1. Introduction
The body fossil record of Late Triassic non-marine tetrapods from the UK is limited and most of our knowledge of these taxa comes from one of three sources: the diverse microvertebrate faunas recovered from fissure fill deposits in the Bristol Channel region of England and Wales (Fraser & Sues, Reference Fraser and Sues1994; Benton & Spencer, Reference Benton and Spencer1995; Whiteside et al. Reference Whiteside, Duffin, Gill, Marshall and Benton2016); a series of taxa preserved largely as natural moulds in the Lossiemouth Formation of Elgin, Scotland (Newton, Reference Newton1893; Benton & Walker, Reference Benton and Walker1985); and as rare, usually isolated, elements from a few localities in SW England and Wales (Storrs, Reference Storrs1994; Galton, Reference Galton1998, Reference Galton2005; Redelstorff, Reference Redelstorff2012; Martill et al. Reference Martill, Vidovic, Howells and Nudds2016). Known tetrapod diversity includes temnospondyls, mammaliaforms, procolophonids, rhynchosaurs, trilophosaurids, drepanosaurids, a variety of lepidosauromorphs (rhynchocephalians and several stem-taxa), choristoderes, several pseudosuchian archosaurs (phytosaurs, aetosaurs, crocodylomorphs) and various avemetatarsalians (including sauropodomorph and theropod dinosaurs; Rauhut & Hungerbühler, Reference Rauhut and Hungerbühler2000; Galton, Reference Galton2005; Galton & Kermack, Reference Galton and Kermack2010) although many of these, particularly the larger-bodied taxa, are known only from limited material. Taken together, these localities span the Carnian–Rhaetian stages and a range of palaeoenvironments, but the majority are currently thought to be of Rhaetian age (Whiteside et al. Reference Whiteside, Duffin, Gill, Marshall and Benton2016; Lovegrove et al. Reference Lovegrove, Newell, Whiteside and Benton2021).
Several Late Triassic UK sites preserve ichnofossil assemblages that complement the skeletal record, demonstrating the presence of various trackmakers in either areas or stratigraphic levels where there is little or no bone preservation. The tetrapod ichnofossil record from this time in the UK is mostly attributed to small- to medium-sized trackmakers. These include rare Carnian records from the Lossiemouth Formation and the Arden Sandstone Formation of Warwickshire, usually attributed to either synapsids or crocodylomorphs (Tresise & Sarjeant, Reference Tresise and Sarjeant1997), and isolated tracks from Aust, Gloucestershire that may have been made by therapsids (Larkin et al. Reference Larkin, Duffin, Dey, Stukins and Falkingham2020).
The most important track assemblage, however, comes from the Norian–Rhaetian-aged Mercia Mudstone Group of south Wales (Sollas, Reference Sollas1879; Thomas, Reference Thomas1879; Tucker & Burchette, Reference Tucker and Burchette1977; Lockley et al. Reference Lockley, King, Howe and Sharp1996; Lockley & Meyer, Reference Lockley and Meyer2000; Lockley, Reference Lockley2006). The marginal facies in which these assemblages occur cannot be attributed to a particular formation within the group (Howard et al. Reference Howard, Warrington, Ambrose and Rees2008), but tracks are known from three areas along the northern coast of the Severn Estuary, including Newton Nottage near Porthcawl and the Bendricks and Sully areas south of Cardiff. The most comprehensive account to date on these occurrences was published by Lockley et al. (Reference Lockley, King, Howe and Sharp1996), who reported a minimum of 88 trackways from about 10 stratigraphic levels that mostly pertain to tridactyl theropod dinosaurs. In addition, these authors discussed 16 bipedal trackways of tetradactyl morphology assigned to Pseudotetrasauropus (now Evazoum; see Nicosia & Loi, Reference Nicosia and Loi2003) as well as four quadrupedal trackways assigned to Tetrasauropus (now Eosauropus; see Lockley et al. Reference Lockley, Lucas and Hunt2006). Both types were possibly made by sauropodomorph dinosaurs, although a chirotheroid affinity was also discussed.
