Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-13T11:32:08.171Z Has data issue: false hasContentIssue false
  • English
  • Français

Design optimization of an underactuated tendon-driven anthropomorphic hand based on grasp quality measures

Published online by Cambridge University Press:  21 June 2022

Hirakjyoti Basumatary  and
Shyamanta M. Hazarika Open the ORCID record for Shyamanta M. Hazarika [Opens in a new window]
Hirakjyoti Basumatary*
Affiliation:
Indian Institute of Technology, Guwahati, Biomimetic Robotics and Artificial Intelligence Laboratory (BRAIL), Mechanical Engineering Department, Guwahati, India, 781039
Shyamanta M. Hazarika
Affiliation:
Indian Institute of Technology, Guwahati, Biomimetic Robotics and Artificial Intelligence Laboratory (BRAIL), Mechanical Engineering Department, Guwahati, India, 781039
*
*Corresponding author. E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

For an underactuated anthropomorphic hand, apart from replicating the geometry, biomimicry of human counterpart requires design based on functional biomimesis. Optimization based on grasping capabilities to generate a stable grasp for underactuated anthropomorphic hands has been a recent focus. In this article, we optimize the actuation parameters of the underactuated mechanism based on grasp quality measures. Optimization of the hand design parameters like pulley radii, spring stiffnesses, and pre-load angles was undertaken based upon the grasp robustness metric. A quasi-static model based on a soft synergistic compliant grasp of the underactuated hand is formalized. Numerical simulations based on evolutionary strategies are applied to the grasp model to optimize the underactuated parameters. Finally, validation of the results based on the grasp wrench space is presented. The results show that an anthropomorphic hand with an optimized underactuated mechanism performs better grasps.

