Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-27T18:14:09.408Z Has data issue: false hasContentIssue false
  • English
  • Français

Trajectory planning of a 4-RR(SS)2 high-speed parallel robot

Published online by Cambridge University Press:  07 January 2022

Huipu Zhang ,
Manxin Wang Open the ORCID record for Manxin Wang [Opens in a new window] ,
Haibin Lai  and
Junpeng Huang
Huipu Zhang
Affiliation:
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
Manxin Wang*
Affiliation:
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
Haibin Lai
Affiliation:
School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
Junpeng Huang
Affiliation:
Lianyungang Screws Robot Technology Co., Ltd, Lianyungang 222062, China
*
*Corresponding author. E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Abstract

The trajectory-planning method for a novel 4-degree-of-freedom high-speed parallel robot is studied herein. The robot’s motion mechanism adopts RR(SS)2 as branch chains and has a single moving platform structure. Compared with a double moving platform structure, the proposed parallel robot has better acceleration and deceleration performance since the mass of its moving platform is lighter. An inverse kinematics model of the mechanism is established, and the corresponding relationship between the motion parameters of the end-moving platform and the active arm with three end-motion laws is obtained, followed by the optimization of the motion laws by considering the motion laws’ duration and stability. A Lamé curve is used to transition the right-angled part of the traditional gate trajectory, and the parameters of the Lamé curve are optimized to achieve the shortest movement time and minimum acceleration peak. A method for solving Lamé curve trajectory interpolation points based on deduplication optimization is proposed, and a grasping frequency experiment is conducted on a robot prototype. Results show that the grasping frequency of the optimized Lamé curve prototype can be increased to 147 times/min, and its work efficiency is 54.7% higher than that obtained using the traditional Adept gate-shaped trajectory.

Keywords

high-speed parallel robottrajectory planningLamé curve
Type
Research Article
Information
Robotica , Volume 40 , Issue 8 , August 2022 , pp. 2666 - 2682
Copyright
© The Author(s), 2022. Published by Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Pierrot, F. and Company, O., “H4: A New Family of 4-DOF Parallel Robots,” Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics (1999) pp. 508–513.Google Scholar
Krut, S., Company, O., Benoit, M., et al., “I4: A New Parallel Mechanism for SCARA Motions,” Proceedings of the IEEE International Conference on Robotics and Automation (2003) pp. 1875–1880.Google Scholar
Krut, S., Company, O., Nabat, V., et al., “Heli4: A Parallel Robot for SCARA Motions with a Very Compact Traveling Plate and a Symmetrical Design,” Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems (2006) pp. 1656–1661.Google Scholar
Nabat, V., Company, O., Krut, S., et al., “Par4: Very High Speed Parallel Robot for Pick-and-Place,” Proceedings of the IEEE/RSJ International Conference on Intelligent Robots and Systems (2005) pp. 1202–1207.Google Scholar
Liu, X. J., Wang, J. S., et al., “Discussion on new configuration design of parallel robot mechanism,” China Mech. Eng. 12(12), 1339–1342 (2001).Google Scholar
Zhu, Y. H., Zhao, J. and Cai, H. G., “Research on the closed-loop self-calibration of delta mechanism,” J. Xi’an Jiaotong Univ. 8(2), 134–137 (2005).Google Scholar
Nan, W., Tang, X. and Song, B., “A New Automatic Motion Planning Algorithm for a 4-Degree-of-Freedom Parallel Kinematic Manipulator Based on the Centre Sphere Method,” Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture. 299(1), 64–77 (2015).CrossRefGoogle Scholar
Xie, Z. X., Shang, D. W. and Ren, R., “Optimization and experimental verification of pick-and-place trajectory for a Delta parallel robot based on lamé curves,” J. Mech. Eng. 51(1), 52–59 (2015).CrossRefGoogle Scholar
Zhang, Z. Y., “The research on high-speed motion control for Delta parallel robot,” Beijing Jiaotong University (2018).Google Scholar
Chen, W., Tang, Y. and Zhao, Q., “A Novel Trajectory Planning Scheme for Spray Painting Robot with Bézier Curves,” 2016 Chinese Control and Decision Conference (CCDC) (2016) pp. 6746–6750.Google Scholar
Han, Y. D., “Path planning and control of Delta robot for high-speed handling,” Harbin Institute of Technology (2017).Google Scholar
Su, T. T. and Zhang, H. J. et al., “Trajectory planning for a Delta robot based on PH curve,” Robotics 40(1), 46–55 (2018).Google Scholar
Wu, J. W., “Research and design of three-degree-of-freedom Delta robot control system,” Qingdao University (2018).Google Scholar
Su, T., Cheng, L., Wang, Y., Liang, X. and Zhang, H., “Time-optimal trajectory planning for delta robot based on quintic pythagorean-hodograph curves,” IEEE Access. 6, 28530–28539 (2018).CrossRefGoogle Scholar
Luo, X., Li, S., Liu, S. and Liu, G., “An optimal trajectory planning method for path tracking of industrial robots,” Robotica. 37(3), 502–520 (2019).CrossRefGoogle Scholar
Zhang, X. and Shi, G., “Multi-objective optimal trajectory planning for manipulators in the presence of obstacles,” Robotica, 1–19 (2021).CrossRefGoogle Scholar
Chen, W., Fang, H., Wensong, H. E., et al., “Optimal trajectory planning with three-parameter Lamé curve for delta robot,” Mach. Des. Res. 34(1), 8–12 (2018).Google Scholar
Pan, C., “Research on trajectory planning and sorting strategy of DELTA parallel robot,” Qufu Normal University (2018).Google Scholar
He, F., “Research on trajectory planning and motion control realization of DELTA parallel robot,” Changsha University of Science and Technology (2017).Google Scholar
Cong, M., Xiong, Y. K., Liu, D. and Yang, X. L., “A method of time-optimal trajectories planning for parallel robot operation space,” Mach. Des. 33(2), 7–13 (2016).Google Scholar
Mei, J. P., Sun, Y. D., He, Y., et al. “Trajectory optimization of the 4-DOF parallel manipulator based on the energy-consumption optimization,” Mach. Des. 345(7), 17–25 (2018).Google Scholar
Li, Y. H., “Optimization of delta parallel robot grab and place trajectory,” Electr. Autom. 38(3), 20–22 (2016).Google Scholar
Wang, M. X., Huang, T., Feng, H. T., et al., “A three level one rotation four degree of freedom parallel mechanism,” China Patent(2015-11-16), ZL201510786414.6.Google Scholar
Xie, F. G. and Liu, X. J., “Design and development of a high-speed and high-rotation robot with four identical arms and a single platform,” ASME J. Mech. Rob. 7(4), 041015 (2015).CrossRefGoogle Scholar
Zhang, X., “Research on the Control Method of High Speed Light Parallel Manipulator,” Tianjin University (2005).Google Scholar
Liu, S. T., “Optimal Design of 2-,;3-,4-DOF High-speed Parallel Manipulators: Theory and Application,” Tianjin University (2012).Google Scholar
Song, Y. P., “Research on dynamic analysis and motion control of four-degree-of-freedom high-speed parallel robot mechanism,” Nanjing University of Science and Technology (2018).Google Scholar