Here, we add to this record by describing a series of features that we interpret as Late Triassic tetrapod tracks from the Blue Anchor Formation (Mercia Mudstone Group) situated on the foreshore near Penarth, South Glamorgan, Wales.
2. Brief history of study
The tracks have been exposed intermittently over the past decade (and certainly long before this; Thomas, Reference Thomas1879), and the presence of these features was noted by several members of the public over this time, some of whom contacted the National Museum of Wales (Cardiff) and Cardiff University. However, to the best of our knowledge, JEM and GS were the first to attempt formal documentation of the site in 2009, with other teams led by LC and colleagues, CH and colleagues, and Chris Berry (Cardiff University) and colleagues, also mapping and examining the site subsequently. These teams developed different models for the formation of these features, with JEM/GS regarding the structures as tracks and LC, CH and others regarding the structures as ambiguous, and potentially of abiotic origin (see Section 6 for Discussion). However, although this work formed the basis for various student projects, it remained unpublished and was not discussed or disseminated more widely. Following a query from a member of the public to the Natural History Museum, PLF, SCRM and PMB visited the site in August 2020, unaware that other researchers had previously made independent assessments. However, consultation with CH and LC during and after this visit provided more background information on the history of study and led to the current collaboration. Given the exposed and publicly accessible situation of the site, it is highly likely that others have also examined it, although we are unaware of any other formal documentation attempts or any record of this site in the literature.
3. Material and methods
3.a. Geological setting
The tracks occur on a single surface at the top of a 15-cm-thick grey, dolomitic siltstone. Small gypsum nodules occur near the top of the bed. The tracks are deeply impressed into the top surface and are partially infilled with a green siltstone with orange stringers. In the summer of 2020, the beds immediately above and below the track layer were unexposed and covered in pebbles and boulders, but the beds that were exposed on the beach appear to show a cyclical pattern of dolomitic mudstones, siltstones and limestones with gypsum nodules, similar to the track layer. These beds are attributable to the Blue Anchor Formation of the Mercia Mudstone Group, and those exposed on the beach are c. 5 m below the top of the Blue Anchor Formation. The Blue Anchor Formation has generally been considered to be late Norian–early Rhaetian in age (Howard et al. Reference Howard, Warrington, Ambrose and Rees2008). At St Audrie’s Bay (Somerset), the Blue Anchor Formation records a reversed polarity event and was tentatively assigned to the Norian stage using comparisons with the composite magnetostratigraphic polarity pattern of Tethyan marine sites (Hounslow et al. Reference Hounslow, Posen and Warrington2004). However, subsequent magnetostratigraphic studies of marine sites recording the Norian–Rhaetian transition in Austria have suggested that beds of the Blue Anchor Formation with reversed polarity are more likely to be entirely Rhaetian in age (Hounslow & Muttoni, Reference Hounslow and Muttoni2010; Hüsing et al. Reference Hüsing, Deenen, Koopmans and Krijgsman2011). Accordingly, the Blue Anchor Formation, and hence the tracks reported here, are most likely to be Rhaetian in age, especially given their stratigraphic location at the top of the Blue Anchor Formation.
The greenish-grey silty dolomitic mudstone beds of the Blue Anchor Formation have been interpreted as mostly subaqueous evaporitic lacustrine deposits with occasional marine influence, representing the early stages of the Rhaetian marine transgression (Tucker & Burchette, Reference Tucker and Burchette1977; Tucker, Reference Tucker and Tucker1978; Mayall, Reference Mayall1981; Howard et al. Reference Howard, Warrington, Ambrose and Rees2008; Suan et al. Reference Suan, Föllmi, Adatte, Bomou, Spangenberg and Van De Schootbrugge2012). In the Penarth Bay area, there is a gradual transition between the Branscombe Mudstone Formation, a succession predominantly composed of red-brown silty dolomitic mudstone with gypsum nodules and veins deposited in a lacustrine setting, and the greenish-grey silty mudstone of the Blue Anchor Formation. This lithological transition is considered to record a shift from arid to less arid climatic conditions (Howard et al. Reference Howard, Warrington, Ambrose and Rees2008; Suan et al. Reference Suan, Föllmi, Adatte, Bomou, Spangenberg and Van De Schootbrugge2012). The tracks were thus formed under predominantly semi-arid conditions on a low-lying mudflat alongside a marine-influenced lake that was prone to periodic shoreline retreat and sub-aerial exposure.
