Hostname: page-component-cd9895bd7-jkksz Total loading time: 0 Render date: 2024-12-26T08:28:14.692Z Has data issue: false hasContentIssue false
  • English
  • Français

A SPECULATION ON THE POTENTIAL SUPPORT OF BIO-INSPIRED DESIGN TO BIOLOGICALISATION IN MANUFACTURING

Published online by Cambridge University Press:  27 July 2021

Helena Hashemi Farzaneh ,
Yuri Borgianni ,
David Forti  and
Erwin Rauch
Helena Hashemi Farzaneh
Affiliation:
GE Additive, Munich, Germany
Yuri Borgianni*
Affiliation:
Free University of Bolzano-Bozen, Bolzano, Italy
David Forti
Affiliation:
Free University of Bolzano-Bozen, Bolzano, Italy
Erwin Rauch
Affiliation:
Free University of Bolzano-Bozen, Bolzano, Italy
*
Borgianni, Yuri, Free University of Bolzano-Bozen, Faculty of Science and Technology, Italy, [email protected]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

The paper investigates to what extent the knowledge accumulated in the field of Bio-Inspired Design might benefit the process of biologicalisation in manufacturing. According to visions making inroads in the manufacturing field, the latter will not be limited to the consideration and the analysis of biological principles as a source of inspiration for solving technical and organizational problems. In fact, the process of biologicalisation in manufacturing foresees the development of bio-integrated and bio-intelligent systems. In light of these expected developments, Bio-Inspired Design’s might fail to support the whole transition to take place in the manufacturing field. Methodological limitations still to overcome represent an important barrier in this perspective too. While a transfer of knowledge from the design to the manufacturing domain seems unlikely, the authors individuate aspects that encourage cross-fertilization between Bio-Inspired Design and biologicalisation in manufacturing. These include the need to include biologists in engineering teams, the objective of sustainable development, and a shared attention to the evolution of (Design for) Additive Manufacturing.

Keywords

Bio-inspired design / biomimeticsIndustry 4.0Additive ManufacturingbiologicalisationMulti- / Cross- / Trans-disciplinary processes
Type
Article
Information
Proceedings of the Design Society , Volume 1: ICED21 , August 2021 , pp. 221 - 230
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2021. Published by Cambridge University Press

