A thorough understanding of commonly used herbicide application practices and technologies is needed to provide recommendations and determine necessary application education efforts. An online survey to assess ground and aerial herbicide application practices in Arkansas was made available online in spring 2019. The survey was direct-emailed to 272 agricultural aviators and 831 certified commercial pesticide applicators, as well as made publicly available online through multiple media sources. A total of 124 responses were received, of which 75 responses were specific to herbicide applications in Arkansas agronomic crops, accounting for approximately 49% of Arkansas’ planted agronomic crop hectares in 2019. Ground and aerial application equipment were used for 49% and 51% of the herbicide applications on reported hectares, respectively. Rate controllers were commonly used application technologies for both ground and aerial application equipment. In contrast, global positioning system-driven automatic nozzle and boom shut-offs were much more common on ground spray equipment than aerial equipment. Applicator knowledge of nozzles and usage was limited, regardless of ground or aerial applicators, as only 28% of respondents provided a specific nozzle type used, indicating a need for educational efforts on nozzles and their importance in herbicide applications. Of the reported nozzle types, venturi nozzles and straight-stream nozzles were the most commonly used for ground and aerial spray equipment, respectively. Spray carrier volumes of 96.3 and 118.8 L ha−1 for ground spray equipment and 49.6 and 59.9 L ha−1 for aerial application equipment were the means of reported spray volumes for systemic and contact herbicides, respectively. Respondents indicated application optimization was a major benefit of utilizing newer application technologies, herbicide drift was a primary challenge, and research needs expressed by respondents included adjuvants, spray volume efficacy, and herbicide drift. Findings from this survey provided insight into current practices, technologies, and needs of Arkansas herbicide applicators. Research and education efforts can be implemented as a result to address aforementioned needs while providing applied research-based information to applicators based on current practices.

Proper management of glufosinate in glufosinate-resistant crop technologies is needed to mitigate the likelihood of resistance evolution. Antagonism may result from mixtures of glufosinate and other commonly used POST herbicides in soybean and cotton. Two experiments were conducted at the Arkansas Agricultural Research and Extension Center in Fayetteville, AR, in 2015 and 2016 to evaluate mixtures of glufosinate + clethodim and glufosinate + glyphosate on barnyardgrass, broadleaf signalgrass, johnsongrass, and large crabgrass. Furthermore, droplet spectra analyses were conducted to determine if droplet size was associated with identification of herbicide interactions. Antagonism was dependent on the herbicide rates and the weed species. For barnyardgrass and large crabgrass control 4 wk after treatment, glufosinate + glyphosate was antagonistic at all rates evaluated. When large crabgrass was evaluated, some mixtures (e.g., 595 g ha–1 glufosinate + 76 g ha–1 clethodim) had a significant reduction in control relative to one of the herbicides applied alone. Glufosinate (451 and 595 g ai ha–1) + glyphosate (867 and 1,735 g ae ha–1) was antagonistic at all four possible rate combinations for broadleaf signalgrass control. Fewer instances of antagonism were observed for seedling johnsongrass control than for other species, but certain treatments were identified as antagonistic (e.g., glufosinate at 451 g ai ha–1 + clethodim at 76 g ai ha–1). Overall, antagonism was less likely and greater control was observed when the highest rates of both herbicides in a given mixture were used. The addition of glyphosate or clethodim to glufosinate can increase the volume median diameter and decrease the percentage volume of fines, compared to glufosinate alone. The droplet spectra analyses indicate that the glufosinate performance may be negatively affected by the addition of glyphosate or clethodim.