3.b. Locality description
The track surface is exposed on the beach approximately 1 km south of Penarth pier (Fig. 1; 51.4253° N, –3.1710° W). This beach is usually covered in loose material (ranging in size from sand to small boulders) but, on rare occasions, exceptionally high tides strip away this overlying sediment to expose the surface.
The exposure documented in August 2020 consisted of two exposures of the same bedding surface; the northern being c. 30 m in length and c. 2 m wide, and the southern being c. 20 × 2 m. The two exposed surfaces are offset c. 10 m by a non-contemporaneous fault trending 052° across the beach, downthrown to the south (Fig. 2). Areas were brushed down prior to photography and measurement. Cleaning efforts during 2020 were focused on the northern section, but local tides constrained the time available for exposing and mapping the site, hence only a narrow strip was exposed. The bedding surface continues to the west beneath surficial sediment and overlying strata.
4. Photogrammetry and historical site assessment
During the summer of 2020, both exposed surfaces were recorded via photogrammetry with a total of 1386 photos taken using a Sony Nex-6 (16 mp) and 16–50 mm lens. Photogrammetric models were produced using AliceVision Meshroom v. 2019.2, then analysed and visualized using Blender v. 2.91.
During mapping in 2009, in addition to clearing and documenting the site via traditional means, JEM and GS took 285 photographs of what we label here the southern exposure, with a Pentax K10D (10 mp). These photographs were used here to generate a photogrammetric model (via AliceVision Meshroom v. 2019.2) using ‘historical’ or ‘post-hoc’ photogrammetry, that is, where photographs taken in the past, without the intention of creating 3D models, are used for photogrammetric reconstruction (Falkingham et al. Reference Falkingham, Bates and Farlow2014, Reference Falkingham, Bates, Avanzini, Bennett, Bordy, Breithaupt, Castanera, Citton, Díaz-Martínez, Farlow, Fiorillo, Gatesy, Getty, Hatala, Hornung, Hyatt, Klein, Lallensack, Martin, Marty, Matthews, Meyer, Milàn, Minter, Razzolini, Romilio, Salisbury, Sciscio, Tanaka, Wiseman, Xing and Belvedere2018; Lallensack et al. Reference Lallensack, Sander, Knötschke and Wings2015). The availability of two digital models (Fig. 3) produced from photographs taken over a decade apart provided a valuable opportunity to examine the extent of loss of the surface due to erosion, and to provide supplementary detail on the morphology of these features prior to this period of additional weathering and erosion. All data, photographs and models are available from Figshare (https://doi.org/10.6084/m9.figshare.14604567).
5. Description
The impressions are highly variable in shape and size (Fig. 4). They are all highly weathered, exhibiting both broken and smoothed surfaces, breakage being facilitated by numerous diaclases in the bedding plane. They are roughly circular to elliptical in outline, and almost entirely lack clear impressions of either individual digits, claws or footpads (but see below). They range over 20–60 cm in maximum diameter. Depth is likewise variable, but ranges mainly over 5–10 cm. Almost all of the depressions are surrounded by significant asymmetrical displacement rims that are often similar in height to the depth of the track, and that extend laterally from the tracks to make the maximum zone of deformation approximately 1.5–2 times the size of the area of negative displacement (Manning, Reference Manning2004; Falkingham, Reference Falkingham, Falkingham, Marty and Richter2016). The displacement rims are variable in height and width along the outline of the footprints, which is consistent with similarly pronounced displacement rims that have been recorded from other dinosaur tracksites (e.g. Farlow et al. Reference Farlow, O’Brien, Kuban, Dattilo, Bates, Falkingham, Piñuela, Rose, Freels, Kumagai, Libben, Smith and Whitcraft2012, fig. 15A).