References

Bai, C., Dallasega, P., Orzes, G., and Sarkis, J. (2020), “Industry 4.0 technologies assessment: A sustainability perspective”, International Journal of Production Economics, pp. 107776. https://doi.org/10.1016/j.ijpe.2020.107776CrossRefGoogle Scholar
Baldussu, A., and Cascini, G. (2015), “About integration opportunities between TRIZ and biomimetics for inventive design”, Procedia Engineering, Vol. 131, pp. 3–13. https://doi.org/10.1016/j.proeng.2015.12.342CrossRefGoogle Scholar
Byrne, G., Dimitrov, D., Monostori, L., Teti, R., van Houten, F. and Wertheim, R. (2018), “Biologicalisation: Biological transformation in manufacturing,” CIRP Journal of Manufacturing Science and Technology, Vol. 21, pp. 1–32. https://doi.org/10.1016/j.cirpj.2018.03.003CrossRefGoogle Scholar
Ceschin, F., and Gaziulusoy, I. (2016), “Evolution of design for sustainability: From product design to design for system innovations and transitions”, Design studies, Vol. 47, pp. 118–163. https://doi.org/10.1016/j.destud.2016.09.002CrossRefGoogle Scholar
Cohen, Y. H. and Reich, Y. (2016), Biomimetic Design Method for Innovation and Sustainability, Springer, Cham.10.1007/978-3-319-33997-9CrossRefGoogle Scholar
Dias-Ferreira, J., Ribeiro, L., Akillioglu, H., Neves, P., and Onori, M. (2018), “BIOSOARM: a bio-inspired self-organising architecture for manufacturing cyber-physical shopfloors”, Journal of Intelligent Manufacturing, Vol. 29 No. 7, pp. 1659–1682. https://doi.org/10.1007/s10845-016-1258-2CrossRefGoogle Scholar
Dias-Ferreira, J., Ribeiro, L., Akillioglu, H., Neves, P., and Onori, M. (2018), “BIOSOARM: a bio-inspired self-organising architecture for manufacturing cyber-physical shopfloors”, Journal of Intelligent Manufacturing, Vol. 29 No. 7, pp. 1659–1682.10.1007/s10845-016-1258-2CrossRefGoogle Scholar
Domke, M. L., and Hashemi Farzaneh, H. (2018), “Research in bio-inspired design-what is its current focus?”, In DS 89: Proceedings of The Fifth International Conference on Design Creativity (ICDC 2018), University of Bath, Bath, UK, January 31st – February 2nd 2018, pp. 314–321.Google Scholar
Drossel, W., Dani, I., and Wertheim, R. (2019), “Biological transformation and technologies used for manufacturing of multifunctional metal-based parts”, Procedia Manufacturing, Vol. 33, pp. 115–122. https://doi.org/10.1016/j.promfg.2019.04.016CrossRefGoogle Scholar
du Plessis, A., Broeckhoven, C., Yadroitsava, I., Yadroitsev, I., Hands, C. H., Kunju, R., and Bhate, D. (2019), “Beautiful and functional: a review of biomimetic design in additive manufacturing”, Additive Manufacturing, Vol. 27, pp. 408–427. https://doi.org/10.1016/j.addma.2019.03.033CrossRefGoogle Scholar
Esat, R., and Ahmed-Kristensen, S. (2018), “Classification of bio-design applications: towards a design methodology”, In DS 92: Proceedings of the DESIGN 2018 15th International Design Conference, pp. 1031–1042. https://doi.org/10.21278/idc.2018.0531CrossRefGoogle Scholar
Faludi, J., Ali, O., Srour, O., Mecanna, S., Kamareddine, R., and Chatty, T. (2019), “Preliminary Results Testing What Different Design Solutions Arise from Different Sustainable Design Methods”, In Proceedings of the Design Society: International Conference on Engineering Design, July 2019, Cambridge University Press, Vol. 1, No. 1, pp. 3351–3360. https://doi.org/10.1017/dsi.2019.342CrossRefGoogle Scholar
Fayemi, P. E., Wanieck, K., Zollfrank, C., Maranzana, N., and Aoussat, A. (2017), “Biomimetics: process, tools and practice”, Bioinspiration & biomimetics, Vol. 12 No. 1, pp. 011002.10.1088/1748-3190/12/1/011002CrossRefGoogle ScholarPubMed
Fu, K., Moreno, D., Yang, M., and Wood, K. L. (2014), “Bio-inspired design: an overview investigating open questions from the broader field of design-by-analogy”, Journal of Mechanical Design, Vol. 136 No. 11. https://doi.org/10.1115/1.4028289CrossRefGoogle Scholar
