Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-13T09:20:19.599Z Has data issue: false hasContentIssue false

A rigidity result for the product of spheres

Published online by Cambridge University Press:  13 December 2023

Pak Tung Ho*
Affiliation:
Department of Mathematics, Tamkang University, Tamsui, New Taipei City 251301, Taiwan
Rights & Permissions [Opens in a new window]

Abstract

In this paper, we prove a rigidity result for the product metric on the product of spheres $S^1\times S^{n-1}$.

Type
Article
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - SA
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-ShareAlike licence (https://creativecommons.org/licenses/by-nc-sa/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the same Creative Commons licence is included and the original work is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use.
Copyright
© The Author(s), 2023. Published by Cambridge University Press on behalf of Canadian Mathematical Society

1 Introduction

Throughout this paper, we assume $n\geq 3$ . Let $g_{S^n}$ be the standard metric on the n-dimensional unit sphere $S^n$ . Answering a question of Gromov [Reference Gromov5], Llarull [Reference Llarull11] proved the following:

Theorem 1.1 (Theorem A in [Reference Llarull11])

Suppose g is a Riemannian metric on $S^n$ such that its scalar curvature $R_g\geq n(n-1)=R_{g_{S^n}}$ and $g\geq g_{S^n}$ . Then we must have $g=g_{S^n}$ .

In the even-dimensional case, Listing [Reference Listing9] was able to generalize Theorem 1.1 as follows:

Theorem 1.2 Let $n\geq 4$ be an even integer. Moreover, suppose that g is a Riemannian metric on $S^n$ satisfying $R_g\geq (n -1) tr_g(g_{S^n})$ at each point on $S^n$ . Then g is a constant multiple of $g_{S^n}$ .

Later, rigidity results related to the scalar curvature, including compact symmetric spaces, have been obtain by other authors in [Reference Goette and Semmelmann3, Reference Goette and Semmelmann4, Reference Llarull10, Reference Min-Oo12]. For more rigidity results involving scalar curvature, we refer the readers to the survey [Reference Brendle1].

For any $c>0$ , let $g_c$ be the product metric given by $g_c=c\,ds^2+g_{S^{n-1}}$ on the product of spheres $S^1\times S^{n-1}$ . In this paper, we prove the following:

Theorem 1.3 Suppose g is a Riemannian metric on $S^1\times S^{n-1}$ such that:

(i) its scalar curvature $R_g\geq (n-1)(n-2)=R_{g_c}$ ,

(ii) $g\geq g_c$ , and

(iii) its Ricci curvature $Ric_g\geq 0$ .

Then g is isometric to $g_{\tilde {c}}$ for some $\tilde {c}\geq c$ .

Compared to that of Theorems 1.1 and 1.2, the assumption of Ricci curvature in Theorem 1.3 may seem to be strong. But we remark that lower bound on the Ricci curvature is assumed when rigidity result of symmetric space is studied. See Theorem 0.2 in [Reference Goette and Semmelmann3].

In Section 2, we prove a conformal version of Theorem 1.3. See Corollary 2.2 for the precise statement. Note that the similar idea can be used to prove rigidity results for manifolds with boundary and for CR manifolds within a fixed conformal class. See Propositions 2.3 and 2.5.

In Section 3, we prove Theorem 1.3. We then provide examples showing that neither assumption (i) nor assumption (ii) could be dropped in Theorem 1.3. This leaves us the question whether assumption (iii) on Ricci curvature could be dropped in Theorem 1.3. While we are not able to answer it, we are able to prove a rigidity result of warped product metric without any assumption on Ricci curvature. See Theorem 3.1 for the precise statement.

2 A conformal version

As a warm-up, we will prove in this section a conformal version of Theorem 1.3. We first prove the following more general proposition.

Proposition 2.1. Suppose $(M,\tilde {g})$ is a closed (i.e., compact without boundary) Riemannian manifold such that its scalar curvature satisfies $R_{\tilde {g}}\geq 0$ and $R_{\tilde {g}}\not \equiv 0$ . If g is conformal to $\tilde {g}$ such that $g\geq \tilde {g}$ and $R_g\geq R_{\tilde {g}}$ , then $g=\tilde {g}$ .