Throughout eastern Arkansas, Palmer amaranth resistant to protoporphyrinogen oxidase (PPO)-inhibiting herbicides (Group 14 herbicides) has become widespread. Most PPO-resistant Palmer amaranth biotypes possess a target-site mutation, but a metabolic resistance mechanism to fomesafen (Group 14) has also been identified. Once metabolic resistance manifests, plants may also be tolerant to other herbicides and sites of action. To evaluate whether varying spray parameters affected control of PPO-resistant Palmer amaranth in dicamba-tolerant crops, field trials were conducted in 2017 and 2018 at the Lon Mann Cotton Research Station near Marianna, AR, and on-farm in Marion, AR. The experiment included split plot factors of dicamba rate, nozzle type, and carrier volume, with a whole plot factor of population. Dicamba was applied at 560 or 1120 g ae ha−1 through 110015 TTI or AirMix nozzles at 70 or 140 L ha−1 to PPO-resistant or PPO-susceptible Palmer amaranth. Palmer amaranth control 14 d after treatment (DAT) was influenced by an interaction between population and carrier volume. PPO-resistant Palmer amaranth control 14 DAT was 81% regardless of carrier volume, compared with 90% and 95% control at 70 and 140 L ha−1, respectively, of the PPO-susceptible population. An interaction between nozzle type and carrier volume influenced Palmer amaranth control 21 DAT, whereas AirMix nozzles at 140 L ha−1 controlled Palmer amaranth at a greater level (94%) than any other nozzle and carrier volume combination (≤90%). An interaction between population and dicamba rate influenced the relative density of Palmer amaranth 21 DAT. PPO-resistant Palmer amaranth density was less affected by dicamba at either rate than PPO-susceptible Palmer amaranth, relative to the nontreated check. Results concur with those of other research that suggest PPO-resistant Palmer amaranth is harder to control with dicamba. Otherwise, increasing carrier volume affected overall Palmer amaranth control to a greater degree than any other factor.

A major concern of sweetpotato producers is the potential negative effects from herbicide drift or sprayer contamination events when dicamba is applied to nearby dicamba-resistant crops. A field study was initiated in 2014 and repeated in 2015 to assess the effects of reduced rates of N,N-Bis-(3-aminopropyl)methylamine (BAPMA) or diglycloamine (DGA) salt of dicamba, glyphosate, or a combination of these individually in separate trials with glyphosate on sweetpotato. Reduced rates of 1/10, 1/100, 1/250, 1/500, 1/750, and 1/1,000 of the 1× use rate of each dicamba formulation at 0.56 kg ha−1, glyphosate at 1.12 kg ha−1, and a combination of the two at aforementioned rates were applied to ‘Beauregard’ sweetpotato at storage root formation (10 d after transplanting) in one trial and storage root development (30 d after transplanting) in a separate trial. Injury with each salt of dicamba (BAPMA or DGA) applied alone or with glyphosate was generally equal to or greater than glyphosate applied alone at equivalent rates, indicating that injury is most attributable to the dicamba in the combination. There was a quadratic increase in crop injury and a quadratic decrease in crop yield (with respect to most yield grades) observed with an increased herbicide rate of dicamba applied alone or in combination with glyphosate applied at storage root development. However, with a few exceptions, neither this relationship nor the significance of herbicide rate was observed on crop injury or sweetpotato yield when herbicide application occurred at the storage root formation stage. In general, crop injury and yield reduction were greatest at the highest rate (1/10×) of either salt of dicamba applied alone or in combination with glyphosate, although injury observed at lower rates would be cause for concern after initial observation by sweetpotato producers. However, in some cases yield reduction of No.1 and marketable grades was observed following 1/250×, 1/100×, or 1/10× application rates of dicamba alone or with glyphosate when applied at storage root development.

In recent years, there has been increased use of dicamba due to the introduction of dicamba-resistant cotton and soybean in the United States. Therefore, there is a potential increase in off-target movement of dicamba and injury to sensitive crops. Flue-cured tobacco is extremely sensitive to auxin herbicides, particularly dicamba. In addition to yield loss, residue from drift or equipment contamination can have severe repercussions for the marketability of the crop. Studies were conducted in 2016, 2017, and 2018 in North Carolina to evaluate spray-tank cleanout efficiency of dicamba using various cleaning procedures. No difference in dicamba recovery was observed regardless of dicamba formulation and cleaning agent. Dicamba residue decreased with the number of rinses. There was no difference in dicamba residue recovered from the third rinse compared with residue from the tank after being refilled for subsequent tank use. Recovery ranged from 2% to 19% of the original concentration rate among the three rinses. Field studies were also conducted in 2018 to evaluate flue-cured tobacco response to reduced rates of dicamba ranging, from 1/5 to 1/10,000 of a labeled rate. Injury and yield reductions varied by environment and application timing. When exposed to 1/500 of a labeled rate at 7 and 11 wk after transplanting, tobacco injury ranged from 39% to 53% and 10% to 16% 24 days after application, respectively. The maximum yield reduction was 62%, with a 55% reduction in value when exposed to 112 g ha−1 of dicamba. Correlations showed significant relationships between crop injury assessment and yield and value reductions, with Pearson values ranging from 0.24 to 0.63. These data can provide guidance to growers and stakeholders and emphasize the need for diligent stewardship when using dicamba technology.

