Aviation brings great commercial and social benefits and, as the global economy develops, the demand for air transport is expected to grow. However, aviation also contributes to climate change and there is increasing international pressure to limit mean global temperature rise. Therefore, the future success of aviation is likely to depend upon the industry's ability to hold its environmental impact within politically acceptable limits. This paper describes aviation's interaction with climate and sets out, in broad terms, the challenge facing the industry. The prospects for mitigating the adverse effects by advanced technology working through aircraft design and manufacture are assessed and some potential restrictions imposed by airport infrastructure are identified. Some consideration is also given to the practicalities imposed by airline economics and the likely impact of the recent ICAO regulations, plus the proposed global-based market measures scheme for aviation carbon offset. It is argued that the environmental problem is not just about carbon dioxide emissions and that aircraft technology improvement alone is unlikely to provide a complete solution. The observation that, in current operations, the total fuel used is almost twice the minimum required suggests a need to recognise a broader ownership of the problem and broader responsibility for the solution. However, improvements in the overall system efficiency will probably need to be driven by additional regulation and the imposition of other financial measures.

The overall conclusion is that the actions currently being taken and currently being proposed are probably not sufficient in themselves to meet the challenge of climate change. However, it appears that there is more that can be done and, provided that action is taken soon, there are some grounds for optimism that aviation will still be able to meet the needs of society in the 21st century.

In this paper, we proposed a simple approach to analyse the efficiency and propulsive characteristics of the high-altitude propeller in accordance to the Vortex Lattice Lifting line Method (VLM) theory, which is commonly used in preliminary design and parametric studies of propeller propulsion. The Computational Fluid Dynamics (CFD) method was used to obtain aerofoil aerodynamic data. The optimal pitch angle and propeller blade chord length (along the radial direction) can be calculated using the information from the database. The propeller wake model sees helical slipstreams applied to both lightly and moderately loaded propellers. The proposed method is capable of identifying the optimal efficiency through varying the number of propeller blades, radius and the rotational speed. The relationship between the optimal efficiency and design parameters is then established. This method was verified using CFD calculations.

This paper adds data to help establish fidelity criteria to accompany the simulator motion system diagnostic test specified by the International Civil Aviation Organisation. Twelve airline transport pilots flew three tasks in the NASA Vertical Motion Simulator under four different motion conditions. The experiment used three different hexapod motion configurations, each with a different trade-off between motion filter gain and break frequency, and one large motion configuration that utilised as much of the simulator's motion space as possible. The motion condition significantly affected (1) pilot motion fidelity ratings, and sink rate and lateral deviation at touchdown for the approach and landing task, (2) pilot motion fidelity ratings, roll deviations, maximum pitch rate, and number of stick shaker activations in the stall task, and (3) heading deviation after an engine failure in the take-off task. Significant differences in pilot-vehicle performance were used to define initial objective motion cueing criteria boundaries. These initial fidelity boundaries show promise but need refinement.

The present work describes an experimental activity carried out to investigate the performance of Gurney flaps on a helicopter rotor model in hovering. The four blades of the articulated rotor model were equipped with Gurney flaps positioned at 95% of the aerofoil chord, spanning 14% of the rotor radius. The global aerodynamic loads and torque were measured for three Gurney flap configurations characterised by different heights. The global measurements showed an apparent benefit produced by Gurney flaps in terms of rotor performance with respect to the clean blade configuration. Particle image velocimetry surveys were also performed on the blade section at 65% of the rotor radius with and without the Gurney flaps. The local velocity data was used to complete the characterisation of the blade aerodynamic performance through the evaluation of the sectional aerodynamic loads using the the control volume approach.

The purpose of this paper is to design and develop an advanced co-flow fluidic nozzle, based on the Coanda effect concept, for multi-directional thrust vectoring of small jet engines. Recent progress on finding an optimal geometry with a fixed momentum ratio to achieve maximum thrust deflection angle is discussed here. The efficiency of the system is found to be a weakly nonlinear function of the secondary to primary flow momentum as well as three geometric parameters. A useful empirical formulation is derived for thrust vectoring angle, based on a series of tests carried out on different nozzles. An accurate computational fluid dynamics model is also developed and evaluated against the experimental data. Moreover, quasi-Newton optimisation algorithm is employed to find an optimal geometry with a constant relative jet momentum and a constant secondary slot size. In this technique, the optimal wall geometric parameters are calculated in the direction of the steepest gradient with the help of the numerical simulation model in every iteration step. Additionally, an optimised fluidic nozzle is constructed to experimentally verify the numerical results and the empirical equation.

Lean Blow-Out (LBO) limits are critically important in the operation of aero engines. Previously, Lefebvre's LBO empirical correlation has been extended to the flame volume concept by the authors. Flame volume takes into account the effects of geometric configuration, spatial interaction of mixing jets, turbulence, heat transfer and combustion processes inside the gas turbine combustion chamber. For these reasons, LBO predictions based on flame volume are more accurate. Although LBO prediction accuracy has improved, it poses a challenge associated with Vf estimation in real gas turbine combustors. This work extends the approach of flame volume prediction based on fuel iterative approximation with cold flow simulations to reactive flow simulations. Flame volume for 11 combustor configurations were simulated and validated against experimental data. To make prediction methodology robust, as required in preliminary design stage, reactive flow simulations were carried out with the combination of presumed Probability Density Function (PDF) and discrete phase model (DPM) in Fluent 15.0 The criterion for flame identification was defined. Two important parameters—critical injection diameter (Dp,crit) and critical temperature (Tcrit)—were identified and their influence on reactive flow simulation was studied for Vf estimation. Results exhibit ±15% error in Vf estimation with experimental data.