Goel, A., Rugaber, S., and Vattam, S. (2009), “Structure, behavior & function of complex systems: The SBF modeling language”, International Journal of AI in Engineering Design, Analysis and Manufacturing, Vol. 23 No. 1, pp. 23–35. https://doi.org/10.1017/S0890060409000080Google Scholar
Graeff, E., Maranzana, N., and Aoussat, A. (2019), “Biomimetics, where are the biologists?”, Journal of Engineering Design, Vol. 30 No. 8-9, pp. 289–310. https://doi.org/10.1080/09544828.2019.1642462CrossRefGoogle Scholar
Hashemi Farzaneh, H. (2020), “Bio-inspired design: the impact of collaboration between engineers and biologists on analogical transfer and ideation”, Research in Engineering Design, Vol. 31 No. 3, pp. 299–322. https://doi.org/10.1007/s00163-020-00333-wCrossRefGoogle Scholar
Hashemi Farzaneh, H., Angele, F., and Zimmermann, M. (2019), “Bio-Inspired Design for Additive Manufacturing-Case Study: Microtiter Plate”, In Proceedings of the Design Society: International Conference on Engineering Design, July 2019, Cambridge University Press, Vol. 1 No. 1, pp. 289–298. https://doi.org/10.1017/dsi.2019.32CrossRefGoogle Scholar
Helms, M., Vattam, S. S., and Goel, A. K. (2009), “Biologically inspired design: process and products”, Design studies, Vol. 30 No. 5, pp. 606–622. https://doi.org/10.1016/j.destud.2009.04.003CrossRefGoogle Scholar
Hill, B. (2005), “Goal Setting Through Contradiction Analysis in the Bionics-Oriented Construction Process”, Creativity and Innovation Management, Vol. 14 No. 1, pp. 59–65. https://doi.org/10.1111/j.1476-8691.2005.00325.xCrossRefGoogle Scholar
Jia, Z., Yu, Y., and Wang, L. (2019), “Learning from nature: Use material architecture to break the performance tradeoffs”, Materials & Design, Vol. 168, pp. 107650. https://doi.org/10.1016/j.matdes.2019.107650CrossRefGoogle Scholar
Kaiser, M. K., Hashemi, F. H., and Lindemann, U. (2014), “Bioscrabble–the role of different types of search terms when searching for biological inspiration in biological research articles”, In DS 77: Proceedings of the DESIGN 2014 13th International Design Conference, pp. 241–250.Google Scholar
Lenau, T. A., Keshwani, S., Chakrabarti, A., and Ahmed-Kristensen, S. (2015), “Biocards and level of abstraction”, In: 20th International Conference on Engineering Design (ICED), July 27-31 2015, Milan, Italy, pp. 177–186.Google Scholar
Lenau, T., Dentel, A., Ingvarsdóttir, Þ., and Guđlaugsson, T. (2010), “Engineering design of an adaptive leg prosthesis using biological principles”, In DS 60: Proceedings of DESIGN 2010, the 11th International Design Conference, Dubrovnik, Croatia, May 17 – 20 2010, Design Society, Glasgow, pp. 331–340.Google Scholar
Letard, A., Graeff, E., Maranzana, N., Raskin, K., and Aoussat, A. (2020), “How do designers impact the biometric concepts typology?”, In DS 104: Proceedings of the 22nd International Conference on Engineering and Product Design Education (E&PDE 2020), VIA Design, VIA University in Herning, Denmark. 10th-11th September 2020. https://doi.org/10.35199/EPDE.2020.33CrossRefGoogle Scholar
Li, S., Bai, H., Shepherd, R. F., and Zhao, H. (2019), “Bio-inspired Design and Additive Manufacturing of Soft Materials, Machines, Robots, and Haptic Interfaces”, Angewandte Chemie International Edition, Vol. 58 No. 33, pp. 11182–11204. https://doi.org/10.1002/anie.201813402CrossRefGoogle ScholarPubMed
Machado, C. G., Winroth, M. P., and Ribeiro da Silva, E. H. D. (2020), “Sustainable manufacturing in Industry 4.0: an emerging research agenda”, International Journal of Production Research, Vol. 58 No. 5, pp. 1462–1484. https://doi.org/10.1080/00207543.2019.1652777CrossRefGoogle Scholar
Miehe, R., Bauernhansl, T., Beckett, M., Brecher, C., Demmer, A., Drossel, W. G., and Horbelt, J. (2020), “The biological transformation of industrial manufacturing–Technologies, status and scenarios for a sustainable future of the German manufacturing industry”, Journal of Manufacturing Systems, Vol. 54, pp.50–61. https://doi.org/10.1016/j.jmsy.2019.11.006CrossRefGoogle Scholar