Since the release of dicamba-tolerant cotton in 2016, preplant and POST applications of dicamba to control glyphosate-resistant Palmer amaranth have increased. With the increase in area treated with dicamba, the risk of off-target movement to nontarget crops has increased. A field study was conducted at the Texas Tech University New Deal Research Farm equipped with subsurface drip irrigation in 2017 and 2018 to evaluate non-dicamba tolerant cotton response to dicamba when applied at four crop growth stages [first square (FS) + 2 wk, first bloom (FB), FB + 2 wk, and FB + 5 wk]. Dicamba at 0.56 (1×), 0.056 (1/10×), 0.0112 (1/50×), 0.0056 (1/100×), and 0.00112 (1/500×) kg ae ha−1 was applied to ‘FM 1830GLT’ cotton. When applications were made at FS + 2 wk, a shift in boll nodal position was apparent following dicamba at the 1/50× rate in 2017 and at 1/10× in 2018 compared to the nontreated control (NTC). A shift in boll distribution from the 1/50× rate of dicamba was apparent at FB in 2017, but not in 2018. Dicamba applied at the 1× rate at FB + 2 wk resulted in reduced boll numbers. No change in boll number or boll position was apparent following any dicamba rate when applied at FB + 5 wk in both years. Dicamba applied at 1/500×, 1/100×, and 1/50× rates at all timings did not affect yield relative to the NTC. When dicamba was applied at the 1/10× rate, the greatest yield loss was observed at FS + 2 wk followed by FB and FB + 2 wk. Micronaire increased following dicamba applied at 1/10× at FS + 2 wk, FB, and FB + 2 wk in 2017. In 2018, micronaire decreased following dicamba applied at 1/10× at FB + 5 wk.

Field studies were conducted to determine sweetpotato tolerance to and weed control from management systems that included linuron. Treatments included flumioxazin preplant (107 g ai ha−1) followed by (fb) S-metolachlor (800 g ai ha−1), oryzalin (840 g ai ha−1), or linuron (280, 420, 560, 700, and 840 g ai ha−1) alone or mixed with S-metolachlor or oryzalin applied 7 d after transplanting. Weeds did not emerge before the treatment applications. Two of the four field studies were maintained weed-free throughout the season to evaluate sweetpotato tolerance without weed interference. The herbicide program with the greatest sweetpotato yield was flumioxazin fb S-metolachlor. Mixing linuron with S-metolachlor did not improve Palmer amaranth management and decreased marketable yield by up to 28% compared with flumioxazin fb S-metolachlor. Thus, linuron should not be applied POST in sweetpotato if Palmer amaranth has not emerged at the time of application.

A non-GMO trait called Inzen™ was recently commercialized in grain sorghum to combat weedy grasses, allowing the use of nicosulfuron POST in the crop. Inzen™ grain sorghum carries a double mutation in the acetolactate synthase (ALS) gene Val560Ile and Trp574Leu, which potentially results in cross-resistance to a wide assortment of ALS-inhibiting herbicides. To evaluate the scope of cross-resistance to Weed Science Society of America Group 2 herbicides in addition to nicosulfuron, tests were conducted in 2016 and 2017 at the Lon Mann Cotton Research Station near Marianna, AR, the Arkansas Agricultural Research and Extension Center in Fayetteville, AR, and in 2016 at the Pine Tree Research Station near Colt, AR. The tests included ALS-inhibiting herbicides from all five families: sulfonylureas, imidazolinones, pyrimidinylthiobenzoics, triazolinones, and triazolopyrimidines. Treatments were made PRE or POST to grain sorghum at a 1× rate for crops in which each herbicide is labeled. Grain sorghum planted in the PRE trial were Inzen™ and a conventional cultivar. Visible estimates of injury and sorghum heights were recorded at 2 and 4 wk after herbicide application, and yield data were collected at crop maturity. In the PRE trial, no visible injury, sorghum height reduction, or yield loss were observed in plots containing the Inzen™ cultivar. Applications made POST to the Inzen™ grain sorghum caused visible injury, sorghum height reduction, and yield loss of 20%, 13%, and 35%, respectively, only in plots where bispyribac-Na was applied. There was no impact on the crop from other POST-applied ALS-inhibiting herbicides. These results demonstrate that the Inzen™ trait confers cross-resistance to most ALS-inhibiting herbicides and could offer promising new alternatives for weed control and protection from carryover of residual ALS-inhibiting herbicides in grain sorghum.