The footprint outlines are highly irregular, but some impressions do reveal possible anatomical information. Indentations into the inner sides of the displacement rims can generally be attributed to the removal of chunks of rock by erosion and subsequent smoothing by weathering. However, in other cases, such indentations are distinctly caused by undulations of the displacement rims, although these are not necessarily related to foot anatomy (e.g. Marty et al. Reference Marty, Strasser and Meyer2009, fig. 6). Nevertheless, at least some of the structures (Figs 3c, d, 4c, d) exposed in 2009 possessed regularly spaced indentations that are consistent in size and shape and which we interpret as digit impressions. Unfortunately, these tracks lost almost all of this detail in the intervening years due to erosion (Fig. 3c, d).
Tracks are distributed unevenly and for the most part without association. Several large and complex impressions are subdivided by shallow rims and might have been formed by partly overlapping impressions. The northernmost exposure has two sequences of tracks that appear to be arranged in lines with semi-regular spacing. Measuring from the centre of each depression, the northernmost sequence (Fig. 5) consists of 5–6 impressions 1.1–1.3 m apart (from north to south: 1.08, 1.13, 1.19 and 1.28 m). The second sequence of tracks on this exposure consists of 6–8 impressions, spaced 1.2–1.5 m apart (1.24, 1.27, 1.13, 1.33 and 1.53 m, from north to south or top to bottom in Fig. 3). The sequences are not contiguous on the exposed surface, but could conceivably extend and connect beneath the overburden. It is possible that these impressions form trackways, although the irregularity in spacing and the size variation of tracks makes this interpretation tentative.
All of the tracks exposed in 2020 were heavily distorted by weathering and erosion, and were often missing large parts from their displacement rims and interiors (Fig. 4). Tracks visible only in the 2009 dataset were of a similar level of preservation (sensu stricto; see Falkingham & Gatesy, Reference Falkingham and Gatesy2020) to those visible in 2020. The few tracks visible in both 2009 and 2020 showed reduction in their displacement rims and shallowing in line with the simulated weathering experiments conducted by Henderson (Reference Henderson2006), and also displayed some breakage of the rim, creating a jagged rather than smooth surface (Fig. 3).
Both exposures exhibited a high density of impressions. The heavy erosion, combined with the lack of anatomical detail, makes it difficult to unambiguously identify all of the impressions present as tracks (see Section 6 for Discussion). There are also many instances of overprinting, which makes an accurate count of individual tracks difficult. Nevertheless, track density is clearly high, with > 40 impressions on the southern surface and > 60 impressions on the northern surface (Fig. 2), equating to approximately four tracks per square metre of exposed surface.
6. Discussion
6.a. Are they tracks? Alternative explanations?
Because the surface lacks unequivocal evidence of detailed foot anatomy or trackways, alternative formational mechanisms for these impressions should be considered.
