Article contents
Improved Precision of Radiocarbon Measurements for CH4 and CO2 Using GC and Continuous-Flow AMS Achieved by Summation of Repeated Injections
Published online by Cambridge University Press: 09 February 2016
Abstract
Compound specific radiocarbon measurements can be made instantaneously using a gas chromatograph (GC) combustion system coupled to a 14C AMS system fitted with a gas ion source. Samples below 10 μg C can be analyzed but the precision is reduced to 5–10% because of lower source efficiency. We modified our GC for CH4 and CO2 analysis and injected samples multiple times to sum data and increase precision. We attained a maximum precision of 0.6% for modern CO2 from 25 injections of 27 μg C and a background of ≃0.5% (40 kyr) for ancient methane. The 14C content of dissolved CO2 and CH4 in water samples collected at a deep-sea hydrothermal vent and a serpentine mud volcano was measured and the results for the vent sample are consistent with previously published data. Further experiments are required to determine a calibration and correction procedure to maximize accuracy.
- Type
- Articles
- Information
- Radiocarbon , Volume 55 , Issue 2: Proceedings of the 21st International Radiocarbon Conference (Part 1 of 2) , 2013 , pp. 677 - 685
- Copyright
- Copyright © 2013 by the Arizona Board of Regents on behalf of the University of Arizona
References
- 4
- Cited by