Proof Since g is conformal to $\tilde {g}$ , we can write $g=u^{\frac {4}{n-2}}\tilde {g}$ for some $0<u\in C^\infty (M)$ . By the assumption that $g\geq \tilde {g}$ , we have

(2.1) $$ \begin{align} u\geq 1. \end{align} $$

Moreover, since $g=u^{\frac {4}{n-2}}\tilde {g}$ , it is well known that

(2.2) $$ \begin{align} -\frac{4(n-1)}{n-2}\Delta_{\tilde{g}} u+R_{\tilde{g}} u=R_gu^{\frac{n+2}{n-2}}. \end{align} $$

By (2.2) and the assumption that $R_g\geq R_{\tilde {g}}$ , we find

(2.3) $$ \begin{align} \nonumber -\frac{4(n-1)}{n-2}\Delta_{\tilde{g}} u &=R_gu^{\frac{n+2}{n-2}}-R_{\tilde{g}} u \\ &\geq R_{\tilde{g}}u^{\frac{n+2}{n-2}}-R_{\tilde{g}} u =R_{\tilde{g}}u^{\frac{4}{n-2}}(u-1). \end{align} $$

It follows from (2.1) and the assumption that $R_{\tilde {g}}\geq 0$ that the last term in (2.3) is nonnegative, which gives $\Delta _{\tilde {g}} u\leq 0$ in M. Since M is compact, we must have

$$ \begin{align*}u\equiv c\end{align*} $$

for some constant c. On one hand, it follows from (2.1) that $c\geq 1$ . On the other hand, by (2.2) and the assumption that $R_g\geq R_{\tilde {g}}$ , we deduce

$$ \begin{align*}R_g=R_{\tilde{g}}c^{-\frac{4}{n-2}}\geq R_{\tilde{g}}.\end{align*} $$

Since $R_{\tilde {g}}\geq 0$ and $R_{\tilde {g}}\not \equiv 0$ , we have $c\leq 1$ . That is to say, we have $c=1$ and $u\equiv 1$ , or equivalently, $g=\tilde {g}$ , as claimed.

For the product metric $g_c=c\,ds^2+g_{S^{n-1}}$ on the product of spheres $S^1\times S^{n-1}$ , the scalar curvature of $g_c$ is equal to $(n-1)(n-2)$ . Therefore, we can apply Proposition 2.1 with $(M,\tilde {g})=(S^1\times S^{n-1}, g_c)$ to get the following corollary, which is a conformal version of Theorem 1.3.

Corollary 2.2. If g is a metric on $S^1{\kern-1pt}\times{\kern-1pt} S^{n-1}$ conformal to $g_c$ such that $R_g{\kern-1pt}\geq{\kern-1pt} R_{g_c}{\kern-1pt}={\kern-1pt}(n-1) (n-2)$ and $g\geq g_c$ , then $g=g_c$ .

Note that there is no assumption on the Ricci curvature in Corollary 2.2. The idea of the proof of Proposition 2.1 can be used to prove the following:

Proposition 2.3. Suppose $(M,\tilde {g})$ is a compact Riemannian manifold with boundary $\partial M$ such that its scalar curvature satisfies $R_{\tilde {g}}\geq 0$ and $R_{\tilde {g}}\not \equiv 0$ in M and its mean curvature satisfies $H_{\tilde {g}}=0$ on $\partial M$ . If g is conformal to $\tilde {g}$ such that $g\geq \tilde {g}$ , $R_g\geq R_{\tilde {g}}$ in M, and $H_g=0$ on $\partial M$ , then $g=\tilde {g}$ .

Proof Since the proof is very similar to Proposition 2.1, we only sketch it. If we write $g=u^{\frac {4}{n-2}}\tilde {g}$ for some $0<u\in C^\infty (M)$ , we still have (2.1). Since $g=u^{\frac {4}{n-2}}\tilde {g}$ , we have (see, for example, [Reference Escobar2])

(2.4) $$ \begin{align} \nonumber -\frac{4(n-1)}{n-2}\Delta_{\tilde{g}} u+R_{\tilde{g}} u&=R_gu^{\frac{n+2}{n-2}}~~\text{ in }M, \\ \frac{2(n-1)}{n-2}\frac{\partial u}{\partial\nu_{\tilde{g}}}+H_{\tilde{g}} u&=H_g u^{\frac{n}{n-2}}~~\text{ on }\partial M. \end{align} $$

It follows from the second equation in (2.4) and the assumption that $H_g=H_{\tilde {g}}=0$ that

(2.5) $$ \begin{align} \frac{\partial u}{\partial\nu_{\tilde{g}}}=0~~\text{ on }\partial M. \end{align} $$

Following the proof of Proposition 2.1, we can conclude that

$$ \begin{align*}\Delta_{\tilde{g}}u\leq 0~~\text{ in }M.\end{align*} $$

Combining this with (2.5), we can conclude that $u\equiv c$ for some constant c. As in the proof of Proposition 2.1, we can then conclude that $u\equiv 1$ , or equivalently, $g=\tilde {g}$ .