The dense distribution, asymmetric raised rims and sunken floors of the roughly circular impressions raise questions of expansion and collapse of sediment. The role of gypsum in their formation might provide an explanation. Directly beneath this bed, and in others through the sequence, there are layers of gypsum nodules and dissolution cavities. Rimmed impressions are also present in other beds on the foreshore, although these are not as pronounced as on the main bed described here. Volume changes caused by the hydration and drying of evaporitic minerals (63%; Azam, Reference Azam2007) in the semi-arid desert and lake edge environments envisaged for these beds might result in the bulging and collapse of overlying sediment. Notably, nodules fill, and sometimes line, impressions that are similar in size and spacing to the possible tracks, some of which are rimmed (see supplementary material at https://doi.org/10.6084/m9.figshare.14604567). Another possible process could involve the shallow liquefaction of uncompacted muddy sediment to form mud volcanoes, perhaps seismically induced in these Late Triassic environments (Mayall, Reference Mayall1983; Simms, Reference Simms2003, Reference Simms2007; Laborde-Casadaban et al. Reference Laborde-Casadaban, Homberg, Schnyder, Borderie and Raine2021). Both alternatives might result in a random distribution of rimmed pits or lead to some alignment of structures relating to the deformational setting. While not ruling out dinosaur trackways, these processes also merit consideration, not least to see whether there are discernible differences between the impressions regarded here as tracks and others.
As an alternative hypothesis, could the impressions be moulds of gypsum nodules that have since eroded away? We found no evidence of gypsum remaining within any of the exposed impressions interpreted here as tracks, either in 2009 or 2020. It is conceivable, although unlikely, that gypsum did previously reside within these impressions and has been completely removed through erosion, unlike those on the exposed part of the underlying bed. However, even if gypsum were originally present in the tracks, it may be possible that the impression came first, and the nodules formed within them, nucleating around the disturbance, rather than nodule formation creating the sediment deformation. Finally, in cases where two impressions are overlapped/beside each other, the displacement rims on one impression overwrite the other, implying a sequential forming of impressions while the first impression is empty. This strongly suggests that the impression formation is not related to gypsum formation.
Another possible origin for the impressions is that they are fish-feeding traces. Such traces have been repeatedly confused with tetrapod tracks in the past, particularly those of sauropods (Martinell et al. Reference Martinell, De Gibert, Domènech, Ekdale and Steen2001; Lucas, Reference Lucas2015). Fish-feeding traces can be aligned in rows that can resemble trackways (Lucas, Reference Lucas2015), and may show digit-like impressions at one end as well as smaller displacement rims (e.g. Pearson et al. Reference Pearson, Gingras, Armitage and Pemberton2007, fig 2). Belvedere et al. (Reference Belvedere, Franceschi, Morsilli, Zoccarato and Mietto2011) described a site of fish-feeding traces that was initially interpreted as a tetrapod tracksite. These authors noted that the regular spacing and lack of displacement rims were indicators that the impressions were not tetrapod tracks. At Penarth, the strongly pronounced displacement rims as well as the excessive overprinting and irregular distribution are good indicators that the impressions are not fish-feeding traces.
We consider the uneven outlines of the impressions, their large asymmetric displacement rims, and their arrangement and distribution to be, on balance, evidence supporting their interpretation as tetrapod tracks.
6.b. Possible trackmakers
The highly weathered condition of the vast majority of the tracks makes it difficult, or even impossible, to determine if they were all made by the same taxon, or by several species. The size range of the impressions indicates strongly that the surface was traversed by more than one trackmaker. Small and large tracks could represent manus and pes impressions, but small and large impressions do not appear to be associated consistently. Assuming the semi-regularly spaced impressions described above (Fig. 5) do constitute trackways, they were likely made by bipeds because they are incredibly narrow-gauged. The shorter, northernmost trackway exhibits a consistent pace angulation of 140° (138–143°), which is not unreasonable for a bipedal trackway. The longer sequence is more linear, with pace angulations of 170–180°; however, a trackmaker of this size producing such a narrow gait is unknown from the Triassic Period. It is more likely that the site is a trample ground, with tracks covering 33–70% of the surface (see below), and any perceived trackway associations between tracks are coincidental.
