditions. These chemical features also distinguish propylitic and regional, non ore-related, low-temperature alteration. Hot hydrothermal fluids of near-neutral pH are responsible for vein mineralization and alteration. Illite, interstratified illite-smectite, kaolinite, and pyrophyllite are characteristic, with a distribution pattern by zones, of the intermediate argillic and advanced argillic alteration around areas of silicification. In the latter, native gold appears associated with interstratified illite-smectite, suggesting a relatively low-temperature formation. Hot, low-pH fluids are responsible for this mineralization and alteration assemblage. The present study contributes to epithermal models showing the co-existence of two different alteration styles in the same hydrothermal system.

Kurilite, with the simplified formula, Ag8Te3Se, is a new mineral from the Prasolovskoe epithermal Au-Ag deposit, Kunashir Island, Kuril arc, Russian Federation. It occurs as aggregates up to 2 mm in size, composed of brittle xenomorphic grains, up to several μm in size, in quartz, associated with tetrahedrite, hessite, sylvanite and petzite. Kurilite is opaque, grey, with a metallic lustre and a black streak. Under plane-polarized light, kurilite is white with no observed bireflectance, cleavage, or parting observed. Under crossed polars it appears isotropic without internal reflections. Reflectance values in air and in oil, are tabulated. It has a mean VHN (25 g load) of 99.9 kg/mm2 which equates roughly to a Mohs hardness of 3. Electron microprobe analyses yield a mean composition of Ag 63.71, Au 0.29, Te 29.48, Se 5.04, S 0.07, total 98.71 wt.%. The empirical formula (based on 12 atoms) is (Ag7.97Au0.02)Σ7.99Te3.00(Se0.86Te0.12S0.03)Σ1.01. The calculated density is 7.799 g/cm3 (based on the empirical formula and unit-cell parameters refined from single-crystal data). Kurilite is rhombohedral, R3 or , a 15.80(1), c 19.57(6) Å, V 4231(12)Å3, c:a 1.2386, Z = 15. Its crystal structure remains unsolved. The seven strongest lines of the X-ray powder-diffraction pattern [d in Å (I)(hkl)] are: 3.727(20)(131), 2.996(50)(232), 2.510(30)(226,422), 2.201(100)(128,416,342), 2.152(20)(603), 2.079(30)(253), 2.046(20)(336,434). The mineral is named after the locality.

The Silbergrube Aplite (SA) in the Hagendorf-Pleystein Pegmatite District, near Waidhaus, Germany, is a mildly peraluminous NW-SE directed leucogranite dyke. It occurs in association with quartz dykes and aplitic metamorphic mobilizates in the NE Bavarian crystalline basement. The SA differs from other aplitic mobilizates in the region in having a less well developed strain-related mineral orientation and in containing only minor amounts of garnet and tourmaline. The aplitic metamorphic mobilizates and the SA are chemically and mmeralogically almost identical and yield the same age of formation of ∼302 Ma (stage I). The age of formation of the Hagendorf pegmatites seemingly post-dates the emplacement of the SA. The SA was emplaced at the boundary between fine-grained biotite granites and metamorphic country rocks within a zone of structural weakness, favouring the formation of disseminated late magmatic to hydrothermal mineralization of Li-bearing Fe-Mn phosphates (stages II and III). Brittle deformation along this zone was conducive to the faultbound Fe-Mn-Ca phosphates. Mineral telescoping is evident from the presence of Fe2+, Fe3+ and Mn2+ phosphates in fissures and vugs in a texturally highly variable host-rock environment (stage IV). This intimate intergrowth of phosphate minerals reflects contrasting physical and chemical conditions prevailing in a near-surface/ shallow epithermal S-deficient phosphate system (stage IV), similar to what is known from Cu-Au epithermal systems. The most recent mineral assemblages that formed under predominantly oxidizing conditions are correlated with the subtropical weathering during the Neogene which resulted in the formation of a peneplain truncating the SA and its country rocks (stage V). The SA is the root zone of the felsic aplitic-pegmatitic mobilizates in this region and is overprinted by an epithermal phosphate system.

We present an initial report of a well-preserved and relatively diverse Gondwanan plant assemblage from Bahía Laura Group, Chon Aike Formation strata of the Estancia Flecha Negra area, central-western region of the Deseado Massif, Santa Cruz province, Patagonia, Argentina. The locality contains the first richly fossiliferous chert with a diverse and well-preserved plant assemblage reported from the Mesozoic which is demonstrably associated with hot spring activity. A compression flora and petrified forest contained in associated clastic and volcaniclastic environments provide an indication of regional plant diversity during this as yet poorly represented stratigraphic interval.

The Windyfield chert site is located 700 m NE of the original Rhynie chert locality at Rhynie, Aberdeenshire, Scotland. Originally identified by concentrations of surface float material, a drilling and trenching programme of the area in 1997 revealed a chert ‘pod’ in situ interbedded with fluvial/lacustrine sandstones and hydrothermally altered shales. Chert morphologies identified from float blocks and trench material range from tabular beds to lenticular pods displaying massive, nodular, laminated and brecciated fabrics, and geyserite splash textures. A suite of floral and faunal associations, when combined with distinctive macro- and microscopic chert textures, has been used to interpret depositional conditions. Palaeoenvironments ranged from terrestrial laminated, brecciated and vegetated sinter sheets to low-temperature pools and marginal aquatic settings. The flora comprises six higher land plant species, nematophytes, charophytes, various fungi and probable cyanobacteria. Arthropods include branchiopod crustaceans, a euthycarcinoid, trigonotarbid arachnids, centipedes, eoarthropleurids and a possible hexapod. The biota of the Windyfield chert is closely comparable to that found in the Rhynie chert. Together, the Windyfield and Rhynie cherts contain the most diverse associated fossil arthropod fauna of terrestrial and freshwater origin from rocks of comparable age anywhere in the world.

The Lower Devonian plant- and arthropod-bearing cherts of the Rhynie area of Aberdeenshire, NE Scotland, were deposited from silica-rich waters emanating from the hot-springs of a precious-metal (Au) bearing epithermal system. Cherts were deposited at temperatures up to 100°C. The hot-springs were active in the waning phase of local volcanism and reworked volcanic debris is associated with the hot-spring system. Plant and animal communities inhabited a low energy alluvial plain with small ponds. Hot-springs deposited surficial sinter and silicified standing plants and underlying plant litter in a generally terrestrial setting, but aquatic organisms were present in low temperature pools within areas of sinter deposition. Silicification also affected plants and sediment in the shallow subsurface. The cherts display massive, vuggy, laminated, lenticular, nodular and brecciated textures in laterally impersistent beds. Faunal and floral variation between beds is of local significance, possibly reflecting general water availability. Variations in preservation of plants reflect not only degrees of imperfection in the permineralisation process, but also silicification at different times in the cycle of plant growth and decay.