Let $(M,g_0)$ be a closed (i.e., compact without boundary) n-dimensional Riemannian manifold such that its scalar curvature $R_{g_0}\geq 0$ and $R_{g_0}\not \equiv 0$ . Then $[0,1]\times M$ is a compact $(n+1)$ -dimensional manifold with boundary $(\{0\}\times M)\cup (\{1\}\times M)$ . Equipped with the product metric $ds^2+g_0$ , $[0,1]\times M$ has scalar curvature being equal to $R_{g_0}$ and has vanishing mean curvature. Therefore, we can apply Proposition 2.3 to get the following:

Corollary 2.4. Let $(M,g_0)$ be a closed (i.e., compact without boundary) n-dimensional Riemannian manifold such that its scalar curvature $R_{g_0}\geq 0$ and $R_{g_0}\not \equiv 0$ . If g is a metric on $[0,1]\times M$ conformal to $\tilde {g}=ds^2+g_0$ such that $g\geq \tilde {g}$ , $R_g\geq R_{\tilde {g}}$ in M, and $H_g=0$ on $\partial M$ , then $g=\tilde {g}$ .

Similarly, one can prove the following CR version of Proposition 2.1. Basic facts about CR manifolds could be found in [Reference Jerison and Lee7] for example.

Proposition 2.5. Suppose that $(M,\tilde {\theta })$ is a compact strictly pseudoconvex CR manifold of real dimension $2N+1$ with a given contact form $\tilde {\theta }$ such that its Webster scalar curvature satisfies $R_{\tilde {\theta }}\geq 0$ and $R_{\tilde {\theta }}\not \equiv 0$ . If $\theta $ is conformal to $\tilde {\theta }$ such that $\theta \geq \tilde {\theta }$ and $R_\theta \geq R_{\tilde {\theta }}$ , then $\theta =\tilde {\theta }$ .

Proof Since $\theta $ is conformal to $\tilde {\theta }$ , we can write $\theta =u^{\frac {2}{N}}\tilde {\theta }$ for some $0<u\in C^\infty (M)$ . We then have

(2.6) $$ \begin{align} u\geq 1, \end{align} $$

since $\theta \geq \tilde {\theta }$ by assumption. Since $\theta =u^{\frac {2}{N}}\tilde {\theta }$ , we have (cf. [Reference Jerison and Lee7])

(2.7) $$ \begin{align} -\left(2+\frac{2}{N}\right)\Delta_{\tilde{\theta}}u+R_{\tilde{\theta}}u =R_\theta u^{1+\frac{2}{N}}, \end{align} $$

where $\Delta _{\tilde {\theta }}$ is the sub-Laplacian of $\tilde {\theta }$ . Using (2.7) and the assumption that $R_\theta \geq R_{\tilde {\theta }}$ , we deduce

(2.8) $$ \begin{align} \nonumber -\left(2+\frac{2}{N}\right)\Delta_{\tilde{\theta}}u &=R_\theta u^{1+\frac{2}{N}}-R_{\tilde{\theta}}u \\ &\geq R_{\tilde{\theta}}u^{1+\frac{2}{N}}-R_{\tilde{\theta}}u = R_{\tilde{\theta}}u^{\frac{2}{N}}(u-1). \end{align} $$

From (2.7) and the assumption that $R_{\tilde {\theta }}\geq 0$ , we can see that the last term in (2.8) is nonnegative, which implies that $\Delta _{\tilde {\theta }}u\leq 0$ . Since M is compact, we have

$$ \begin{align*}u\equiv c\end{align*} $$

for some constant c. Note that $c\geq 1$ by (2.6). Note also that

$$ \begin{align*}R_\theta=R_{\tilde{\theta}}c^{-\frac{2}{N}}\geq R_{\tilde{\theta}}\end{align*} $$

by (2.7) and the assumption $R_\theta \geq R_{\tilde {\theta }}$ . Since $R_{\tilde {\theta }}\geq 0$ and $R_{\tilde {\theta }}\not \equiv 0$ , we must have $c\leq 1$ . Hence, we have $c=1$ and $u\equiv 1$ , which gives $\theta =\tilde {\theta }$ .

