Introduction
Pentastiridius leporinus (Hemiptera: Auchenorrhyncha: Cixiidae) is the main vector for syndrome ‘basses richesses’ (SBR) disease in sugar beet (Beta vulgaris) which is a fast-spreading disease in Central Europe and causing up to 5% absolute sugar content loss and severe yield reduction of the taproot (Gatineau et al., Reference Gatineau, Jacob, Vautrin, Larrue, Lherminier, Richard-Molard and Boudon-Padieu2002; Sémétey et al., Reference Sémétey, Bressan, Richard-Molard and Boudon-Padieu2007c; Bressan et al., Reference Bressan, Sémétey, Nusillard, Clair and Boudon-Padieu2008). The disease was initially reported in eastern France in 1991 (Gatineau et al., Reference Gatineau, Jacob, Vautrin, Larrue, Lherminier, Richard-Molard and Boudon-Padieu2002) and then further spreaded into sugar beet fields in Germany (Pfitzer et al., Reference Pfitzer, Schrameyer, Voegele, Maier, Lang and Varrelmann2020; Behrmann et al., Reference Behrmann, Schwind, Schieler, Vilcinskas, Martinez, Lee and Lang2021) and Switzerland (Mahillon et al., Reference Mahillon, Groux, Bussereau, Brodard, Debonneville, Demal, Kellenberger, Peter, Steinger and Schumpp2022). The causal agents of SBR are the γ-3-proteobacterium ‘Candidatus Arsenophonus phytopathogenicus’ (here called: ‘SBR proteobacterium’) and a phytoplasma from the stolbur group (16SrXII group) ‘Candidatus Phytoplasma solani’ which are exclusively transmitted by planthoppers (Sémétey et al., Reference Sémétey, Gatineau, Bressan and Boudon-Padieu2007a; Bressan et al., Reference Bressan, Sémétey, Nusillard, Clair and Boudon-Padieu2008). Among them, P. leporinus is the key factor in spreading the SBR disease. This is due to the high population densities, infection rates, the ability to transmit both pathogens and vertical transmission of the SBR proteobacterium to their offspring (Sémétey et al., Reference Sémétey, Bressan, Richard-Molard and Boudon-Padieu2007c; Bressan et al., Reference Bressan, Sémétey, Nusillard, Clair and Boudon-Padieu2008; Pfitzer et al., Reference Pfitzer, Schrameyer, Voegele, Maier, Lang and Varrelmann2020; Mahillon et al., Reference Mahillon, Groux, Bussereau, Brodard, Debonneville, Demal, Kellenberger, Peter, Steinger and Schumpp2022). Additionally, this insect vector has been host-shifted from natural host plant, reed (Phragmites australis) to sugar beet and other crops including barley (Hordeum vulgare) and winter wheat (Triticum aestivum) during crop rotations (Holzinger et al., Reference Holzinger, Kammerlander and Nickel2003; Bressan et al., Reference Bressan, Holzinger, Nusillard, Sémétéy, Gatineau, Simonato and Boudon-Padieu2009b). This phenomenon together with increasing P. leporinus populations led to a significant SBR spread in sugar beet (Bressan, Reference Bressan2009; Bressan et al., Reference Bressan, Holzinger, Nusillard, Sémétéy, Gatineau, Simonato and Boudon-Padieu2009b; Bressan et al., Reference Bressan, Moral García and Boudon-Padieu2011).