Features that might correspond to digit impressions are visible in several of the footprints (Fig. 4), but only one example, from 2009, retains enough definition that we can confidently attribute the morphology to anatomical detail. This footprint (Fig. 3c, d) is subtriangular, with four claw impressions extending from the front margin, which we interpret as digits I–IV. Digit impressions II–III project slightly beyond digit impressions I and IV, and have a distinct triangular outline with their distal tips pointing towards the side. The pedal digits were therefore likely flexed so that the sides of the claws were impressed. These track features closely match the pes impressions of trackways attributed to the ichnogenus Eosauropus, known from the Bendricks area nearby, which had previously been ascribed to Tetrasauropus (Lockley et al. Reference Lockley, King, Howe and Sharp1996, figs 7, 8). Comparison with the Bendricks material suggests that the claw impressions in our example are deflected laterally, in which case it would be the impression of the left pes. We do note, however, that the original Tetrasauropus material from Lesotho shows medially deflected claw impressions (Ellenberger, Reference Ellenberger1972; Klein & Lucas, Reference Klein and Lucas2021); this possibility cannot therefore be fully excluded for the Penarth material in the absence of associated tracks constituting a trackway.
The tracks described here differ from other tracks ascribed to Eosauropus in their remarkable size. Footprint length in the Eosauropus holotype is 21.7 cm (Lockley et al. Reference Lockley, Lucas and Hunt2006), while the largest known examples are 41–42 cm in length (Lallensack et al. Reference Lallensack, Klein, Milàn, Wings, Mateus and Clemmensen2017; Xing et al. Reference Xing, Ba, Lockley, Klein, Yan, Romilio, Chou and Persons2018). The single unambiguous footprint from Penarth (Fig. 3c, d) measures 65 cm in length, and its front margin, measured along the visible digit impressions, is 55 cm in width. Although the size of the present footprint is somewhat increased due to interior erosion of the displacement rims, it is by some margin the largest reported Eosauropus track.
Examples of Eosauropus are thought to have been made by sauropod-like dinosaurs, based on their similarity to post-Triassic sauropod tracks (Lockley et al. Reference Lockley, Lucas and Hunt2006) and the presence of several inferred skeletal synapomorphies (Lallensack et al. Reference Lallensack, Klein, Milàn, Wings, Mateus and Clemmensen2017; Wilson, Reference Wilson2005). These synapomorphies include quadrupedal posture, the entaxonic pes structure with an extensive pedal pad that indicates a semi-digitigrade posture, and the laterally deflected claws. A pronounced outward rotation of the pes impressions is also considered to be characteristic of sauropods. Tetrasauropus from Lesotho is similar to Eosauropus, but has medially deflected claws and only a weak outward rotation of the pes (Klein & Lucas, Reference Klein and Lucas2021); these tracks possibly relate to sauropodomorphs more basal than the producers of Eosauropus (Sander & Lallensack, Reference Sander and Lallensack2018). This specific Penarth track is therefore attributed to a sauropodomorph, and probably sauropodiform, trackmaker based on its deflected claws and entaxonic pes structure. Several early sauropodomorph taxa have been recorded from the Rhaetian of the UK, including this area of Wales (Galton & Kermack, Reference Galton and Kermack2010). The generally large size of the Penarth tracks may be consistent with the largest of these taxa, Camelotia (Galton, Reference Galton1998), which is regarded as close to the origin of true sauropods. However, a lack of anatomical fidelity within the tracks, combined with a lack of autopodial remains, makes any definitive assignation impossible.