The unit sphere $S^{2N+1}$ in $\mathbb {C}^{N+1}=\{(z_1,...,z_{N+1})): z_i\in \mathbb {C}\}$ has a standard contact form given by

$$ \begin{align*}\theta_0=\sqrt{-1}\sum_{j=1}^{N+1}(z_jd\overline{z}_j-\overline{z}_j dz_j).\end{align*} $$

Then the Webster scalar curvature of $(S^{2N+1}, \theta _0)$ is equal to $R_{\theta _0}=N(N+1)/2$ (see, for example, [Reference Ho6]). The following corollary follows from Proposition 2.5 by putting $(M,\tilde {\theta })=(S^{2N+1}, \theta _0)$ :

Corollary 2.6. Let $(S^{2N+1}, \theta _0)$ be the standard CR sphere equipped with the standard contact form $\theta _0$ . If $\theta $ is conformal to $\theta _0$ such that $R_\theta \geq R_{\theta _0}=N(N+1)/2$ and $\theta \geq \theta _0$ , then $\theta =\theta _0$ .

3 Proof of Theorem 1.3

In this section, we prove Theorem 1.3.

Proof of Theorem 1.3

Consider the universal covering $\mathbb {R}\times S^{n-1}$ of $S^1\times S^{n-1}$ . The pullback of the metric g on $S^1\times S^{n-1}$ under the covering map gives a metric $\overline {g}$ on $\mathbb {R}\times S^{n-1}$ . By assumption (iii), the compact manifold $(S^1\times S^{n-1}, g)$ has nonnegative Ricci curvature. By Theorem 2.5 in Chapter I of [Reference Schoen and Yau13], the universal covering $(\mathbb {R}\times S^{n-1},\overline {g})$ of $S^1\times S^{n-1}$ is isometric to $\mathbb {R}^k\times M$ equipped with the product metric, where M is a compact $(n-k)$ -dimensional manifold. Hence, we must have $k=1$ , and the metric $\overline {g}$ is isometric to the product metric $ds^2+\tilde {g}$ on $\mathbb {R}\times S^{n-1}$ , where $\tilde {g}$ is a metric on $S^{n-1}$ . Therefore, the metric g, which is the metric $\overline {g}$ descending on $S^1\times S^{n-1}$ through the covering map, is isometric to the product metric $\tilde {c}\,ds^2+\tilde {g}$ on $S^1\times S^{n-1}$ , where $\tilde {c}$ is a positive real number and $\tilde {g}$ is a metric on $S^{n-1}$ . As a result, up to isometry, we can assume that

(3.1) $$ \begin{align} g=\tilde{c}\,ds^2+\tilde{g}~~\text{ in }S^1\times S^{n-1}. \end{align} $$

By assumption (ii), we have $g\geq g_c$ , which together with (3.1) implies that

$$ \begin{align*}g=\tilde{c}\,ds^2+\tilde{g}\geq c\,ds^2+g_{S^{n-1}}=g_c.\end{align*} $$

From this, we have

(3.2) $$ \begin{align} \tilde{c}\geq c~~\text{ and }~~\tilde{g}\geq g_{S^{n-1}}. \end{align} $$

In view of (3.1), the scalar curvature of g is equal to the scalar of $\tilde {g}$ , i.e., $R_{\tilde {g}}=R_g.$ Combining this with assumption (i), we have

(3.3) $$ \begin{align} R_{\tilde{g}}\geq (n-1)(n-2)=R_{g_{S^{n-1}}}. \end{align} $$

In view of (3.3) and the second condition in (3.2), we can apply Llarull’s result in Theorem 1.1 to conclude that $\tilde {g}=g_{S^{n-1}}$ . Now the assertion follows from this, (3.1), and the first condition in (3.2).

The following example shows that some assumptions in Theorem 1.3 could not be dropped. Consider the product metric

$$ \begin{align*}g=ds^2+c_1g_{S^{n-1}}\end{align*} $$

on $S^1\times S^{n-1}$ , where $c_1$ is a positive constant to be chosen. Then the Ricci curvature of g is nonnegative. In particular, assumption (iii) in Theorem 1.3 is satisfied. Moreover, the scalar curvature of g is equal to

(3.4) $$ \begin{align} R_g=c_1^{-1}R_{g_{S^{n-1}}}=c_1^{-1}(n-1)(n-2). \end{align} $$