In addition to P. leporinus, several Auchenorrhyncha species including two closely related cixiid planthoppers, Reptalus quinquecostatus and Hyalesthes obsoletus, have been collected in sugar beet fields in France (Sémétey et al., Reference Sémétey, Bressan, Gatineau and Boudon-Padieu2007b) and Germany (Pfitzer, Reference Pfitzer2019). R. quinquecostatus has recently undergone a taxonomic revision with a new name, R. artemisiae (Emeljanov, Reference Emeljanov2020). To provide easier connection to the published data regarding this species, we referred to it as R. quinquecostatus. P. leporinus can be hardly distinguished from R. quinquecostatus and H. obsoletus by morphological traits. Based on the morphological traits, these species are also closely related (Ceotto and Bourgoin, Reference Ceotto and Bourgoin2008). They have hyaline or transparent wings and their mesonotum has five keels and the absence of a post-tibial calcar at the hind legs and their fore wings are characterised by a roof-shaped resting position (Holzinger et al., Reference Holzinger, Kammerlander and Nickel2003). Identification of P. leporinus based on morphological characters is challenging and time consuming (Bertin et al., Reference Bertin, Picciau, Ács, Alma and Bosco2010a). This requires highly skilled and experienced personnel which limits the throughput in practical monitoring. Further, the morphological keys for P. leporinus identification at the species level are exclusively described for male adults and thus lacking for female adults and nymphal instars (Holzinger et al., Reference Holzinger, Kammerlander and Nickel2003; Biedermann and Niedringhaus, Reference Biedermann and Niedringhaus2004). Further, identification of sticky trap collected insects which is a common method of monitoring the vector spread could be more difficult and error prone for identification based on morphological characters (Bertin et al., Reference Bertin, Picciau, Ács, Alma and Bosco2010b).
Supporting the morphological identification or even as an alternative identification method, molecular methods such as DNA barcoding (Virgilio et al., Reference Virgilio, Backeljau, Nevado and De Meyer2010) have been used for insects. Among these methods, polymerase chain reaction (PCR) is the most widely used (Mullis et al., Reference Mullis, Faloona, Scharf, Saiki, Horn and Erlich1986) to specifically amplify a part of insect genome that can be sequenced and used for identification. However, due to the requirements of a PCR machine, time, and professional operation, it is difficult to apply PCR for on-site detection. In recent years, the advancement and application of isothermal amplification methods have been emerged rapidly. These isothermal amplification methods including loop-mediated isothermal amplification (LAMP) (Notomi et al., Reference Notomi, Okayama, Masubuchi, Yonekawa, Watanabe, Amino and Hase2000), helicase-dependent isothermal DNA amplification (HAD) (Jeong et al., Reference Jeong, Park and Kim2009), rolling-circle amplification (RCA) (Ali et al., Reference Ali, Li, Zhang, Zhang, Kang, Ankrum, Le and Zhao2014) and recombinase polymerase amplification (RPA) (Piepenburg et al., Reference Piepenburg, Williams, Stemple and Armes2006, Lobato and O'Sullivan, Reference Lobato and O'Sullivan2018), which use different enzyme mechanisms and settings. The RPA assay uses three core enzymes including recombinase, single-stranded DNA binding protein, and strand-displacing polymerase (Piepenburg et al., Reference Piepenburg, Williams, Stemple and Armes2006). Due to a simple operation, reaction at 37–42°C and fast amplification speed (5–20 min), RPA is widely used in various fields like the detection of bacteria, fungi, parasites, viruses or drug resistance genes in recent years (Mota et al., Reference Mota, Guimarães, Gandarilla, Filho, Brito and Mariúba2022; Tan et al., Reference Tan, Liao, Liang, Yi, Zhou and Wei2022). Additionally, compared to other common isothermal amplification methods (RCA, LAMP, HAD), RPA requires only simple primer design, tolerates certain mismatches in primers and allows multiplex amplification (Tan et al., Reference Tan, Liao, Liang, Yi, Zhou and Wei2022). However, there are only few examples for application of RPA for the identification of insects. For examples, RPA has been used to identify Thrips palmi (Thysanoptera: Thripidae), a vector of tospoviruses. They targeted a conserved region of ITS2 to identify all known intra-specific variants of this insect species (Priti et al., Reference Priti, Jangra, Baranwal, Dietzgen and Ghosh2021).