Failure to control Palmer amaranth with glyphosate and protoporphyrinogen IX oxidase (PPO)-inhibitor herbicides was reported across southwestern Nebraska in 2017. The objectives of this study were to 1) confirm and 2) validate glyphosate and PPO-inhibitor (fomesafen and lactofen) resistance in 51 Palmer amaranth accessions from southwestern Nebraska using genotypic and whole-plant phenotypic assay correlations and cluster analysis, and 3) determine which agronomic practices might be influencing glyphosate resistance in Palmer amaranth accessions in that location. Based on genotypic assay, 88% of 51 accessions contained at least one individual with amplification (>2 copies) of the 5-enolypyruvyl-shikimate-3-phosphate synthase (EPSPS) gene, which confers glyphosate resistance; and/or a mutation in the PPX2 gene, either ΔG210 or R128G, which endows PPO-inhibitor resistance in Palmer amaranth. Cluster analysis and high correlation (0.83) between genotypic and phenotypic assays demonstrated that EPSPS gene amplification is the main glyphosate resistance mechanism in Palmer amaranth accessions from southwestern Nebraska. In contrast, there was poor association between genotypic and phenotypic responses for PPO-inhibitor resistance, which was attributed to segregation for PPO-inhibitor resistance within these accessions and/or the methodology that was adopted herein. Genotypic assays can expedite the process of confirming known glyphosate and PPO-inhibitor resistance mechanisms in Palmer amaranth from southwestern Nebraska and other locations. Phenotypic assays are also a robust method for confirming glyphosate resistance but not necessarily PPO-inhibitor resistance in Palmer amaranth. Moreover, random forest analysis of glyphosate resistance in Palmer amaranth indicated that EPSPS gene amplification, county, and current and previous crops are the main factors influencing glyphosate resistance within that geographic area. Most glyphosate-susceptible Palmer amaranth accessions were found in a few counties in areas with high crop diversity. Results presented here confirm the spread of glyphosate resistance and PPO-inhibitor resistance in Palmer amaranth accessions from southwestern Nebraska and demonstrate that less diverse cropping systems are an important driver of herbicide resistance evolution in Palmer amaranth.

Field studies were conducted in 2018 and 2019 in Arkansas, Indiana, Illinois, Missouri, and Tennessee to determine if cover-crop residue interfered with herbicides that provide residual control of Palmer amaranth and waterhemp in no-till soybean. The experiments were established in the fall with planting of cover crops (cereal rye + hairy vetch). Herbicide treatments consisted of a nontreated or no residual, acetochlor, dimethenamid-P, flumioxazin, pyroxasulfone + flumioxazin, pendimethalin, metribuzin, pyroxasulfone, and S-metolachlor. Palmer amaranth took 18 d and waterhemp took 24 d in the cover crop–alone (nontreated) treatment to reach a height of 10 cm. Compared with this treatment, all herbicides except metribuzin increased the number of days until 10-cm Palmer amaranth was present. Flumioxazin applied alone or in a mixture with pyroxasulfone were the best at delaying Palmer amaranth growing to a height of 10 cm (35 d and 33 d, respectively). The herbicides that resulted in the lowest Palmer amaranth density (1.5 to 4 times less) integrated with a cover crop were pyroxasulfone + flumioxazin, flumioxazin, pyroxasulfone, and acetochlor. Those four herbicide treatments also delayed Palmer amaranth emergence for the longest period (27 to 34 d). Waterhemp density was 7 to 14 times less with acetochlor than all the other herbicides present. Yield differences were observed for locations with waterhemp. This research supports previous research indicating that utilizing soil-residual herbicides along with cover crops improves control of Palmer amaranth and/or waterhemp.