6.c. Formational mechanisms and comparison with modern tracks
Trample grounds are not uncommon in the dinosaur ichnological record, or for other trackmakers, extinct and extant (Marty et al. Reference Marty, Hug, Iberg, Cavin, Meyer and Lockley2003; Da Silva et al. Reference Da Silva, De Souza Carvalho and Schwanke2007; Mezga et al. Reference Mezga, Tešović and Bajraktarević2007; Marty, Reference Marty2008; Richter & Bohme, Reference Richter, Bohme, Falkingham, Marty and Richter2016; Lallensack et al. Reference Lallensack, Ishigaki, Lagnaoui, Buchwitz and Wings2018). Sites such as the Penarth tracksite, where numerous tracks occur in high densities and are close to or even overprinting each other, would be given a moderate to heavy ‘dinoturbation index’ following Lockley & Conrad (Reference Lockley and Conrad1989). Such highly ‘dinoturbated’ sites can occur along herd movement paths (e.g. following the edge of a body of water, or along a migration trail), in which case the majority of tracks will be oriented in the same direction. Trample sites are also likely to occur beside bodies of water, either flowing or still, where animals congregate to drink. In these cases, the density of trackmakers is significantly increased over time, drawing animals from a much larger area than would otherwise be recorded in a tracksite. Animals will move to, from and around the body of water, leaving tracks in all directions. Additionally, the sediment conditions required for track formation are ideal. Particularly in an arid or semi-arid environment, as is interpreted to be the case when the Penarth tracks were made, sediment around a body of water will span the gamut from completely dry to completely saturated. Between these end points lies a ‘Goldilocks’ zone, where the sediment is soft enough to deform underfoot, but firm enough to retain its shape after foot withdrawal (Falkingham et al. Reference Falkingham, Bates, Margetts and Manning2011, Reference Falkingham, Bates and Farlow2014). Given the narrow exposure and lack of anatomical details, it is difficult to draw conclusions about the number of trackmakers, or the extent of the trampled area.
Modern tracksites beside bodies of water have previously been figured in the literature and used as analogues for fossil sites (Laporte & Behrensmeyer, Reference Laporte and Behrensmeyer1980). We add to this existing literature by presenting in Figure 6 a trample ground made by cattle in mud, beside a small flowing stream. Photographs were also collected for photogrammetric reconstruction, but the presence of water made 3D reconstruction difficult, and so only a photo is presented here (photographs and 3D model are available; see supplementary data at https://doi.org/10.6084/m9.figshare.14604567).
The size of the cow tracks varies significantly across the site, ranging over 10–20 cm, although cattle of approximately consistent size were the only possible trackmakers. Tracks are generally larger when located beneath the water’s surface. The tracks were not observed at the time of formation, so it is unknown whether the larger impressions were formed underwater, or if they were inundated post-formation. The larger size of tracks is likely due to reduced friction and cohesion within the saturated sediment, which is able to collapse into bowl-shaped depressions, while retaining a significant displacement rim. Further away from the water, in the firmer substrate, displacement rims are taller and overall track size is smaller.
The general form of the cow tracks in Figure 6, particularly those near or under the water, is very similar to those recorded from Penarth in that tracks lack distinct features or sharp edges, but retain displacement rims including in overprinted impressions. Definitive trackways cannot be identified, because track density is so high and because trackmakers were likely not moving with consistent speed, and therefore consistent stride length, in this area. We consider this an approximate taphonomic analogue for the Penarth tracks. While the feet and tracks of cows are very different from those of dinosaurs, the mechanics of sediment flow and deformation are the same, and so we present this comparative example to illustrate a possible mechanism that might produce tracks like those at Penarth.