The use of mitochondrial gene cytochrome c oxidase I (COI) was established as the core of a global bioidentification system for animals including insects (Hebert et al., Reference Hebert, Cywinska, Ball and deWaard2003). It was demonstrated that species–level assignments can be obtained by creating comprehensive COI profiles (Hebert et al., Reference Hebert, Cywinska, Ball and deWaard2003). This gene also was used for identification and phylogenetic analysis of planthoppers in the genera Hyalesthes and Reptalus by using species-specific primers (Bressan et al., Reference Bressan, Arneodo, Simonato, Haines and Boudon-Padieu2009a; Bertin et al., Reference Bertin, Picciau, Ács, Alma and Bosco2010b). Recently, we have designed specific primers based on COI gene to identify and differentiate all life stages of P. leporinus from two closely related cixiid species, R. quinquecostatus and H. obsoletus, in sugar beet using PCR (Pfitzer et al., Reference Pfitzer, Varrelmann, Hesse and Eini2022a). In this study, a rapid and real-time detection of P. leporinus was developed based on the RPA assay. The sensitivity and specificity of the RPA assays for detection of both adults and nymphal stages were compared to real-time PCR assay using a simple and quick method for template DNA preparation.
Materials and methods
Planthopper collection from sugar beet fields and morphological identification
The main SBR vector, P. leporinus, and two morphologically close planthopper species (R. quinquecostatus, and H. obsoletus) were field collected with sweep nets during summer 2020 from several locations (Baden-Württemberg, Rhineland-Palatinate, and Saxony) in Germany (Pfitzer et al., Reference Pfitzer, Varrelmann, Schrameyer and Rostás2022b). Morphological identification of the sweep net collected insects was carried out using a stereomicroscope according to the taxonomic key (Biedermann and Niedringhaus, Reference Biedermann and Niedringhaus2004). The family and genus of individual female adult specimens were identified by observation of pronotum, wings, postnotum, mesonotum, and tarsus. Furthermore, the genital structures of male adults were evaluated to allow morphological identification at the species level. Additionally, species identification for both female and male insects was confirmed by sequencing COI gene (Pfitzer et al., Reference Pfitzer, Varrelmann, Hesse and Eini2022a). Additionally, nymphal instars of P. leporinus were obtained from our local P. leporinus rearing on sugar beet (Pfitzer et al., Reference Pfitzer, Varrelmann, Schrameyer and Rostás2022b). Developmental stages of nymphs were determined under a stereomicroscope according to the described key (Pfitzer et al., Reference Pfitzer, Varrelmann, Schrameyer and Rostás2022b) and the third, fourth and fifth nymphal instars were used in this study. We had no access to the nymphal stages of R. quinquecostatus, and H. obsoletus, therefore, only adults (male and female) were included.
Template DNA preparation
Two methods were used for preparation of template DNA from the insect specimens. Pure DNA from insects (adults or nymphs; fig. S1) was prepared using ‘DNeasy Blood & Tissue Kit’ (QIAGEN GmbH, Hilden, Germany) according to the manufacturer's instructions and dissolved in 60 μl of Tris acetate buffer (pH = 7). For crude extracts a slightly modified method described by Priti et al. (Reference Priti, Jangra, Baranwal, Dietzgen and Ghosh2021) was used. The insects (one adult or one nymph) were individually transferred into 1.5 ml tubes containing 60 μl phosphate-buffered saline (PBS; pH = 7.4) and then crushed with a sterile micropestle. After 10 min incubation at 95°C, samples were centrifuged for 10 min with 13,500 × g at room temperature. The supernatants were used as a PCR or RPA template. DNA quality and quantity were analysed with a spectrophotometer (‘DeNovix DS-110’, DeNovix Inc., Wilmington, USA) and via gel electrophoresis (fig. S2).