Many factors such as environment, herbicide rate, growth stage at application, and days between sequential applications can influence the response of a crop to herbicides. Florpyrauxifen-benzyl is a new broad-spectrum, POST herbicide that was commercialized for use in U.S. rice production in 2018. Field experiments were conducted in 2018 at the Pine Tree Research Station (PTRS) near Colt, AR, and the Rice Research and Extension Center (RREC), near Stuttgart, AR, to evaluate crop injury and yield response of three rice cultivars to sequential applications of florpyrauxifen-benzyl. Greenhouse and growth chamber experiments were conducted at the Altheimer Laboratory in Fayetteville, AR, to evaluate cultivar responses when florpyrauxifen-benzyl was applied at 30 or 60 g ae ha−1 to rice exposed to different temperature regimes or at various growth stages. Three rice cultivars were used in all experiments: long-grain variety ‘CL111’, medium-grain variety ‘CL272’, and long-grain hybrid cultivar ‘CLXL745’. CL111 exhibited sufficient tolerance to florpyrauxifen-benzyl with only 10% visible injury and no effect on yield. CL272 showed 15% injury 3 wk after the second application in the field experiment when applications were made 14 d apart. Additionally, 12% injury was observed in greenhouse studies when florpyrauxifen-benzyl was applied at 30 g ae ha−1, averaged over various growth stages at application. Florpyrauxifen-benzyl did not reduce the yield of CL272 in field experiments, indicating that CL272 can recover from florpyrauxifen-benzyl injury. As much as 64% injury was observed for CLXL745 at 3 wk after application (WAA) when sequential herbicide applications were made 4 d apart. High levels of injury occurred in the growth chamber and greenhouse studies for this cultivar as well. Sequential applications of florpyrauxifen-benzyl reduced yields of CLXL745 in nearly all treatments. Data from these experiments suggest that CL272 and CLXL745 are sensitive to sequential applications of florpyrauxifen-benzyl. Growers must follow the prescribed guidelines for using florpyrauxifen-benzyl in these cultivars and others like it.

A field study was conducted in 2017 and 2018 to determine foliar efficacy of halauxifen-methyl, 2,4-D, or dicamba applied alone and in combination with glyphosate at preplant burndown timing. Experiments were conducted near Painter, VA; Rocky Mount, NC; Jackson, NC; and Gates, NC. Control of horseweed, henbit, purple deadnettle, cutleaf evening primrose, curly dock, purple cudweed, and common chickweed were evaluated. Halauxifen-methyl applied at 5 g ae ha−1 controlled small and large horseweed 89% and 79%, respectively, and was similar to control by dicamba applied at 280 g ae ha−1. Both rates of 2,4-D—533 g ae ha−1(low rate [LR]) or 1,066 g ae ha−1 (high rate [HR])—were less effective than halauxifen-methyl and dicamba for controlling horseweed. Halauxifen-methyl was the only auxin herbicide to control henbit (90%) and purple deadnettle (99%). Cutleaf evening primrose was controlled 74% to 85%, 51%, and 4% by 2,4-D, dicamba, and halauxifen-methyl, respectively. Dicamba and 2,4-D controlled curly dock 59% to 70% and were more effective than halauxifen-methyl (5%). Auxin herbicides applied alone controlled purple cudweed and common chickweed 21% or less. With the exception of cutleaf evening primrose (35%) and curly dock (37%), glyphosate alone provided 95% or greater control of all weeds evaluated. These experiments demonstrate halauxifen-methyl effectively (≥79%) controls horseweed, henbit, and purple deadnettle, whereas common chickweed, curly dock, cutleaf evening primrose, and purple cudweed control by the herbicide is inadequate (≤7%).

