Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-24T08:34:38.244Z Has data issue: false hasContentIssue false
  • English
  • Français

Wide-band gain enhancement of a pyramidal horn antenna with a 3D-printed epsilon-positive and epsilon-near-zero metamaterial lens

Published online by Cambridge University Press:  18 December 2020

Nesem Keskin ,
Sinan Aksimsek Open the ORCID record for Sinan Aksimsek [Opens in a new window]  and
Nurhan Turker Tokan
Nesem Keskin
Affiliation:
Profen Communication Tech. R&D Center, Okmeydani Sisli 34384, Istanbul, Turkey
Sinan Aksimsek*
Affiliation:
Department of Electrics and Electronics Engineering, Istanbul Kultur University, Bakirkoy 34156, Istanbul, Turkey
Nurhan Turker Tokan
Affiliation:
Department of Electronics and Communication Engineering, Yildiz Technical University, Esenler 34220, Istanbul, Turkey
*
Author for correspondence: Sinan Aksimsek, E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

In this article, we present a simple, low-cost solution for the gain enhancement of a conventional pyramidal horn antenna using additive manufacturing. A flat, metamaterial lens consisting of three-layer metallic grid wire is implemented at the aperture of the horn. The lens is separated into two regions; namely epsilon-positive and epsilon-near-zero (ENZ) regions. The structure of the ENZ region is constructed accounting the variation of relative permittivity in the metamaterial. By the phase compensation property imparted by the metamaterial lens, more focused beams are obtained. The simulated and measured results clearly demonstrate that the metamaterial lens enhances the gain over an ultra-wide frequency band (10–18 GHz) compared to the conventional horn with the same physical size. A simple fabrication process using a 3D printer is introduced, and has been successfully applied. This result represents a remarkable achievement in this field, and may enable a comprehensive solution for satellite and radar systems as a high gain, compact, light-weighted, broadband radiator.

Keywords

Antenna designepsilon-near-zerometa-materials and photonic bandgap structuresmodeling and measurements
Type
Metamaterials and Photonic Bandgap Structures
Information
International Journal of Microwave and Wireless Technologies , Volume 13 , Issue 10 , December 2021 , pp. 1015 - 1023
Check for updates
Copyright
Copyright © The Author(s), 2020. Published by Cambridge University Press in association with the European Microwave Association