Primer design and RPA assay
For efficient RPA assay, primers (31 and 32 bp in size) were designed based on the COI gene sequence from P. leporinus (GenBank accession number ONO94072) following the instruction by TwistAmp® kit (TwistDx Ltd. Cambridge, UK). For this purpose, primer sequences that produced secondary structure, hairpin and primer-primer binding were avoided (Wan Rasni et al., Reference Wan Rasni, Yahaya and Mohamed Rehan2022). For the specificity of primers, COI sequences of P. leporinus, R. quinquecostatus, and H. obsoletus were obtained from our recent study (Pfitzer et al., Reference Pfitzer, Varrelmann, Hesse and Eini2022a) and NCBI database (National Center for Biotechnology Information, U.S. National Library of Medicine, Rockville Pike, MD, USA). These sequences were aligned using BioEdit software (version 7.2; https://bioedit.software.informer.com/7.2/), then primers with no mismatch to the COI gene of P. leporinus but with mismatches to the COI gene of the closely related species were selected and tested in silico on close cixiid species (fig. 1) and species which were reported from sugar beet fields, P. leporinus, R. quinquecostatus and H. obsoletus (Sémétey et al., Reference Sémétey, Bressan, Gatineau and Boudon-Padieu2007b; Pfitzer, Reference Pfitzer2019). Table 1 shows the sequence, GC content and melting temperature of the designed primers.
The specificity of the designed primers was initially tested by PCR and compared to RPA assay. For PCR reactions, 10 μM of each primers (Penta-F and Penta-R) were used in a final volume of 20 μl containing 10 μl ‘DreamTaq PCR Master Mix (2X)’ (Thermo Fisher Scientific, Waltham, MA, USA), and about 100 ng of DNA templates from P. leporinus and two close species, respectively. The PCR conditions were 95°C for 3 min, 30 cycles at 95°C for 30 s, 56°C for 25 s and 72°C for 25 s and a final step at 72°C for 2 min according to the protocol by ThemoFisher Scientific (https://assets.thermofisher.com/TFS-Assets/BID/Reference-Materials/dreamtaq-dna-polymerases-labaid.pdf).
RPA reactions were performed according to the instruction of the TwistAmp® Basic kit (TwistDx Ltd. Cambridge, UK). For each reaction, 10.7 μl of sterile water, 2.4 μl of forward and reverse primers (10 μM; Penta-F and Penta-R), 29.5 μl of rehydration buffer and 2.5 μl of template were mixed. This mixture was added to an enzyme pellet from the kit. All samples were kept on ice during the preparation. To start the reactions, 2.5 μl of magnesium acetate solution (280 mM) was added to each tube. The tubes were briefly vortexed, then centrifuged and incubated in a water bath at 39°C for 5, 10 or 15 min. After the RPA reaction, the products were heated at 80°C for 5 min to inactivate the polymerase. The RPA and PCR products (2 μl) were analysed by gel electrophoresis. The amplified DNA in PCR or RPA assays was sequenced (Microsynth Seqlab GmbH, Göttingen, Germany) and aligned with published sequence data for COI gene of P. leporinus (Pfitzer et al., Reference Pfitzer, Varrelmann, Hesse and Eini2022a) to confirm the specificity of each assay.
The sensitivity of RPA and PCR was tested using ten-fold serial dilutions of crude nucleic acid from P. leporinus adults and nymphs. One microliter of each template DNA dilution was amplified in each assay. The RPA and PCR products were analysed by gel electrophoresis.
Real-time PCR and real-time RPA assay
For real-time PCR, each reaction was set up in a 15 μl volume containing 1x iTaq Universal SYBR Green Supermix (BioRad, Hercules, USA), 0.330 μM of each primer (Penta-F and Penta-R) and 1 μl DNA (about 100 ng). The qPCR was carried out in the CFX96 Real Time System C1000 Touch Thermal Cycler (Bio-Rad, Feldkirchen, Germany). The reaction was set with initial denaturation of 95°C for 3 min followed by 40 cycles of 95°C for 10 s and 60°C for 20 s. Three biological samples were tested for each insect group and each biological sample was analysed with three technical replicates. The threshold cycle (CT) data was analysed based on Livak and Schmittgen (Reference Livak and Schmittgen2001) with some modification. As the aim of this assay was specific detection of P. leporinus rather than quantification of COI gene, normalisation of data against a house keeping gene was not included. The CT value is the cycle at which the fluorescence signal reaches a threshold value, so a low number of CT represents a higher concentration of target gene in each sample. Therefore, an average of 2−Ct was calculated for each sample. Data were statistically analysed with R software (Tukey test, P < 0.05).