During the 2017 to 2019 growing seasons, samples of waterhemp and Palmer amaranth that had reportedly survived field-rate applications of protoporphyrinogen oxidase (PPO)–inhibiting herbicides were collected from the American Midwest and tested for target-site mutations known at the time to confer resistance. Target-site resistance was identified in nearly all (135 of 145) tested common waterhemp populations but in only 8 of 13 Palmer amaranth populations. Follow-up research on one population of Palmer amaranth (W-8), which tested negative for all such mutations, confirmed it was resistant to lactofen, with a magnitude of resistance comparable to that conferred by the ΔG210 PPO2 mutation. Gene sequences from both isoforms of PPO (PPO1 and PPO2) were compared between W-8 and known PPO inhibitor–sensitive sequence. A glycine-to-alanine substitution at the 399th amino acid position (G399A) of PPO2, recently identified to reduce target-site herbicide sensitivity, was observed in a subset of resistant W-8 plants. Because no missense mutation completely delimited resistant and sensitive sequences, we initially suspected the presence of a secondary, non-target-site resistance mechanism in this population. To isolate G399A, a segregating F2 population was produced and screened with a delimiting rate of lactofen. χ2 goodness-of-fit analysis of dead/alive ratings indicated single-locus inheritance of resistance in the F2 population, and molecular markers for the W-8 parental PPO2 coding region co-segregated tightly, but not perfectly, with resistance. More research is needed to fully characterize Palmer amaranth PPO inhibitor–resistance mechanisms, which appear to be more diverse than those found in common waterhemp.

Overreliance on herbicides for weed control has led to the evolution of herbicide-resistant Palmer amaranth populations. Farm managers should consider the long-term consequences of their short-term management decisions, especially when considering the soil weed seedbank. The objectives of this research were to (1) determine how soybean population and POST herbicide application timing affects in-season Palmer amaranth control and soybean yield, and (2) how those variables influence Palmer amaranth densities and cotton yields the following season. Soybeans were planted (19-cm row spacing) at a low-, medium-, and high-density population (268,000, 546,000, and 778,000 plants ha–1, respectively). Fomesafen and clethodim (280 and 210 g ai ha–1, respectively) were applied at the VE, V1, or V2 to V3 soybean growth stage. Nontreated plots were also included to assess the effect of soybean population alone. The following season, cotton was planted into these plots so as to understand the effects of soybean planting population on Palmer amaranth densities in the subsequent crop. When an herbicide application occurred at the V1 or V2 to V3 soybean stage, weed control in the high-density soybean population increased 17% to 23% compared to the low-density population. Economic return was not influenced by soybean population and was increased 72% to 94% with herbicide application compared to no treatment. In the subsequent cotton crop, Palmer amaranth densities were 24% to 39% lower 3 wk after planting when following soybean sprayed with herbicides compared to soybean without herbicides. Additionally, Palmer amaranth densities in cotton were 19% lower when soybean was treated at the VE stage compared to later stages. Thus, increasing soybean population can improve Palmer amaranth control without adversely affecting economic returns and can reduce future weed densities. Reducing the weed seedbank and selection pressure from herbicides are critical in mitigating resistance evolution.

Use of synthetic auxin herbicides has increased across the midwestern United States after adoption of synthetic auxin-resistant soybean traits, in addition to extensive use of these herbicides in corn. Off-target movement of synthetic auxin herbicides such as dicamba can lead to severe injury to sensitive plants nearby. Previous research has documented effects of glyphosate on spray-solution pH and volatility of several dicamba formulations, but our understanding of the relationships between glyphosate and dicamba formulations commonly used in corn and for 2,4-D remains limited. The objectives of this research were to (1) investigate the roles of synthetic auxin herbicide formulation, glyphosate, and spray additives on spray solution pH; (2) assess the impact of synthetic auxin herbicide rate on solution pH; and (3) assess the influence of glyphosate and application time of year on dicamba and 2,4-D volatility using soybean as bioindicators in low-tunnel field volatility experiments. Addition of glyphosate to a synthetic auxin herbicide decreased solution pH below 5.0 for four of the seven herbicides tested (range of initial pH of water source, 7.45–7.70). Solution pH of most treatments was lower at a higher application rate (4× the labeled POST rate) than the 1× rate. Among all treatment factors, inclusion of glyphosate was the most important affecting spray solution pH; however, the addition of glyphosate did not influence area under the injury over distance stairs (P = 0.366) in low-tunnel field volatility experiments. Greater soybean injury in field experiments was associated with high air temperatures (maximum, >29 C) and low wind speeds (mean, 0.3–1.5 m s−1) during the 48 h after treatment application. The two dicamba formulations (diglycolamine with VaporGrip® and sodium salts) resulted in similar levels of soybean injury for applications that occurred later in the growing season. Greater soybean injury was observed after dicamba than after 2,4-D treatments.

