Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-26T20:33:31.490Z Has data issue: false hasContentIssue false
  • English
  • Français

Supporting the Transition Towards Electromobility in the Construction and Mining Sector: Optimization Framework and Demonstration on an Electrical Hauler

Published online by Cambridge University Press:  26 May 2022

R. J. Machchhar  and
A. Bertoni
R. J. Machchhar*
Affiliation:
Blekinge Institute of Technology, Sweden
A. Bertoni
Affiliation:
Blekinge Institute of Technology, Sweden
*
[email protected]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

The paper presents a framework for the integration of the system's design variables, state variables, control strategies, and contextual variables into a design optimization problem to assist early-stage design decisions. The framework is based on a global optimizer incorporating Dynamic Programming, and its applicability is demonstrated by the conceptual design of an electrical hauler. Pareto front of optimal design solutions, in terms of time and cost, together with optimal velocity profiles and battery state-of-charge is visualized for the given mining scenario.

Keywords

systems engineering (SE)decision makingdesign optimisationdynamic programmingearly design phase
Type
Article
Information
Proceedings of the Design Society , Volume 2: DESIGN2022 , May 2022 , pp. 1649 - 1658
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2022.

References

Baum, F., MacDougall, C. and Smith, D. (2006), “Participatory action research”, Journal of Epidemiology and Community Health, Vol. 60 No. 10, pp. 854–857. 10.1136/jech.2004.028662CrossRefGoogle ScholarPubMed
Bellman, R. (1966), “Dynamic Programming”, Science, American Association for the Advancement of Science, Vol. 153 No. 3731, pp. 34–37. 10.1126/science.153.3731.34Google Scholar
Bertoni, A., Larsson, T., Larsson, J. and Elfsberg, J. (2017), “Mining data to design value: A demonstrator in early design”, DS 87-7 Proceedings of the 21st International Conference on Engineering Design (ICED 17) Vol 7: Design Theory and Research Methodology, Vancouver, Canada, 21-25.08. 2017, pp. 021–029.Google Scholar
Choi, E. and Chang, S. (2020), “A Temperature-Dependent State of Charge Estimation Method Including Hysteresis for Lithium-Ion Batteries in Hybrid Electric Vehicles”, IEEE Access, presented at the IEEE Access, Vol. 8, pp. 129857–129868. 10.1109/ACCESS.2020.3009281Google Scholar
Fiori, C., Ahn, K. and Rakha, H.A. (2016), “Power-based electric vehicle energy consumption model: Model development and validation”, Applied Energy, Vol. 168, pp. 257–268. 10.1016/j.apenergy.2016.01.097CrossRefGoogle Scholar
Frank, M. (2019), A Step Towards the Design of Collaborative Autonomous Machines: A Study on Construction and Mining Equipment, Licentiate thesis, comprehensive summary, Blekinge Institute of Technology Licentiate Dissertation Series, Blekinge Tekniska Högskola, Karlskrona.Google Scholar
Fries, M., Lehmeyer, M. and Lienkamp, M. (2017), “Multi-criterion optimization of heavy-duty powertrain design for the evaluation of transport efficiency and costs”, 2017 IEEE 20th International Conference on Intelligent Transportation Systems (ITSC), presented at the 2017 IEEE 20th International Conference on Intelligent Transportation Systems (ITSC), pp. 1–8. 10.1109/ITSC.2017.8317753Google Scholar
Ghandriz, T., Jacobson, B., Murgovski, N., Nilsson, P. and Laine, L. (2021), “Real-Time Predictive Energy Management of Hybrid Electric Heavy Vehicles by Sequential Programming”, IEEE Transactions on Vehicular Technology, presented at the IEEE Transactions on Vehicular Technology, Vol. 70 No. 5, pp. 4113–4128. 10.1109/TVT.2021.3069414Google Scholar
Grunditz, E. (2016), Design and Assessment of Battery Electric Vehicle Powertrain, with Respect to Performance, Energy Consumption and Electric Motor Thermal Capability, Chalmers University of Technology.Google Scholar
Gundabattini, E., Mystkowski, A., Idzkowski, A., R., R.S. and Solomon, D.G. (2021), “Thermal Mapping of a High-Speed Electric Motor Used for Traction Applications and Analysis of Various Cooling Methods—A Review”, Energies, Multidisciplinary Digital Publishing Institute, Vol. 14 No. 5, p. 1472. 10.3390/en14051472Google Scholar
Guzzella, L. and Sciarretta, A. (2007), Vehicle Propulsion Systems: Introduction to Modeling and Optimization, Springer Science & Business Media.Google Scholar