When $c_1\neq 1$ , it follows from (3.4) that g is not isometric to $g_c=cds^2+g_{S^{n-1}}$ for any $c>0$ , since the scalar curvature of $g_c$ is equal to $(n-1)(n-2)$ . Therefore, if $c_1>1$ , then

$$ \begin{align*}g=ds^2+c_1g_{S^{n-1}}>g_{1}=ds^2+g_{S^{n-1}},\end{align*} $$

i.e., assumption (ii) in Theorem 1.3 is satisfied, and by (3.4)

$$ \begin{align*}R_g=c_1^{-1}(n-1)(n-2)<(n-1)(n-2),\end{align*} $$

i.e., assumption (iii) in Theorem 1.3 is not satisfied. To conclude, we see that assumption (iii) in Theorem 1.3 cannot be dropped. On the other hand, if $c_1<1$ , then

$$ \begin{align*}g=ds^2+c_1g_{S^{n-1}}<g_{1}=ds^2+g_{S^{n-1}},\end{align*} $$

i.e., assumption (ii) in Theorem 1.3 is not satisfied, and by (3.4)

$$ \begin{align*}R_g=c_1^{-1}(n-1)(n-2)>(n-1)(n-2),\end{align*} $$

i.e., assumption (iii) in Theorem 1.3 is satisfied. From this, we see that assumption (ii) in Theorem 1.3 also cannot be dropped.

We wonder if assumption (iii) in Theorem 1.3 could be dropped. While we are not able to come up with an example, we can prove a rigidity result of warped product metric without any assumption on Ricci curvature. To this end, we consider the warped product metric

(3.5) $$ \begin{align} g=ds^2+f(s)^2\tilde{g} \end{align} $$

on $\mathbb {R}\times S^{n-1}$ , where $f>0$ and $\tilde {g}$ is a metric on $S^{n-1}$ . Let $\{e_i\}_{i=1}^n$ be an orthonormal basis with respect to g such that $e_1$ is tangent to $\mathbb {R}$ . Then the Ricci curvature of g is given by (cf. [Reference Li8, Appendix A])

(3.6) $$ \begin{align} Ric_{1j}=-(n-1)\left((\log f)"+\big((\log f)'\big)^2\right)\delta_{1j} =-\frac{(n-1)f"}{f}\delta_{1j} \end{align} $$

for any $1\leq j\leq n$ , and

(3.7) $$ \begin{align} \nonumber Ric_{ij}&=\frac{1}{f^2}\widetilde{Ric}_{ij}-\left((\log f)"+(n-1)\big((\log f)'\big)^2\right)\delta_{ij} \\ &=\frac{1}{f^2}\left[\widetilde{Ric}_{ij}-\big(ff"+(n-2)(f')^2\big)\delta_{ij}\right] \end{align} $$

for any $2\leq i, j\leq n$ , where $\widetilde {Ric}$ denotes the Ricci curvature of $\tilde {g}$ . Take f to be a smooth periodic function on $\mathbb {R}$ with period $1$ . Then the warped product metric g defined in (3.5) descends to the metric $ds^2+f(s)^2\tilde {g}$ on $S^1\times S^{n-1}$ , which we still denote by g. And, (3.6) and (3.7) can still be applied. Using (3.6) and (3.7), we can compute the scalar curvature of g:

(3.8) $$ \begin{align} R_g =\frac{1}{f^2}\Big[R_{\tilde{g}}-(n-1)\big(2ff"+(n-2)(f')^2\big)\Big], \end{align} $$

where $R_{\tilde {g}}$ is the scalar curvature of $\tilde {g}$ .

Since f is a smooth periodic function on $\mathbb {R}$ , f is bounded. Let $m=\min f$ . If $g\geq g_1$ , then it follows from (3.5) that

$$ \begin{align*} g=ds^2+f(s)^2\tilde{g}\geq g_1=ds^2+g_{S^{n-1}}, \end{align*} $$

which gives

(3.9) $$ \begin{align} f(s)^2\tilde{g}\geq g_{S^{n-1}} \end{align} $$

for all $s\in \mathbb {R}$ . Take $s_0\in \mathbb {R}$ with $f(s_0)=m$ . Then (3.9) with $s=s_0$ implies that