Keywords

Anthropomorphic underactuated handoptimizationPotential grasp robustnessGrasp quality measureGrasp wrench space
Type
Research Article
Information
Robotica , Volume 40 , Issue 11 , November 2022 , pp. 4056 - 4075
Copyright
© The Author(s), 2022. Published by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Noce, E., Bellingegni, A. D., Ciancio, A. L., Sacchetti, R., Davalli, A., Guglielmelli, E. and Zollo, L., “Emg and eng-envelope pattern recognition for prosthetic hand control,” J. Neurosci. Meth. 311(1), 38–46 (2019).10.1016/j.jneumeth.2018.10.004CrossRefGoogle ScholarPubMed
Votta, A. M., Günay, S. Y., Zylich, B., Skorina, E., Rameshwar, R., Erdogmus, D. and Onal, C. D., Kinematic Optimization of An Underactuated Anthropomorphic Prosthetic Hand (2020) pp. 3397–3403.Google Scholar
Basumatary, H. and Hazarika, S. M., “State of the art in bionic hands,” IEEE Trans. Hum.-Mach. Syst. 50(2), 116–130 (2020).CrossRefGoogle Scholar
Xu, Z., “The Functional Capacity of the Humanlike Robotic Hands,” In: Hand Function (Springer, 2019) pp. 291–312.CrossRefGoogle Scholar
Balasubramanian, R. and Dollar, A. M., “Performance of Serial Underactuated Mechanisms: Number of Degrees of Freedom and Actuators,” In: Redundancy in Robot Manipulators and Multi-Robot Systems (Springer, 2013) pp. 1–13.Google Scholar
Xu, R. and , Ü. Özgüner, “Sliding mode control of a class of underactuated systems,” Automatica 44(1), 233–241 (2008).10.1016/j.automatica.2007.05.014CrossRefGoogle Scholar
Xu, K., Liu, H., Du, Y. and Zhu, X., “Design of an underactuated anthropomorphic hand with mechanically implemented postural synergies,” Adv. Robot. 28(21), 1459–1474 (2014).CrossRefGoogle Scholar
Kakoty, N. M., A Biomimetic Hand with EMG Based Grasp Emulation, PhD Thesis, Computer Sc. & Engg., Tezpur University (2014)Google Scholar
Roa, M. A. and Suárez, R., “Grasp quality measures: review and performance,” Auton. Robot. 38(1), 65–88 (2015).10.1007/s10514-014-9402-3CrossRefGoogle ScholarPubMed
Wen, L., Li, Y., Cong, M., Lang, H. and Du, Y., “Design and Optimization of A Tendon-Driven Robotic Hand,” In: 2017 IEEE International Conference on Industrial Technology (ICIT) (IEEE, 2017) pp. 767–772.CrossRefGoogle Scholar
Datta, R., Pradhan, S. and Bhattacharya, B., “Analysis and design optimization of a robotic gripper using multiobjective genetic algorithm,” IEEE Trans. Syst. Man Cybern. Syst. 46(1), 16–26 (2015).10.1109/TSMC.2015.2437847CrossRefGoogle Scholar
Dong, H., Asadi, E., Qiu, C., Dai, J. and Chen, I.-M., “Geometric design optimization of an under-actuated tendon-driven robotic gripper,” Robot. Comput.-Integr. Manuf. 50, 80–89 (2018).10.1016/j.rcim.2017.09.012CrossRefGoogle Scholar
Salman, H. D., Bakhy, S. H. and Hamzah, M. N., “Design and Optimization of Coupled and Self-Adaptive of an Underactuated Robotic Hand Using Particle Swarm Optimization,” In: IOP Conference Series: Materials Science and Engineering, vol. 928 (IOP Publishing, 2020) p. 022153.10.1088/1757-899X/928/2/022153CrossRefGoogle Scholar
Ko, T., “A tendon-driven robot gripper with passively switchable underactuated surface and its physics simulation based parameter optimization,” IEEE Robot. Automat. Lett. 5(4), 5002–5009 (2020).10.1109/LRA.2020.3005131CrossRefGoogle Scholar
You, W. S., Lee, Y. H., Kang, G., Oh, H. S., Seo, J. K. and Choi, H. R., “Kinematic design optimization for anthropomorphic robot hand based on interactivity of fingers,”Intel. Serv. Robot. 12(2), 197–208 (2019).10.1007/s11370-019-00274-xCrossRefGoogle Scholar
Chen, T., Wang, L., Haas-Heger, M. and Ciocarlie, M., “Underactuation design for tendon-driven hands via optimization of mechanically realizable manifolds in posture and torque spaces,” IEEE Trans. Robot. 36(3), 708–723 (2020).10.1109/TRO.2020.2971428CrossRefGoogle Scholar
Pozzi, M., Malvezzi, M. and Prattichizzo, D., “On grasp quality measures: Grasp robustness and contact force distribution in underactuated and compliant robotic hands,” IEEE Robot. Automat. Lett. 2(1), 329–336 (2016).10.1109/LRA.2016.2612304CrossRefGoogle Scholar
Prattichizzo, D., Salisbury, J. K. and Bicchi, A., “Contact and Grasp Robustness Measures: Analysis and Experiments,” In: Experimental Robotics IV (Springer, 1997) pp. 83–90.10.1007/BFb0035199CrossRefGoogle Scholar
Malvezzi, M. and Prattichizzo, D., “Evaluation of Grasp Stiffness in Underactuated Compliant Hands,” In: 2013 IEEE International Conference on Robotics and Automation(IEEE,2013) pp. 2074–2079.10.1109/ICRA.2013.6630855CrossRefGoogle Scholar
Prattichizzo, D. and Trinkle, J. C., “Grasping,” In: Springer Handbook of Robotics (Springer, 2016) pp. 955–988.10.1007/978-3-319-32552-1_38CrossRefGoogle Scholar
Farnioli, E., Gabiccini, M. and Bicchi, A., “Quasi-Static Analysis of Synergistically Underactuated Robotic Hands in Grasping and Manipulation Tasks,” In: Human and Robot Hands (Springer, 2016) pp. 211–233.10.1007/978-3-319-26706-7_13CrossRefGoogle Scholar
Malvezzi, M., Salvietti, G. and Prattichizzo, D., “Evaluation of Grasp Stiffness in Underactuated Compliant Hands Exploiting Environment Constraints,” In: ROMANSY 22–Robot Design, Dynamics and Control (Springer, 2019) pp. 409–416.10.1007/978-3-319-78963-7_51CrossRefGoogle Scholar
Almeida, L. and Moreno, P., “Potential Grasp Robustness for Underactuated Hands: New Heuristics and Uncertainty Considerations,” In: 2020 IEEE International Conference on Autonomous Robot Systems and Competitions (ICARSC) (IEEE, 2020) pp. 233–238.CrossRefGoogle Scholar
Bicchi, A., “On the closure properties of robotic grasping,” Int. J. Robot. Res. 14(4), 319–334 (1995).CrossRefGoogle Scholar
Malvezzi, M., Gioioso, G., Salvietti, G. and Prattichizzo, D., “Syngrasp: A matlab toolbox for underactuated and compliant hands,” IEEE Robot. Autom. Mag. 22(4), 52–68 (2015).CrossRefGoogle Scholar
Bicchi, A., “Force Distribution in Multiple Whole-Limb Manipulation,” In: [1993] Proceedings IEEE International Conference on Robotics and Automation (IEEE, 1993) pp. 196–201.Google Scholar
Mavrogiannis, C. I., Bechlioulis, C. P., Liarokapis, M. V. and Kyriakopoulos, K. J., “Task-specific Grasp Selection for Underactuated Hands,” In: 2014 IEEE International Conference on Robotics and Automation (ICRA) (IEEE, 2014) pp. 3676–3681.CrossRefGoogle Scholar