Field experiments were conducted in 2018 and 2019 at Kansas State University Ashland Bottoms (KSU-AB) research farm near Manhattan, KS, and Kansas State University Agricultural Research Center (KSU-ARC) near Hays, KS, to determine the effectiveness of various PRE-applied herbicide premixes and tank mixtures alone or followed by (fb) an early POST (EPOST) treatment of glyphosate + dicamba for controlling glyphosate-resistant (GR) Palmer amaranth in glyphosate/dicamba-resistant (GDR) soybean. In experiment 1, PRE-applied sulfentrazone + S-metolachlor, saflufenacil + imazethapyr + pyroxasulfone, chlorimuron + flumioxazin + pyroxasulfone, and metribuzin + flumioxazin + imazethapyr provided 85% to 94% end-of-season control of GR Palmer amaranth across both sites. In comparison, Palmer amaranth control ranged from 63% to 87% at final evaluation with PRE-applied pyroxasulfone + sulfentrazone, pyroxasulfone + sulfentrazone plus metribuzin, pyroxasulfone + sulfentrazone plus carfentrazone + sulfentrazone, and sulfentrazone + metribuzin at the KSU-ARC site in experiment 2. All PRE fb EPOST (i.e., two-pass) programs provided near-complete (98% to 100%) control of GR Palmer amaranth at both sites. PRE-alone programs reduced Palmer amaranth shoot biomass by 35% to 76% in experiment 1 at both sites, whereas all two-pass programs prevented Palmer amaranth biomass production. No differences in soybean yields were observed among tested programs in experiment 1 at KSU-ARC site; however, PRE-alone sulfentrazone + S-metolachlor, saflufenacil + imazethapyr + pyroxasulfone, and chlorimuron + flumioxazin + pyroxasulfone had lower grain yield (average, 4,342 kg ha−1) compared with the top yielding (4,832 kg ha−1) treatment at the KSU-AB site. PRE-applied sulfentrazone + metribuzin had a lower soybean yield (1,776 kg ha−1) compared with all other programs in experiment 2 at the KSU-ARC site. These results suggest growers should proactively adopt effective PRE-applied premixes fb EPOST programs evaluated in this study to reduce selection pressure from multiple POST dicamba applications for GR Palmer amaranth control in GDR soybean.

Glyphosate-resistant (GR) Palmer amaranth is a problematic, annual broadleaf weed in soybean production fields in Nebraska and many other states in the United States. Soybean resistant to 2,4-D, glyphosate, and glufosinate (Enlist E3TM) has been developed and was first grown commercially in 2019. The objectives of this research were to evaluate the effect of herbicide programs applied PRE, PRE followed by (fb) late-POST (LPOST), and early-POST (EPOST) fb LPOST on GR Palmer amaranth control, density, and biomass reduction, soybean injury, and yield. Field experiments were conducted near Carleton, NE, in 2018, and 2019 in a grower’s field infested with GR Palmer amaranth in 2,4-D–, glyphosate-, and glufosinate-resistant soybean. Sulfentrazone + cloransulam-methyl, imazethapyr + saflufenacil + pyroxasulfone, and chlorimuron ethyl + flumioxazin + metribuzin applied PRE provided 84% to 97% control of GR Palmer amaranth compared with the nontreated control 14 d after PRE. Averaged across herbicide programs, PRE fb 2,4-D and/or glufosinate, and sequential application of 2,4-D or glufosinate applied EPOST fb LPOST resulted in 92% and 88% control of GR Palmer amaranth, respectively, compared with 62% control with PRE-only programs 14 d after LPOST. Reductions in Palmer amaranth biomass followed the same trend; however, Palmer amaranth density was reduced 98% in EPOST fb LPOST programs compared with 91% reduction in PRE fb LPOST and 76% reduction in PRE-only programs. PRE fb LPOST and EPOST fb LPOST programs resulted in an average soybean yield of 4,478 and 4,706 kg ha−1, respectively, compared with 3,043 kg ha−1 in PRE-only programs. Herbicide programs evaluated in this study resulted in no soybean injury. The results of this research illustrate that herbicide programs are available for the management of GR Palmer amaranth in 2,4-D–, glyphosate-, and glufosinate-resistant soybean.