Real-time RPA assay was performed using the TwistAmp® Basic kit with some modifications. For each reaction, 10.2 μl of iTaq Universal SYBR Green Supermix, 2.4 μl of forward and reverse primers (10 μM, Penta-F and Penta-R), 29.5 μl of rehydration buffer and 3 μl of template (about 200 ng) were mixed. This mixture was added to an enzyme pellet from the kit. Then, 2.5 μl magnesium acetate (280 mM) was added to reach 50 μl volume. This mixture was mixed and divided into two tubes each containing a final 25 μl reaction. This was to have more technical replicates and to scale down the costs for each reaction. The real-time RPA reactions were carried out in the CFX96 Real Time System C1000 Touch Thermal Cycler. The reaction was set at 39°C for 20 min and fluorescence signals were measured after each 40 s. Then, enzyme reaction was stopped at 80°C for 10 s. The melting curve was created by ramping the temperature from 65°C to 95°C by 0.5°C. The fluorescence cycle threshold for SYBR Green was set just above the water control for each platform, so that samples with equal or less fluorescence than the water control were identified as negative (Teoh et al., Reference Teoh, Sam, Tan, Danlami, Shu, Johari, Hooi, Brooks, Piepenburg, Nentwich, Wilder-Smith, Franco, Tenorio and AbuBakar2015). Three replicates of each variant in at least three independent runs were performed for sensitivity and specificity experiments. In addition, the amplified products were directly run on 1% agarose gel without any additional purification step (Babujee et al., Reference Babujee, Witherell, Mikami, Aiuchi, Charkowski and Rakotondrafara2019) and the amplicons were visualised under UV light (312 nm).
The sensitivity of real-time RPA and real-time PCR was tested using a ten-fold serial dilution of crude nucleic acid extracts from individual P. leporinus adults and fourth-instar nymphs. To reduce time and cost and also to optimising this assay for the future field application only the crude nucleic acid extracts from individual insects were tested and therefore, the precise measurement of nucleic templates was not possible. Thus, this assay was repeated at least three times to obtain more robust data based on a single insect per sample. One microliter of each template DNA dilution was amplified in both assays using the explained reaction conditions for Real-time RPA assay. The threshold time was plotted against the detected DNA templates.
Results
Specific P. leporinus detection by RPA
The specific primers for P. leporinus (fig. 1) based on the sequence of the COI gene, produced a specific PCR product of the expected size (269 bp) from adults (female and male) samples using kit purified nucleic acids as a template. No amplicon was detected for the closely related planthoppers, R. quinquecostatus and H. obsoletus (fig. 2a). The same results were obtained in the RPA assay at 39°C for 15 min (fig. 2b). In addition, shorter reaction times showed clear RPA products to appear as well after 10 minutes. However, COI amplification and planthopper detection was not possible as early as 5 min (fig. 2c and S3). The sensitivity of the RPA assay for P. leporinus monitoring in crude samples was tested on a 10-fold dilution series. The COI gene from P. leporinus adults was detectable in dilution range from 1 × 10−1 to 1 × 10−3 for the adults and 1 × 10−1 to 1 × 10−2 for nymphs. Therefore, these specific primers can be used for specific detection of P. leporinus by RPA in a short reaction time (10 min).
