Sets of replicate hydraulic conductivity tests were conducted using 100 mM KCl and 20 and 40 mM CaCl2 solutions to evaluate how changes in hydraulic conductivity are related to changes in the exchange complex and physical properties (water content and free swell) of prehydrated and non-prehydrated bentonite used for geosynthetic clay liners (GCLs). Essentially no change in hydraulic conductivity and water content (or void ratio) occurred during tests with the 100 mM KCl solution even though K+ was replacing Na+ on the exchange complex. In contrast, for the CaCl2 solutions (20 mM and 40 mM), the hydraulic conductivity increased and the free swell and water content decreased as exchange of Ca2+ for Na+ occurred. Faster changes in hydraulic conductivity and the exchange complex occurred in the tests with the 40 mM CaCl2 solution and the non-prehydrated bentonite (i.e. the hydraulic conductivity changed more rapidly when exchange occurred more rapidly). Even though exchange of Ca2+ for Na+ was essentially complete at the end of testing, the hydraulic conductivity obtained with the 20 mM CaCl2 solution was less and the water content greater than obtained with the 40 mM CaCl2 solution (2.6 × 10−8 cm/s vs. 6.7 × 10−8 cm/s, 122% vs. 111%, and 3.2 vs. 2.9). Similarly, the prehydrated bentonite had lower hydraulic conductivity (1.9 × 10−8 cm/s vs. 6.7 × 10−8 cm/s) and greater water content (167% vs. 111%) than the non-prehydrated bentonite at the end of testing, even though Ca-for-Na exchange was essentially complete.

Bipolar-membrane electroacidification (BMEA) technology, which uses the property of bipolar membranes to split water and the demineralization action of cation-exchange membranes (CEM), was tested for the production of acid casein. BMEA has numerous advantages in comparison with conventional isoelectric precipitation processes of proteins used in the dairy industry. BMEA uses electricity to generate the desired ionic species to acidify the treated solutions. The process can be precisely controlled, as electro-acidification rate is regulated by the effective current density in the cell. Water dissociation at the bipolar membrane interface is continuous and avoids local excess of acid. In-situ generation of dangerous chemicals (acids and bases) reduces the risks associated with the handling, transportation, use and elimination of these products. The aim of this study was to evaluate the performance of BMEA in different conditions of added ionic strength (μadded = 0, 0·25, 0·5 and 1·0 M) and added salt (CaCl2, NaCl and KCl).The combination of KCl and μadded = 0·5 M gave the best results with a 45% decrease in energy consumption. The increased energy efficiency was the result of a decrease in the anode/cathode voltage difference. This was due to an increase of conductivity, produced by addition of salt, necessary to compensate for the lack of sufficiently mobile ions in the skim milk. However, the addition of salts, irrespective of type or ionic strength, increased the required operation time. The protein profile of isolates were similar under all experimental conditions, except at 1·0 M-CaCl2.