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Balanis, C Antenna Theory, 3rd Edn. USA: John Wiley & Sons, 1997, 2005.Google Scholar
Hrabar, S, Bonefacic, D and Muha, D (2007) Numerical and experimental investigation of horn antenna with embedded ENZ metamaterial lens. ICECom International Conference, Dubrovnik, CR, Sep 2007, pp. 1–4.CrossRefGoogle Scholar
Wu, Q, Pan, P, Meng, F, Li, L-W and Wu, J (2007) A novel flat lens horn antenna designed based on zero refraction principle of metamaterials. Applied Physics A: Solids and Surfaces 87, 151–156.CrossRefGoogle Scholar
Hrabar, S, Bonefacic, D and Muha, D (2008) ENZ-based shortened horn antenna: an experimental study. Proceedings of IEEE AP-S International Symposium, SanDiego, CA, Jul 2008, pp. 1–4.CrossRefGoogle Scholar
Hrabar, S, Damir, M and Sipus, Z (2010) Optimization of wire-medium based shortened horn antenna. Proceedings of EuCAP2010, Barcelona, SP, Apr 2010, pp. 1–4.Google Scholar
Hrabar, S, Bonefacic, D and Muha, D (2009) Application of wire-based metamaterials for antenna miniaturization. Proceedings of EuCAP2009, Berlin, Mar 2009, pp. 620–623.Google Scholar
Veselago, VG (1968) The electrodynamics of substances with simultaneously negative values of \varepsilon and μ. Soviet Physics Uspekhi 10, 509–514.CrossRefGoogle Scholar
Smith, WJ, Padilla, DC, Vier, SC, Nemat-Nasser, C and Schultz, S (2000) Composite medium with simultaneously negative permeability and permittivity. Physical Review Letters 84, 4184–4187.CrossRefGoogle ScholarPubMed
Valentine, J, Zhang, S, Zentgraf, T, Ulin-Avila, E, Genov, DA, Bartal, G and Zhang, X (2008) Three-dimensional optical metamaterial with a negative refractive index. Nature 455, 376–379.CrossRefGoogle ScholarPubMed
Jackson, JD (1998) Classical Electrodynamics, 3rd Edn. USA: Wiley.Google Scholar
Ramaccia, D, Scattone, F, Biotti, F and Toscano, (2013) Broadband compact horn antennas by using EPS-ENZ metamaterial lens. IEEE Transactions on Antennas and Propagation 61, 2929–2937.CrossRefGoogle Scholar
Huang, B, Li, L-, Sun, H, Sun, Y and Tong, R (2017) Design of 77 GHz half-shorted horn antenna with metamaterial lens. Microwave and Optical Technology Letters 59, 1755–1759.CrossRefGoogle Scholar
Yi, H, Qu, SW, Ng, KB, Chan, C H and Bai, X (2016) 3-D Printed millimeter-wave and terahertz lenses with fixed and frequency scanned beam. IEEE Transactions on Antennas and Propagation 64, 442–449.CrossRefGoogle Scholar
Zhang, B, Zhan, Z, Cao, Y, Gulan, H, Linner, P, Sun, J, Zwick, T and Herbert, Z (2016) Metallic 3-D printed antennas for millimeter- and submillimeter wave applications. IEEE Transactions on Terahertz Science and Technology 6, 592–600.CrossRefGoogle Scholar
García-Vigueras, M, Menargues, E, Debogovic, T, Rijk, E and Mosing, JR (2017) Cost-effective dual-polarised leaky-wave antennas enabled by three-dimensional printing. IET Microwaves, Antennas & Propagation 11, 1985–1991.CrossRefGoogle Scholar
Qian, J, Tang, M, Zhang, Y-P and Junja, M (2020) Heatsink antenna array for millimeter-wave applications. IEEE Transactions on Antennas and Propagation 68, 7664–7669.CrossRefGoogle Scholar
Zhang, YX, Jiao, YC and Bin, LS (2018) 3-D-printed comb mushroom-like dielectric lens for stable gain enhancement of printed log-periodic dipole array. IEEE Antennas and Wireless Propagation Letters 17, 2099–2103.CrossRefGoogle Scholar
Li, Y, Ge, L, Wang, J, Da, S, Cao, D, Wang, J and Liu, Y (2019) 3-D printed high-gain wideband waveguide fed horn antenna arrays for millimeter-wave applications. IEEE Transactions on Antennas and Propagation 67, 2868–2877.CrossRefGoogle Scholar
Li, Y, Ge, L, Chen, M, Zhang, Z, Li, Z and Wang, J (2019) Multibeam 3-D-printed Luneburg lens fed by magnetoelectric dipole antennas for millimeter-wave MIMO applications. IEEE Transactions on Antennas and Propagation 67, 2923–2933.CrossRefGoogle Scholar
Jeong, KH and Ghalichechian, N (2020) 3D-printed 4-zone Ka-band Fresnel lens: design, fabrication, and measurement. IET Microwaves, Antennas & Propagation 14, 28–35.CrossRefGoogle Scholar
Zhang, B, Guo, YX, Guo, Q, Wu, L, Ng, KB, Wong, H, Zhou, Y and Huang, K (2019) Dielectric and metallic jointly 3D-printed mmwave hyperbolic lens antenna. IET Microwaves, Antennas & Propagation 13, 1934–1939.CrossRefGoogle Scholar
Castro, AT, Babakhani, B and Sharma, SK (2017) Design and development of a multimode waveguide corrugated horn antenna using 3D printing technology and its comparison with aluminium-based prototype. IET Microwaves, Antennas & Propagation 11, 1977–1984.CrossRefGoogle Scholar
Lomakin, K, Pavlenko, T, Ankenbrand, M, Sippel, M, Ringel, J, Scheetz, M, Klemm, T, Graf, D, Helmreich, K, Franke, J and Gold, G (2018) Evaluation and characterization of 3-D printed pyramid horn antennas utilizing different deposition techniques for conductive material. IEEE Transactions on Components, Packaging, and Manufacturing Technology 8, 1998–2006.CrossRefGoogle Scholar
Alù, A, Silveirinha, MG, Salandrino, A and Engheta, N (2007) Epsilon-near-zero metamaterials and electromagnetic sources: tailoring the radiation phase pattern. Physical Review B: Condensed Matter and Materials Physics 75, 15.CrossRefGoogle Scholar
Niu, X, Hu, X, Chu, S and Gong, Q (2018) Epsilon-Near-Zero Photonics: A New Platform for Integrated Devices. Advanced Optical Materials 6(10).CrossRefGoogle Scholar
Ciattoni, A, Rizza, C and Palange, E (2010) Transmissivity directional hysteresis of a nonlinear metamaterial slab with very small linear permittivity. Optics Letters 35, 1–4.CrossRefGoogle ScholarPubMed
Rutgers School of Engineering website, Available at https://www.ece.rutgers.edu/~orfanidi/ewa/, June 2004.Google Scholar
Pendry, JB, Holden, AJ, Stewart, WJ and Youns, II (1996) Extremely low frequency plasmons in metallic mesostructures. Physical Review Letters 76, 4773–4776.CrossRefGoogle ScholarPubMed
Li, Z, Liu, Z and Aydin, K (2007) Wideband zero-index metacrystal with high transmission at visible frequencies. Journal of the Optical Society of America B: Optical Physics 34, D13.CrossRefGoogle Scholar
Chen, X, Ma, HF, Zou, XY, Jiang, WX and Cui, TJ (2011) Three-dimensional broadband and high-directivity lens antenna made of metamaterials. JOSA B. 110, 1–8.Google Scholar
CST Microwave Studio, Available at http://www.cst.com, CST GmbH, Darmstadt, Germany.Google Scholar
Garcia, CR, Rumpf, RC, Tsang, HH and Barton, JH (2013) Effects of extreme surface roughness on 3D printed horn antenna. Electronics Letters 49, 734–736.CrossRefGoogle Scholar
Byford, JA, Ghazali, MIM, Karuppuswami, S, Wright, BL and Chahal, P (2017) Demonstration of RF and microwave passive circuits through 3-D printing and selective metalization. IEEE Transactions on Components, Packaging, and Manufacturing Technology 7, 463–471.CrossRefGoogle Scholar
Jun, SY, Elibiary, A, Sanz-Izquierdo, B, Winchester, L, Bird, D and McCleland, A (2018) 3-D Printing of conformal antennas for diversity wrist worn applications. IEEE Transactions on Components, Packaging, and Manufacturing Technology 8, 2227–2235.CrossRefGoogle Scholar