Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Yuwang Liu
Hongguang Wang
Bin Li
and
Weijia Zhou
2008.
An optimal method to determine the parameters of anthropomorphic finger based on four-link mechanism.
p.
842.
Salimi, Shahram
and
Bone, Gary M.
2008.
Kinematic enveloping grasp planning method for robotic dexterous hands and three-dimensional objects.
Robotica,
Vol. 26,
Issue. 3,
p.
331.
Maitland, Murray E.
and
Epstein, Molly B.
2009.
Analysis of Finger Position During Two- and Three-Fingered Grasp: Possible Implications for Terminal Device Design.
JPO Journal of Prosthetics and Orthotics,
Vol. 21,
Issue. 2,
p.
102.
Carbone, Giuseppe
and
González, Antonio
2011.
A numerical simulation of the grasp operation by LARM Hand IV: A three finger robotic hand.
Robotics and Computer-Integrated Manufacturing,
Vol. 27,
Issue. 2,
p.
450.
Birglen, L.
2011.
The kinematic preshaping of triggered self-adaptive linkage-driven robotic fingers.
Mechanical Sciences,
Vol. 2,
Issue. 1,
p.
41.
Nava Rodríguez, Nestor Eduardo
2011.
Advanced Mechanics in Robotic Systems.
p.
91.
Simo-Serra, E.
Perez-Gracia, A.
Moon, H.
and
Robson, N.
2012.
Latest Advances in Robot Kinematics.
p.
173.
Scott, K.
and
Perez-Gracia, A.
2012.
Design of a prosthetic hand with remote actuation.
p.
3056.
Shirafuji, Shouhei
Ikemoto, Shuhei
and
Hosoda, Koh
2012.
Design of An anthropomorphic tendon-driven robotic finger.
p.
372.
Mousavi, Mehdi
Somà, Aurelio
and
Pescarmona, Francesco
2014.
Effects of substituting anthropometric joints with revolute joints in humanoid robots and robotic hands: a case study.
Robotica,
Vol. 32,
Issue. 4,
p.
501.
Shirafuji, Shouhei
Ikemoto, Shuhei
and
Hosoda, Koh
2014.
Development of a tendon-driven robotic finger for an anthropomorphic robotic hand.
The International Journal of Robotics Research,
Vol. 33,
Issue. 5,
p.
677.
Nestor Eduardo Nava Rodriguez
2014.
Weight Reduction: A Typical Issue in the Mechanical Design of Robotic Systems.
International Journal of Robotics and Automation Technology,
Vol. 1,
Issue. 1,
p.
36.
Jitariu, Sebastian
Staretu, Ionel
and
Moldovan, Catalin
2014.
Robotized Montage Unit which Uses an Anthropomorphic Gripper with Five Fingers: CAD Modelling and Simulation.
Applied Mechanics and Materials,
Vol. 656,
Issue. ,
p.
146.
Staretu, Ionel
and
Jitariu, Sebastian
2015.
Reconfigurable Anthropomorphic Gripper with Three Fingers: Synthesis, Analysis, and Simulation.
Applied Mechanics and Materials,
Vol. 762,
Issue. ,
p.
75.
Jitariu, Sebastian
and
Staretu, Ionel
2015.
Gripper with Average Continuous Reconfigurability for Industrial Robots.
Applied Mechanics and Materials,
Vol. 811,
Issue. ,
p.
279.
Ozawa, Ryuta
Mishima, Yuuki
and
Hirano, Yasuyuki
2016.
Design of a Transmission With Gear Trains for Underactuated Mechanisms.
IEEE Transactions on Robotics,
Vol. 32,
Issue. 6,
p.
1399.
Moldovan, Catalin Constantin
and
Staretu, Ionel
2017.
An Anthropomorphic Hand with Five Fingers Controlled by a Motion Leap Device.
Procedia Engineering,
Vol. 181,
Issue. ,
p.
575.
Ceccarelli, M.
and
Zottola, M.
2017.
Design and simulation of an underactuated finger mechanism for LARM Hand.
Robotica,
Vol. 35,
Issue. 3,
p.
483.
Kobayashi, Akinari
Yamaguchi, Kengo
Kinugawa, Jun
Arai, Shogo
Hirata, Yasuhisa
and
Kosuge, Kazuhiro
2017.
Analysis of precision grip force for uGRIPP (underactuated gripper for power and precision grasp).
p.
1937.
Sun, Wei
Kong, Jianyi
Wang, Xingdong
and
Liu, Huaiguang
2018.
Innovative design method of the metamorphic hand.
International Journal of Advanced Robotic Systems,
Vol. 15,
Issue. 1,