Real-time PCR for specific P. leporinus detection
The real-time PCR assay was used to test specific detection of P. leporinus from pure and crude nucleic acids from nymph and adult samples. The COI gene was specifically detected in both P. leporinus adults and nymphs using specific primers and pure nucleic acid template (fig. 3a). The fluorescence signal intensity for adults (male and female) and nymphal stages (L3, L4, and L5) reflected their body size. Variations of the size of nymphal stages and adults have been described (Pfitzer et al., Reference Pfitzer, Varrelmann, Schrameyer and Rostás2022b). The strongest signals appeared for adults that have the largest size and contain more COI templates. For the nymphal stage, L5 has the largest size and showed the strongest fluorescence signals (fig. 3a). This was reflecting the higher DNA concentration in adult samples (250 to 340 ng μl−1) compared with nymphs (65 to 80 ng μl−1) as we intentionally did not optimise the DNA concentration to directly detect and compare all life stages of the insect from individual DNA samples.
In addition, using crude template DNA, a comparable and specific P. leporinus detection was possible for adults (female and male) and nymphal stages (L3–L5). For the close cixiid species, R. quinquecostatus and H. obsoletus, no clear fluorescence signals (CT > 32) were detected (fig. 3a). Therefore, real-time PCR can be used for specific detection of P. leporinus adults and nymphs using crude DNA templates.
Optimising the real-time RPA conditions for specific P. leporinus detection
Application of real-time RPA based on a SYBR green assay was tested using P. leporinus specific primers and the TwistAmp Basic kit. This allows application of real-time RPA for detection of target genes without probe design and extra costs. This assay was initially tested on pure nucleic acids from P. leporinus and the two closely related species. Using a constant temperature of 39°C produced fluorescence signals for both P. leporinus adults and nymphs after a short incubation time (less than 10 min). However, background fluorescence signals also appeared for the nonspecific targets in both R. quinquecostatus and H. obsoletus samples after a longer time (more than 10 min) (fig. 4). Testing the real-time RPA products on agarose gel showed a clear amplification of COI gene only in P. leporinus samples, while no clear amplicons were detected in R. quinquecostatus and H. obsoletus samples even after 20 min. Thus, real-time RPA specifically amplifies the target COI gene exclusively in P. leporinus extracts. Based on the fluorescence plot data which included 14 runs and also agarose gel results, the detection threshold of the real-time RPA was established as equal to 10 cycles ( = 400 s) and the baseline to 200 relative fluorescence units (RFU) (fig. 4). Samples that produced exponential amplification curves above the threshold were considered as positive for P. leporinus and below the threshold were considered as negative. Detection of both adults and nymphal stages was confirmed in this assay (fig. 3b and 4). In addition, this detection threshold was applied to compare real-time RPA for detection of P. leporinus using crude nucleic acids from both adults and nymphs. Higher fluorescence signals were observed in pure nucleic acids from adults compare to crude nucleic acid, while fluorescence signals were comparable in both pure and crude nucleic acids of nymphs (fig. 3). Therefore, real-time RPA specifically detects P. leporinus in both pure and crude nucleic acids of adults and nymphs.
Comparison of sensitivity between real-time PCR and real-time RPA for P. leporinus detection
The sensitivity of real-time PCR was compared to real-time RPA using a ten-fold serial dilution of crude nucleic acid of individual P. leporinus adults and nymphs. In real-time PCR, COI gene from adults was detectable in dilution range from 1 × 10−1 to 1 × 10−4. However, this range was from 1 × 10−1 to 1 × 10−3 for nymphs (fig. 5a). This indicated that fluorescence signals after 30 cycles are not reliable and adult DNA contains more COI templates compared to nymphs. Similarly, in real-time RPA, COI gene from adults was detectable in dilution range from 1 × 10−1 to 1 × 10−4 and a lower level of COI gene (1 × 10−3 dilution) was detected in nymphs (fig. 5b). The signals after 10 units of time and below 200 RFU were not reliable and considered as no detection.
Discussion
Recently, a PCR method based on COI gene was developed to specifically identify and distinguish all life stages of P. leporinus from the two closely related planthopper species (Pfitzer et al., Reference Pfitzer, Varrelmann, Hesse and Eini2022a). In this study, we further developed a more rapid assay based on real-time RPA to identify and monitor P. leporinus in a short time and without the need for pure DNA extraction and gel electrophoresis.
