Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-22T20:43:48.822Z Has data issue: false hasContentIssue false
  • English
  • Français

Conception of Design Principles for Additive Manufacturing

Part of: Design for Additive Manufacturing

Published online by Cambridge University Press:  26 July 2019

Filip Valjak  and
Nenad Bojčetić

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

Additive Manufacturing (AM) brought new design freedom and possibilities that enable design and manufacturing of products with new forms and functionalities. To utilise these possibilities a new design approach emerged, Design for Additive Manufacturing (DfAM), that contains methods and tools for supporting AM oriented design process. Designers working with AM are aware of the need to apply DfAM and AM possibilities in conceptual design phase where they have the most significant influence on product architecture and form but are facing a lack of suitable DfAM approaches for early design phases. Therefore, the presented research is investigating possibilities of storing and representing AM knowledge in the form of design principles to be used in the conceptual design phase. The paper proposes conceiving of Design Principles for Additive Manufacturing repository where formalised AM knowledge is stored in the form of design principles and structured based on function criteria. In the paper, various elements of design principle representation are discussed, as well as their role in the conceptual design process.

Keywords

Design for Additive Manufacturing (DfAM)Design principlesFunctional modellingAdditive Manufacturing
Type
Article
Information
Proceedings of the Design Society: International Conference on Engineering Design , Volume 1 , Issue 1 , July 2019 , pp. 689 - 698
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
© The Author(s) 2019

