Hostname: page-component-78c5997874-mlc7c Total loading time: 0 Render date: 2024-11-13T22:45:58.122Z Has data issue: false hasContentIssue false
  • English
  • Français

Design of gripping devices based on a globoid transmission for a robotic biomaterial aliquoting system

Published online by Cambridge University Press:  10 August 2022

Artem Voloshkin Open the ORCID record for Artem Voloshkin [Opens in a new window] ,
Larisa Rybak Open the ORCID record for Larisa Rybak [Opens in a new window] ,
Vladislav Cherkasov Open the ORCID record for Vladislav Cherkasov [Opens in a new window]  and
Giuseppe Carbone Open the ORCID record for Giuseppe Carbone [Opens in a new window]
Artem Voloshkin
Affiliation:
Russia, Belgorod, Belgorod State Technological University named after V.G. Shukhov
Larisa Rybak*
Affiliation:
Russia, Belgorod, Belgorod State Technological University named after V.G. Shukhov
Vladislav Cherkasov
Affiliation:
Russia, Belgorod, Belgorod State Technological University named after V.G. Shukhov
Giuseppe Carbone
Affiliation:
Russia, Belgorod, Belgorod State Technological University named after V.G. Shukhov Department of Mechanical, Energy and Management Engineering, University of Calabria, Rende, 87036, Italy.
*
*Corresponding author. E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

Every year the shortage of biosamples is increasing, while the requirements for their quality are constantly tightening, which requires the introduction of new technological solutions. To solve these problems, a robotic system for aliquoting biological liquid was developed. The aliquotation process is described. The station includes a serial robot on which a gripper based on a globoid worm is installed. The gripping device is parameterized and takes into account the gripping force for different finger deflections. 3D models were developed using Computer Aided Design (CAD) system tools, after which working layouts were created using 3D printing. The design process and test results are discussed to show the efficiency of the built prototype with lab tests.