Isothermal DNA amplification methods such as RPA (Piepenburg et al., Reference Piepenburg, Williams, Stemple and Armes2006) that works under ambient temperature (37–42°C) with short reaction time (5–20 min), considerable sensitivity and specificity, resistance to inhibitors and tolerance for more primer mismatches (Tan et al., Reference Tan, Liao, Liang, Yi, Zhou and Wei2022), increasingly was used for the detection and monitoring of pathogens (Li et al., Reference Li, Li, Fan, Zou, Zhang, Wang, Sun, Pan, Wu and Wang2018; Zhou et al., Reference Zhou, Zheng, Jiang, Liu, Zhang and Yan2022) and insects (Priti et al., Reference Priti, Jangra, Baranwal, Dietzgen and Ghosh2021). To detect the RPA products in end-point assays, agarose gel electrophoresis (Tran et al., Reference Tran, Tran, Pham and Phung2022) and lateral flow (Zhou et al., Reference Zhou, Zheng, Jiang, Liu, Zhang and Yan2022) have been used. For real-time detection, in most cases an exo-probe which is specific for TwistAmp exo kit has been applied (Li et al., Reference Li, Li, Fan, Zou, Zhang, Wang, Sun, Pan, Wu and Wang2018; Babujee et al., Reference Babujee, Witherell, Mikami, Aiuchi, Charkowski and Rakotondrafara2019). For example, real-time RPA assay was used for the rapid, simple, reliable, and sensitive detection of Campylobacter jejuni in food samples (Geng et al., Reference Geng, Liu, Liu, Deng, Zhao, Sun, Wang, Zhao and Wang2019). In addition, RPA reaction can be detected using DNA intercalating fluorophores such as SYBR Green I (Azinheiro et al., Reference Azinheiro, Roumani, Rodríguez-Lorenzo, Carvalho, Prado and Garrido-Maestu2022). However, due to non-specific interaction with double stranded DNA, this method produces false-positive results (Zou et al., Reference Zou, Mason and Botella2020). To avoid such errors, we developed a real-time based RPA which specifically detects the amplified target gene of P. leporinus in a short time (about 7 min) and does not require probe design or agarose gel electrophoresis, which can save time and costs.
RPA assays were shown to amplify DNA targets from impure DNA templates and crude extracts from plants (Londoño et al., Reference Londoño, Harmon and Polston2016; Qian et al., Reference Qian, Lu, Meng, Ye, Wang, Wang, Zheng, Wu and Wu2018; McCoy et al., Reference McCoy, Miles, Bilodeau, Woods, Blomquist, Martin and Chilvers2020) and insects (Priti et al., Reference Priti, Jangra, Baranwal, Dietzgen and Ghosh2021). Most reports have used general extraction buffer (McCoy et al., Reference McCoy, Miles, Bilodeau, Woods, Blomquist, Martin and Chilvers2020), Tris-EDTA, CTAB-Tris buffer or Tris-HCl as extraction buffer for template DNA preparation from plant tissue (Kalischuk et al., Reference Kalischuk, Roberts and Paret2020). In addition, PBS was also used for plant template DNA preparation (Kalischuk et al., Reference Kalischuk, Roberts and Paret2020). We have recently shown that PBS extracts from P. leporinus are suitable for the specific PCR-based detection of this insect vector (Pfitzer et al., Reference Pfitzer, Varrelmann, Hesse and Eini2022a). In this study, the PBS extracted samples were used for specific detection of both adults and nymphal stages of P. leporinus using real-time PCR and real-time RPA. In both assays, PBS extracts showed a comparable sensitivity of detection for both adults and nymphal stages. A ten-fold dilution of nucleic acids up to 10−6 for adult samples and up to 10−5 for nymph samples was still detectable in real-time PCR and real-time RPA assays, respectively. This confirms the sensitivity of real-time RPA for detection of P. leporinus even from a low concentration of nucleic acid samples which can be applied for detection of this insect vector from a mixture of cixiid planthoppers. An excellent correlation between real-time PCR and real-time RPA assays for detection of Human mastadenoviruses (HAdVs) (Wu et al., Reference Wu, Wu, Zhao, Hu, Ge, Zhu, Zhang, Zhou, Zhu and Cui2019), small ruminant morbillivirus (SRMV) (Li et al., Reference Li, Li, Fan, Zou, Zhang, Wang, Sun, Pan, Wu and Wang2018) and C. jejuni in food samples (Geng et al., Reference Geng, Liu, Liu, Deng, Zhao, Sun, Wang, Zhao and Wang2019) supports our results. Figure 3 shows that in the real-time PCR assay, the fluorescence intensity for both pure and crude nucleic acid were comparable in adult samples. However, a lower level of fluorescence signals was observed in nymphal crude samples. In the real-time RPA assay, the fluorescence intensity for both pure and crude nucleic acid were comparable in both adult and nymph samples. This may reflect the resistance to inhibitors by RPA assays compared to real-time PCR.