6.d. Extent of weathering and erosion since 2009
It was fortunate that a large number of photographs were taken during the fieldwork carried out in 2009, enabling the construction of a 3D digital model. When the two models are aligned and overlain, the extent of loss of the surface is immediately apparent. In little over a decade, the originally exposed surface has been reduced in size by c. 50% (Fig. 2), and the remaining portion of the surface has suffered significant erosion and weathering of track morphology to the point that previously present anatomical detail (i.e. digit impressions) have almost completely disappeared. Unlike body fossils, collection of tracks – and particularly tracksites – can be difficult or even impossible, and they are usually left in situ. Conservation of such fossil resources is difficult, however, particularly in localities such as this where wave action and public access can rapidly degrade the fossils. A partial solution to this lies in modern 3D digital documentation, either through photogrammetry or laser scanning (Bates et al. Reference Bates, Breithaupt, Falkingham, Matthews, Hodgetts and Manning2009 a, b, Reference Bates, Rarity, Manning, Hodgetts, Vila, Galobart and Gawthorpe2008; Breithaupt & Matthews, Reference Breithaupt and Matthews2001; Breithaupt et al. Reference Breithaupt, Matthews and Noble2004, Reference Breithaupt, Southwell, Adams and Matthews2006; Falkingham, Reference Falkingham2012; Farlow et al. Reference Farlow, O’Brien, Kuban, Dattilo, Bates, Falkingham, Piñuela, Rose, Freels, Kumagai, Libben, Smith and Whitcraft2012; Bennett et al. Reference Bennett, Falkingham, Morse, Bates and Crompton2013; Matthews et al. Reference Matthews, Noble, Breithaupt, Falkingham, Marty and Richter2016; Falkingham et al. Reference Falkingham, Bates, Avanzini, Bennett, Bordy, Breithaupt, Castanera, Citton, Díaz-Martínez, Farlow, Fiorillo, Gatesy, Getty, Hatala, Hornung, Hyatt, Klein, Lallensack, Martin, Marty, Matthews, Meyer, Milàn, Minter, Razzolini, Romilio, Salisbury, Sciscio, Tanaka, Wiseman, Xing and Belvedere2018). Regular digital documentation of sites such as this will enable monitoring of degradation rates and capture of 3D morphology soon after first exposure, maximizing the information recorded. In this case, alignment of the two digital models was difficult because the surfaces had changed so much. If regular 3D mapping of the site is to be carried out in the future, reference positions should be established to facilitate easier, and more accurate, alignment and comparisons of models made at different times.
7. Conclusions
Large impressions in sediments of the Blue Anchor Formation located on the beach near Penarth, south Wales are interpreted as tetrapod tracks. Although it is difficult to identify individual trackways, the high density of impressions suggests that the area was a trample ground that might have been visited by many individuals. Although the number of taxa making these impressions cannot be reliably inferred because of their poor preservation, based on their large size, round shape and digit impressions, we consider it likely that they were made by large sauropodomorph dinosaurs and refer them tentatively to the ichnogenus Eosauropus, although other unidentified taxa might also have been present. This provides an important additional datapoint for documenting Late Triassic terrestrial tetrapod faunas in the UK, where the remains of large-bodied taxa are otherwise rare. Although abiotic processes might have contributed to the formation of other similar features nearby, the track morphology, overprinting, rim displacement and the lack of a residual gypsum infill suggest that these are biogenic structures.
The track-bearing surface extends for an unknown distance beneath the overlying strata and loose pebbles and boulders. However, because it is below the high-tide line, excavations are problematic and would risk destroying the tracks. Until a major endeavour can be undertaken to expose and conserve more of the surface, the tracks are best protected by remaining buried. Regular 3D documentation of the site is the best way to map the surface as it becomes further exposed naturally. Future exposures of this surface will enable additional testing of our hypothesis and, hopefully, will reveal new, better-preserved examples of these features. Photogrammetry represents an excellent tool for archiving and comparing these data and we advocate its habitual use alongside traditional trackway study methods (such as conventional photography, outline tracing, measurements and moulding/casting) in order to maximize data collection potential.
Acknowledgements
SCRM and PMB would like to thank Kerry Rees for her photographs of these structures, which originally brought them to our attention, as well as for her help onsite during our visit. PLF, SCRM and PMB would like to thank Kerry Rees and Samuel Bond for helping clear the site during the 2020 fieldwork. Funding for SCRM and PMB to visit Penarth was provided by the Earth Sciences Departmental Investment Fund (Natural History Museum). JEM and GS warmly thank Laurent Petitpierre for drawing our attention to the structures described in this work, and would also like to thank Matt Williams, Eric Buffetaut and Jean-Michel Mazin for advice and discussions. The authors wish to thank Chris Berry (Cardiff University) for helpful discussions. The authors are grateful to Jesper Milán and two anonymous reviewers for their positive and helpful comments.
Conflicts of interest
None.