Keywords

robot designgraspinggloboid transmissiongripping kinematics3D prototyping
Type
Research Article
Information
Robotica , Volume 40 , Issue 12 , December 2022 , pp. 4570 - 4585
Copyright
© The Author(s), 2022. Published by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Glazunov, V., Lastochkin, A., Shalyukhin, K. and Danilin, P., “To the analysis and classification of relative manipulation devices,” Probl. Mech. Eng. Reliabil. Mach. 4(4), 81–85 (2009).Google Scholar
Krug, R., Stoyanov, T., Tincani, V., Andreasson, H., Mosberger, R., Fantoni, G. and Lilienthal, A. J., “The next step in robot commissioning: Autonomous picking and palletizing,” IEEE Robot. Automat. Lett. 1(1), 546–553 (2016).CrossRefGoogle Scholar
Abdul Rahman, H., Mohamad Husni, N. A., Jalil Zainuddin, M. H. A., Hanafi, D., Ksm Kader Ibrahim, B. S., Saiful Huq, M. and Ahmmad, S. N. Z., “Force control for one degree of freedom haptic device using PID controller,” Int. J. Integr. Eng. 12(4), 66–73 (2020).Google Scholar
Nakamoto, H., Eto, H., Sonoura, T., Tanaka, J. and Ogawa, A., “High-speed and Compact Depalletizing Robot Capable of Handling Packages Stacked Complicatedly,” In: 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (2016) pp. 344–349.Google Scholar
Bilancia, P., Baggetta, M., Berselli, G., Bruzzone, L. and Fanghella, P., “Design of a bio-inspired contact-aided compliant wrist,” Robot Comput.-Integr. Manuf. 67, 1–10 (2020).Google Scholar
Rathmann, S., Raatz, A. and Hesselbach, J., “Active Gripper for Hot Melt Joining of Micro Components,” In: IFIP Advances in Information and Communication Technology (S. Ratchev, ed.) (Springer, Berlin , 2010), pp. 191–198.Google Scholar
Tai, K., El-Sayed, A., Shahriari, M., Biglarbegian, M. and Mahmud, S., “State of the art robotic grippers and applications,” Robotics 5-11(2), 11 (2016).CrossRefGoogle Scholar
Angeles, J. and Park, F., “Performance Evaluation and Design Criteria,” In: Springer Handbook of Robotics (2008) pp. 229–244.CrossRefGoogle Scholar
Noureddine, R., Noureddine, F. and Benamar, A., “Fault tolerant gripper in robotics,” Mecatronics-REM 122-127 (2012).Google Scholar
Ding, D., Liu, Y. and Wang, S., “The synthesis of 3-D form-closure grasps,” Robotica 18(1), 51–58 (2000).CrossRefGoogle Scholar
Morales, A., Prats, M. and Felip, J., “Sensors and methods for the evaluation of grasping,” Grasp. Robot. 10, 103–104 (2013).Google Scholar
Penisi, O., “Industrial grippers: state-of-the-art and main design characteristics,” Grasp. Robot. 10, 107–132 (2013).Google Scholar
Carlos, B. B., Antonio, G. G., Alberto, J. J.ón, Ramiro, C. C. and Martinez, C., “A survey on different control techniques for grasping,” Grasp. Robot. 10, 223–246 (2013).CrossRefGoogle Scholar
Svinin, M., Ueda, K. and Kaneko, M., “On the Liapunov stability of multi-finger grasps,” Robotica 18(1), 59–70 (2000).CrossRefGoogle Scholar
Luo, M., “Orientation for robotic hands,” Grasp. Robot. 10, 159–187 (2013).CrossRefGoogle Scholar
Scott, P., “The ‘Omnigripper’: A form of robot universal gripper,” Robotica 3(3), 153–158 (1985).CrossRefGoogle Scholar
Su, J., Ou, Z. and Qiao, H., “Form-closure caging grasps of polygons with a parallel-jaw gripper,” Robotica 33(6), 1375–1392 (2015).CrossRefGoogle Scholar
Modabberifar, M. and M. Spenko, “Development of a gecko-like robotic gripper using Scott–Russell mechanisms,” Robotica 38(3), 1–9 (2019).Google Scholar
Jeong, D. and K. Lee, “Design and analysis of an origami-based three-finger manipulator,” Robotica 36(2), 1–4 (2017).Google Scholar
Russo, M., “Design and test of a gripper prototype for horticulture products,” Robot Comput. Integr. Manuf. 44(1), 266–275 (2017).CrossRefGoogle Scholar
Belyaev, A., “Gripper device,” Patent Federal Institute of Industrial Property of the Russian Federation, RU118579 (2020).Google Scholar
Tanaka, J., Ogawa, A., Nakamoto, H., Sonoura, T. and Eto, H., “Suction pad unit using a bellows pneumatic actuator as a support mechanism for an end effector of depalletizing robots,” ROBOMECH J. 7(1), 2 (2020).CrossRefGoogle Scholar
Moura, F. and Silva, M., “Application for Automatic Programming of Palletizing Robots,” In: 2018 IEEE International Conference on Autonomous Robot Systems and Competitions (ICARSC) (2018) pp. 48–53.Google Scholar
Magrini, E., Flacco, E. and De Luca, A., “Control of Generalized Contact Motion and Force in Physical Human-Robot Interaction,” In: 2015 IEEE International Conference on Robotics and Automation (ICRA) (2015) pp. 2298–2304.Google Scholar
Fontanelli, G., Ficuciello, F., Villani, L. and Siciliano, B., “Modelling and Identification of the DA Vinci Research Kit Robotic Arms,” In: 2017 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (2017) pp. 1464-1469.Google Scholar
Sato, M. and Yoshikawa, T., “A Grasp Performance Criterion for Robot Hands Considering Multiple Aspects of Tasks and Hand Configurations,” In: Proceedings of the 2011 IEEE International Conference on Robotics and Biomimetics (2011) pp. 1547–1554.Google Scholar