He, H., Tang, H. and Wang, X. (2013), “Global Optimal Energy Management Strategy Research for a Plug-In Series-Parallel Hybrid Electric Bus by Using Dynamic Programming”, Mathematical Problems in Engineering, Vol. 2013, pp. 1–11. 10.1155/2013/708261Google Scholar
Huria, T., Ceraolo, M., Gazzarri, J. and Jackey, R. (2012), “High fidelity electrical model with thermal dependence for characterization and simulation of high power lithium battery cells”, 2012 IEEE International Electric Vehicle Conference, presented at the 2012 IEEE International Electric Vehicle Conference, pp. 1–8. 10.1109/IEVC.2012.6183271Google Scholar
“HVH Series Electric Motor - BorgWarner”. (n.d.)., available at: https://www.borgwarner.com/technologies/electric-drive-motors/hvh-series-electric-motor (accessed 3 October 2021)Google Scholar
Ke, C. and Song, X. (2018), “Control of Down-Hole Drilling Process Using a Computationally Efficient Dynamic Programming Method”, Journal of Dynamic Systems, Measurement, and Control, Vol. 140 No. 10. 10.1115/1.4039787Google Scholar
Kokkolaras, M. (2019), “When, Why, and How Can Derivative-Free Optimization Be Useful to Computational Engineering Design?”, Journal of Mechanical Design, Vol. 142 No. 1. 10.1115/1.4045043Google Scholar
Kossiakoff, A. and Sweet, W.N. (2003), Systems Engineering: Principles and Practices, Wiley Online Library.Google Scholar
“Lithium Ion Batteries (Li-Ion) - Panasonic”. (n.d.)., available at: https://d8-na.industrial.panasonic.com/node/41 (accessed 13 August 2021)Google Scholar
Liu, K., Wang, J., Yamamoto, T. and Morikawa, T. (2016), “Modelling the multilevel structure and mixed effects of the factors influencing the energy consumption of electric vehicles”, Applied Energy, Vol. 183, pp. 1351–1360. 10.1016/j.apenergy.2016.09.082Google Scholar
Luin, B., Petelin, S. and Al-Mansour, F. (2019), “Microsimulation of electric vehicle energy consumption”, Energy, Vol. 174, pp. 24–32. 10.1016/j.energy.2019.02.034Google Scholar
Machchhar, R.J. and Bertoni, A. (2021), “Data-Driven Design Automation for Product-Service Systems Design: Framework and Lessons Learned from Empirical Studies”, Proceedings of the Design Society, Vol. 1, presented at the 23rd International Conference on Engineering Design (ICED), Cambridge University Press, pp. 841–850. 10.1017/pds.2021.84Google Scholar
Martins, J.R.R.A. and Lambe, A.B. (2013), “Multidisciplinary Design Optimization: A Survey of Architectures”, AIAA Journal, Vol. 51 No. 9, pp. 2049–2075. 10.2514/1.J051895Google Scholar
Ostadi, A. and Kazerani, M. (2014), “Optimal Sizing of the Battery Unit in a Plug-in Electric Vehicle”, IEEE Transactions on Vehicular Technology, presented at the IEEE Transactions on Vehicular Technology, Vol. 63 No. 7, pp. 3077–3084. 10.1109/TVT.2014.2302676CrossRefGoogle Scholar
Pettersson, P., Jacobson, B., Bruzelius, F., Johannesson, P. and Fast, L. (2020), “Intrinsic differences between backward and forward vehicle simulation models”, IFAC-PapersOnLine, Vol. 53 No. 2, pp. 14292–14299. 10.1016/j.ifacol.2020.12.1368CrossRefGoogle Scholar
Powell, W.B. (2007), Approximate Dynamic Programming: Solving the Curses of Dimensionality, John Wiley & Sons.Google Scholar
Rios, L.M. and Sahinidis, N.V. (2013), “Derivative-free optimization: a review of algorithms and comparison of software implementations”, Journal of Global Optimization, Vol. 56 No. 3, pp. 1247–1293. 10.1007/s10898-012-9951-yGoogle Scholar
Sorniotti, A., Subramanyan, S., Turner, A., Cavallino, C., Viotto, F. and Bertolotto, S. (2011), “Selection of the Optimal Gearbox Layout for an Electric Vehicle”, SAE International Journal of Engines, SAE International, Vol. 4 No. 1, pp. 1267–1280.Google Scholar
Wang, J., Besselink, I. and Nijmeijer, H. (2018), “Battery electric vehicle energy consumption prediction for a trip based on route information”, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, IMECHE, Vol. 232 No. 11, pp. 1528–1542. 10.1177/0954407017729938Google Scholar
Yannou, B., Yvars, P.-A., Hoyle, C. and Chen, W. (2013), “Set-based design by simulation of usage scenario coverage”, Journal of Engineering Design, Taylor & Francis, Vol. 24 No. 8, pp. 575–603. 10.1080/09544828.2013.780201Google Scholar
Ye, Z., Li, K., Stapelbroek, M., Savelsberg, R., Günther, M. and Pischinger, S. (2019), “Variable Step-Size Discrete Dynamic Programming for Vehicle Speed Trajectory Optimization”, IEEE Transactions on Intelligent Transportation Systems, presented at the IEEE Transactions on Intelligent Transportation Systems, Vol. 20 No. 2, pp. 476–484. 10.1109/TITS.2018.2812921CrossRefGoogle Scholar