References

Maidin Bin, S. Campbell, I. and Pei, E. (2012), “Development of a design feature database to support design for additive manufacturing”, Assembly Automation, Vol. 32 No. 3, pp. 235–244. http://doi.org/10.1108/01445151211244375Google Scholar
Blösch-Paidosh, A. and Shea, K. (2017), “Design Heuristics for Additive Manufacturing”, Proceedings of the 21st International Conference on Engineering Design (ICED 17) Vol 5: Design for X, Design to X, Vancouver, Canada, August 21–25, 2017, The Design Society, Vancouver, Canada, pp. 91–100.Google Scholar
Blösch-Paidosh, A. and Shea, K. (2018), “Design Heuristics for Additive Manufacturing Validated Through a User Study”, Journal of Mechanical Design, Vol. 14 No. 4, p. MD-17-1838. http://doi.org/10.1115/1.4041051Google Scholar
Borgue, O., Müller, J.R., Panarotto, M. and Isaksson, O. (2018), “Function modelling and constraints replacement for additive manufacturing in satellite components”, Proceedings of NordDesign 2018, Linköping, Sweden, August 14–17, 2018, The Design Society, Linköping, Sweden, pp. 1–12.Google Scholar
Eckert, C., Stacey, M. and Earl, C. (2005), “References to past designs”, In: Gero, J.S. and Bonnardel, N. (Eds.), Studying Designers ‘05, Key Centre of Design Computing and Cognition, Sydney, Australia, pp. 3–21.Google Scholar
Fu, K.K., Yang, M.C. and Wood, K.L. (2015), “Design Principles: The Foundation of Design”, Volume 7: 27th International Conference on Design Theory and Methodology, Boston, USA August 2–5, 2015, ASME, Boston, Massachusetts, USA, p. V007T06A034. http://doi.org/10.1115/DETC2015-46157Google Scholar
Fu, K.K., Yang, M.C. and Wood, K.L. (2016), “Design Principles: Literature Review, Analysis, and Future Directions”, Journal of Mechanical Design, Vol. 138 No. 10, p. 101103. http://doi.org/10.1115/1.4034105Google Scholar
Georgiev, G. V. and Taura, T. (2015), “Using Idea Materialization To Enhance Design Creativity”, 20th International Conference on Engineering Design (ICED 15), Milan, Italy, July 27-30, 2015, The Design Society, Milan, Italy, pp. 1–10.Google Scholar
Gibson, I., Rosen, D. and Stucker, B. (2015), Additive Manufacturing Technologies, Rapid Manufacturing Association , Second Edi., Springer New York, New York. http://doi.org/10.1007/978-1-4939-2113-3Google Scholar
Goldschmidt, G. and Sever, A.L. (2011), “Inspiring design ideas with texts”, Design Studies, Vol. 32 No. 2, pp. 139–155. http://doi.org/10.1016/j.destud.2010.09.006Google Scholar
Gonçalves, M., Cardoso, C. and Badke-Schaub, P. (2014), “What inspires designers? Preferences on inspirational approaches during idea generation”, Design Studies, Vol. 35 No. 1, pp. 29–53. http://doi.org/10.1016/j.destud.2013.09.001Google Scholar
Herring, S.R., Chang, C.-C., Krantzler, J. and Bailey, B.P. (2009), “Getting inspired! Understanding How and Why Examples are Used in Creative Design Practice”, Proceedings of the 27th International Conference on Human Factors in Computing Systems - CHI 09, New York, April 4–9, 2009, ACM Press, New York, New York, USA, p. 87. http://doi.org/10.1145/1518701.1518717Google Scholar
Hirtz, J., Stone, R.B., McAdams, D.A., Szykman, S. and Wood, K.L. (2002), “A functional basis for engineering design: Reconciling and evolving previous efforts”, Research in Engineering Design, Vol. 13 No. 2, pp. 65–82. http://doi.org/10.1007/s00163-001-0008-3Google Scholar
Ko, H. and Moon, S.K. (2017), “Contrasting Function With Affordance in Design for Additive Manufacturing”, ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference Volume 1: 37th Computers and Information in Engineering Conference, Cleveland, Ohio, USA, August 6–9, 2017, ASME, Ohio, USA, p. V001T02A031. http://doi.org/10.1115/DETC2017-68157Google Scholar
Kumke, M., Watschke, H. and Vietor, T. (2016), “A new methodological framework for design for additive manufacturing”, Virtual and Physical Prototyping, Vol. 11 No. 1, pp. 3–19. http://doi.org/10.1080/17452759.2016.1139377Google Scholar
Laverne, F., Segonds, F., Anwer, N. and Le Coq, M. (2015), “Assembly Based Methods to Support Product Innovation in Design for Additive Manufacturing: An Exploratory Case Study”, Journal of Mechanical Design, Vol. 137 No. 12, p. 121701. http://doi.org/10.1115/1.4031589Google Scholar
Lindwall, A. and Törlind, P. (2018), “Evaluating Design Heuristics for Additive Manufacturing as an Explorative Workshop Method”, Proceedings of the DESIGN 2018 15th International Design Conference, Dubrovnik, Croatia, May 21–24, 2018, The Design Society, Dubrovnik, Croatia, pp. 1221–1232. http://doi.org/10.21278/idc.2018.0310Google Scholar
Neeley, W.L., Lim, K., Zhu, A. and Yang, M.C. (2013), “Building Fast to Think Faster: Exploiting Rapid Prototyping to Accelerate Ideation During Early Stage Design”, Volume 5: 25th International Conference on Design Theory and Methodology; ASME 2013 Power Transmission and Gearing Conference, Portland, Oregon, USA, August 4–7, 2013, ASME, Portland, USA, p. V005T06A022. http://doi.org/10.1115/DETC2013-12635Google Scholar
Pahl, G., Beitz, W., Feldhusen, J. and Grote, K.-H. (2007), Engineering Design, Eds: Wallace, K. and Blessing, L., Third Edit., Springer, London, London. http://doi.org/10.1007/978-1-84628-319-2.Google Scholar
Perez, K.B., Anderson, D.S. and Wood, K.L. (2015), “Crowdsourced Design Principles for Leveraging the Capabilities of Additive Manufacturing”, 20th International Conference on Engineering Design (ICED 15), Milan, Italy, July 27–30, 2015, The Design Society, Milan, Italy, pp. 1–10.Google Scholar
Pradel, P., Zhu, Z., Bibb, R. and Moultrie, J. (2018a), “Investigation of design for additive manufacturing in professional design practice”, Journal of Engineering Design, Vol. 29 No. 4-5, pp. 165–200. http://doi.org/10.1080/09544828.2018.1454589Google Scholar
Pradel, P., Zhu, Z., Bibb, R. and Moultrie, J. (2018b), “A framework for mapping design for additive manufacturing knowledge for industrial and product design”, Journal of Engineering Design, Vol. 29 No. 6, pp. 291–326. http://doi.org/10.1080/09544828.2018.1483011Google Scholar
Purcell, A.T. and Gero, J.S. (1996), “Design and other types of fixation”, Design Studies, Vol. 17 No. 4 SPEC. ISS., pp. 363–383. http://doi.org/10.1016/S0142-694X(96)00023-3Google Scholar
Rias, A.L., Segonds, F., Bouchard, C. and Abed, S. (2017), “Towards additive manufacturing of intermediate objects (AMIO) for concepts generation”, International Journal on Interactive Design and Manufacturing, Vol. 11 No. 2, pp. 301–315. http://doi.org/10.5772/50570Google Scholar
Sass, L. and Oxman, R. (2006), “Materializing design: The implications of rapid prototyping in digital design”, Design Studies, Vol. 27 No. 3, pp. 325–355. http://doi.org/10.1016/j.destud.2005.11.009Google Scholar
Seepersad, C.C. (2014), “Challenges and Opportunities in Design for Additive Manufacturing”, 3D Printing and Additive Manufacturing, Vol. 1 No. 1, pp. 10–13. http://doi.org/10.1089/3dp.2013.0006Google Scholar
Thompson, M.K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R.I., Gibson, I., Bernard, A. et al. (2016), “Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints”, CIRP Annals-Manufacturing Technology, Vol. 65 No. 2, pp. 737–760. http://doi.org/10.1016/j.cirp.2016.05.004Google Scholar
Ullman, D.G. (2010), The Mechanical Design Process, McGraw-Hill Education, Boston. http://doi.org/10.1017/CBO9781107415324.004.Google Scholar
Valjak, F., Bojčetić, N. and Lukić, M. (2018), “Design for Additive Manufacturing: Mapping of Product Functions”, Proceedings of the DESIGN 2018 15th International Design Conference, Dubrovnik, Croatia, May 21-24, 2018, The Design Society, Dubrovnik, Croatia, pp. 1369–1380. http://doi.org/10.21278/idc.2018.0364Google Scholar
Weiss, F., Binz, H. and Roth, D. (2016), “Conception of a design catalogue for the development of functionalities with additive manufacturing”, Proceedings of NordDesign 2016, Volume 2, Trondheim, Norway, August 10–12, 2016, The Design Society, Trondheim, Norway, pp. 1–10.Google Scholar
Yang, S., Tang, Y. and Zhao, Y.F. (2016), “Assembly-Level Design for Additive Manufacturing: Issues and Benchmark”, Volume 2A: 42nd Design Automation Conference, Charlotte, North Carolina, USA, August 21–24, 2016, ASME, p. V02AT03A028. http://doi.org/10.1115/DETC2016-59565Google Scholar
Yilmaz, S. and Seifert, C. (2010), “Cognitive Heuristics Use in Engineering Design Ideation”, Proceedings of DESIGN 2010, the 11th International Design Conference, Dubrovnik, Croatia, May 17–20, 2010, The Design Society, pp. 625–627.Google Scholar