Rapid detection (ca 7 min) of P. leporinus using real-time RPA is the main advantage over real-time PCR. Similarly, the analysis time for monitoring food samples for C. jejuni by real-time RPA was reduced from 60 to approximately 13 min and the results were as reliable as those of the real-time PCR assay (Geng et al., Reference Geng, Liu, Liu, Deng, Zhao, Sun, Wang, Zhao and Wang2019). According to the kit instruction and published reports the optimised temperature is between 37 and 42°C for 15–20 min reaction time (Londoño et al., Reference Londoño, Harmon and Polston2016; McCoy et al., Reference McCoy, Miles, Bilodeau, Woods, Blomquist, Martin and Chilvers2020; Londono et al., Reference Londono, Ghasemi, Lawand and Dashti2021). However, at lower temperature as low as 25°C, RPA produced amplicons only at a longer incubation time (Wang et al., Reference Wang, Chen, Nie, Zhong, Li, Li, Huang, Fu, Liu and Nie2020). In contrast, the incubation time could be shortened to 5 min when the reaction temperature was 42°C (Lee et al., Reference Lee, Kim, Lee and Jeong2020; Kim et al., Reference Kim, Lee, Kim and Jeong2022). In this study, non-target insects produced weak fluorescence signals and non-specific curves with a clear delay. In both assays, the amplicon products were tested on agarose gel and showed no detectable products, which confirm the specificity of both assays. Such non-specific curves were also observed in non-target nematode samples (Subbotin, Reference Subbotin2019) and Fusarium oxysporum detection using real-time RPA assays (Zou et al., Reference Zou, Mason and Botella2020). Therefore, a defined threshold for the reaction period and RFU for real-time RPA assays need to be optimised during assay development to avoid false positive results. In conclusion, the developed real-time RPA allows a rapid and sensitive assay for specific detection of adults and nymphal stages of P. leporinus. This method can be further developed for field application and monitoring the main SBR vector in a short time (under 7 min). Such real-time RPA approach was successfully applied in the field for the rapid (under 15 min) and specific detection of Phytophthora sp. in various crops using lyophilised reagents (McCoy et al., Reference McCoy, Miles, Bilodeau, Woods, Blomquist, Martin and Chilvers2020) and for rapid and real-time detection of Xanthomonas gardneri and X. euvesicatoria the causal agents of bacterial spots in tomato plants in fields (Strayer-Scherer, Reference Strayer-Scherer2019).
Supplementary material
The supplementary material for this article can be found at https://doi.org/10.1017/S0007485324000099
Acknowledgements
We thank Z. Shoaei, J. Nienstedt and G. Hesse for their technical supports. This research was funded by Board of Trustees for sugar beet trials and advice (Kuratorium für Versuchswesen und Beratung im Zuckerrübenanbau; Mannheim, Germany) and the Institute of Sugar Beet Research, Goettingen.
Competing interests
None.