Trifludimoxazin, a new protoporphyrinogen oxidase–inhibiting herbicide, is being evaluated for possible use as a soil-residual active herbicide treatment in cotton for control of small-seeded annual broadleaf weeds. Laboratory and greenhouse studies were conducted to compare vertical mobility and cotton tolerance of trifludimoxazin to flumioxazin and saflufenacil, which are two currently registered protoporphyrinogen oxidase–inhibiting herbicides for use in cotton, in three West Texas soils. Vertical soil mobility of trifludimoxazin was similar to flumioxazin in Acuff loam and Olton loam soils, but was more mobile than flumioxazin in the Amarillo loamy sand soil. The depth of trifludimoxazin movement after a 2.5-cm irrigation event ranged from 2.5 to 5.0 cm in all soils, which would not allow for crop selectivity based on herbicide placement, because ideal cotton seeding depth is from 0.6 to 2.54 cm deep. Greenhouse studies indicated that PRE treatments were more injurious than the 14 d preplant treatment when summarized across soils for the three herbicides (43% and 14% injury, respectively). No differences in visual cotton response or dry weight was observed after trifludimoxazin preplant as compared with the nontreated control within each of the three West Texas soils and was similar to the flumioxazin preplant across soils. On the basis of these results, a use pattern for trifludimoxazin in cotton may be established with the use of a more than 14-d preplant restriction before cotton planting.

Tolpyralate is a new 4-hydroxyphenyl-pyruvate dioxygenase (HPPD)–inhibiting herbicide for weed control in corn. Previous research has reported efficacy of tolpyralate + atrazine on several annual grass and broadleaf weed species; however, no studies have evaluated weed control of tolpyralate + atrazine depending on time-of-day (TOD) of application. Six field experiments were conducted over a 2-yr period (2018, 2019) near Ridgetown, ON, to determine if there is an effect of TOD of application on tolpyralate + atrazine efficacy on common annual grass and broadleaf weeds. An application was made at 3-h intervals beginning at 06:00 h with the last application at 24:00 h. There was a slight TOD effect on velvetleaf, pigweed species, and common ragweed control with tolpyralate + atrazine; however, the magnitude of change throughout the day was ≤3% at 2, 4, or 8 wk after application (WAA). There was no effect of TOD of tolpyralate + atrazine on the control of lambsquarters, barnyardgrass, and green foxtail. All weed species were controlled ≥88% at 8 WAA. There was no effect of TOD of tolpyralate + atrazine application on corn yield. Results of this study show no evidence of a TOD effect on weed control efficacy with tolpyralate + atrazine.

A stakeholder survey was conducted from April through June of 2018 to understand stakeholders’ perceptions and challenges about cropping systems and weed management in Brazil. The dominant crops managed by survey respondents were soybean (73%) and corn (66%). Approximately 75% of survey respondents have grown or managed annual cropping systems with two to three crops per year cultivated in succession. Eighteen percent of respondents manage only irrigated cropping systems, and over 60% of respondents adopt no-till as a standard practice. According to respondents, the top five troublesome weed species in Brazilian cropping systems are horseweed (asthmaweed, Canadian horseweed, and tall fleabane), sourgrass, morningglory, goosegrass, and dayflower (Asiatic dayflower and Benghal dayflower). Among the nine species documented to have evolved resistance to glyphosate in Brazil, horseweed and sourgrass were reported as the most concerning weeds. Other than glyphosate, 31% and 78% of respondents, respectively, manage weeds resistant to acetyl-CoA carboxylase (ACCase) inhibitors and/or acetolactate synthase (ALS) inhibitors. Besides herbicides, 45% of respondents use mechanical, and 75% use cultural (e.g., no-till, crop rotation/succession) weed control strategies. Sixty-one percent of survey respondents adopt cover crops to some extent to suppress weeds and improve soil chemical and physical properties. Nearly 60% of survey respondents intend to adopt the crops that are resistant to dicamba or 2,4-D when available. Results may help practitioners, academics, industry, and policy makers to better understand the bad and the good of current cropping systems and weed management practices adopted in Brazil, and to adjust research, education, technologies priorities, and needs moving forward.