(3.10) $$ \begin{align} \tilde{g}\geq m^{-2}g_{S^{n-1}}. \end{align} $$

On the other hand, if $R_g\geq (n-1)(n-2)$ , then it follows from (3.8) that

(3.11) $$ \begin{align} R_{\tilde{g}}\geq (n-1)\big(2ff"+(n-2)(f')^2\big)+(n-1)(n-2)f^2 \end{align} $$

for all $s\in \mathbb {R}$ . Once again, if we take $s_0\in \mathbb {R}$ with $f(s_0)=m=\min f$ , then the second derivative implies that $f"(s_0)\geq 0$ . This together with (3.11) at $s=s_0$ implies that

(3.12) $$ \begin{align} R_{\tilde{g}}\geq (n-1)(n-2)m^2. \end{align} $$

Hence, it follows from (3.10) and (3.12) that the rescaling metric $m^{2}\tilde {g}$ on $S^{n-1}$ satisfies

$$ \begin{align*}m^{2}\tilde{g}\geq g_{S^{n-1}}~~\text{ and }~~R_{m^{2}\tilde{g}}\geq (n-1)(n-2).\end{align*} $$

We can then apply Llarull’s result in Theorem 1.1 to infer that $m^2\tilde {g}=g_{S^{n-1}}$ . To conclude, we have proved the following:

Theorem 3.1 If g is a warped product metric on $S^1\times S^{n-1}$ given by (3.5) such that $g\geq g_1=ds^2+g_{S^{n-1}}$ and $R_g\geq (n-1)(n-2)$ , then $g=ds^2+m^{-2}g_{S^{n-1}}$ for some $m>0$ .

Acknowledgments

This work first started when the author was invited by Prof. Jaigyoung Choe to visit the Korea Institute for Advanced Study (KIAS) in the fall of 2022. The author would like to thank Prof. Jaigyoung Choe for raising the question about rigidity, and for the hospitality of KIAS.

Footnotes

This work is supported by the National Science and Technology Council (NSTC), Taiwan (Grant No. 112-2115-M-032-006-MY2).

References

Brendle, S., Rigidity phenomena involving scalar curvature . Surv. Differ. Geom. XVII(2012), 179202.10.4310/SDG.2012.v17.n1.a4CrossRefGoogle Scholar
Escobar, J. F., The Yamabe problem on manifolds with boundary . J. Differ. Geom. 35(1992), no. 1, 2184.10.4310/jdg/1214447805CrossRefGoogle Scholar
Goette, S. and Semmelmann, U., ${Spin}^c$ structures and scalar curvature estimates . Ann. Glob. Anal. Geom. 20(2001), 301324.10.1023/A:1013035721335CrossRefGoogle Scholar
Goette, S. and Semmelmann, U., Scalar curvature estimates for compact symmetric spaces . Differential Geom. Appl. 16(2002), 6578.10.1016/S0926-2245(01)00068-7CrossRefGoogle Scholar
Gromov, M., Large Riemannian manifolds . In: Curvature and topology of Riemannian manifolds (Katata, 1985), Lecture Notes in Mathematics, 1201, Springer, Berlin, 1986, pp. 108121.10.1007/BFb0075649CrossRefGoogle Scholar
Ho, P. T., The Webster scalar curvature flow on CR sphere. Part I . Adv. Math. 268(2015), 758835.10.1016/j.aim.2014.10.005CrossRefGoogle Scholar
Jerison, D. and Lee, J. M., The Yamabe problem on CR manifolds . J. Differ. Geom. 25(1987), 167197.10.4310/jdg/1214440849CrossRefGoogle Scholar
Li, P., Geometric analysis, Cambridge Studies in Advanced Mathematics, Cambridge University Press, Cambridge, 2012.10.1017/CBO9781139105798CrossRefGoogle Scholar
Listing, M., Scalar curvature on compact symmetric spaces, preprint, 2010, arXiv:1007.1832.Google Scholar
Llarull, M., Scalar curvature estimates for $\left(n+4k\right)$ -dimensional manifolds . Differential Geom. Appl. 6(1996), 321326.10.1016/S0926-2245(96)00025-3CrossRefGoogle Scholar
Llarull, M., Sharp estimates and the Dirac operator . Math. Ann. 310(1998), no. 1, 5571.10.1007/s002080050136CrossRefGoogle Scholar
Min-Oo, M., Scalar curvature rigidity of certain symmetric spaces . In: Geometry, topology and dynamics Montreal, PQ, 1995, CRM Proceedings and Lecture Notes, 15, American Mathematical Society, Providence, RI, 1998, pp. 127136.Google Scholar
Schoen, R. and Yau, S. T., Lectures on differential geometry, International Press, Boston, 1994.Google Scholar