Miehe, R., Bauernhansl, T., Schwarz, O., Traube, A., Lorenzoni, A., Waltersmann, L., Full, J., Horbelt, J., and Sauer, A. (2018), “The biological transformation of the manufacturing industry–envisioning biointelligent value adding”, Procedia CIRP, Vol. 72, pp. 739–743. https://doi.org/10.1016/j.procir.2018.04.085CrossRefGoogle Scholar
Miehe, R., Full, J., Scholz, P., Demmer, A., Bauernhansl, T., Sauer, A., and Schuh, G. (2019), “The Biological Transformation of Industrial Manufacturing - Future Fields of Action in Bioinspired and Bio-based Production Technologies and Organization,” in 25th International Conference on Production Research Manufacturing Innovation: Cyber Physical Manufacturing, Chicago, Illinois (USA), August 9-14, Procedia Manufacturing, Vol. 39, pp. 737–744.10.1016/j.promfg.2020.01.437CrossRefGoogle Scholar
Neugebauer, R., Ihlenfeldt, S., Schließmann, U., Hellmich, A., and Noack, M. (2019), “A new generation of production with cyber-physical systems–enabling the biological transformation in manufacturing”, Journal of Machine Engineering, Vol. 19 No. 1, pp. 5–15. https://doi.org/10.5604/01.3001.0013.0440CrossRefGoogle Scholar
Pereira, P.M.M., Monteiro, G.A. and Prazeres, D.M.F. (2015), “General Aspects of Biomimetic Materials”, in Pacheco Torgal, F., Labrincha, J.A., Diamanti, M.V., Yu, C.-P. and Lee, H.K. (Eds.), Biotechnologies and Biomimetics for Civil Engineering, Springer International Publishing, Cham, pp. 57–79. https://doi.org/10.1007/978-3-319-09287-4_3CrossRefGoogle Scholar
San Ha, N., and Lu, G. (2020), “A review of recent research on bio-inspired structures and materials for energy absorption applications”, Composites Part B: Engineering, Vol. 181, pp. 107496. https://doi.org/10.1016/j.compositesb.2019.107496Google Scholar
Sartori, J, Pal, U, Chakrabarti, A. (2010), “A methodology for supporting “transfer” in biomimetic design”, Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Vol. 24 No. 4, pp. 483–505.10.1017/S0890060410000351CrossRefGoogle Scholar
Sayuti, A., and Ahmed-Kristensen, S. (2020), “Understanding emotional responses and perception within new creative practices of biological materials”, In Proceedings of the Sixth International Conference on Design Creativity (ICDC 2020), pp. 144–151. https://doi.org/10.35199/ICDC.2020.18CrossRefGoogle Scholar
Sharma, S., and Sarkar, P. (2019), “Biomimicry: Exploring research, challenges, gaps, and tools”, In Chakrabarti, A. (ed), Research into design for a connected world, Springer, Singapore, Vol. 134, pp. 87–97. https://doi.org/10.1007/978-981-13-5974-3_8CrossRefGoogle Scholar
Svendsen, N., and Lenau, T. A. (2019), “How does biologically inspired design cope with multi-functionality?”, In Proceedings of the Design Society: International Conference on Engineering Design, Cambridge University Press, Vol. 1 No. 1, pp. 349–358. https://doi.org/10.1017/dsi.2019.38CrossRefGoogle Scholar
Thompson, M. K., Moroni, G., Vaneker, T., Fadel, G., Campbell, R. I., Gibson, I., and Martina, F. (2016), “Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints”, CIRP annals, Vol. 65 No. 2, pp. 737–760. https://doi.org/10.1016/j.cirp.2016.05.004CrossRefGoogle Scholar
Ueda, K. (1992), “A concept for bionic manufacturing systems based on DNA-type information”, In Human Aspects in Computer Integrated Manufacturing, pp. 853–863. https://doi.org/10.1016/B978-0-444-89465-6.50078-8CrossRefGoogle Scholar
Vaneker, T., Bernard, A., Moroni, G., Gibson, I., and Zhang, Y. (2020), “Design for additive manufacturing: Framework and methodology”, CIRP Annals, Vol. 69 No. 2, pp. 578–599. https://doi.org/10.1016/j.cirp.2020.05.006CrossRefGoogle Scholar
VDI 6220 (2012), Biomimetics - Conception and Strategy, Beuth, BerlinGoogle Scholar
Voelkl, H., and Wartzack, S. (2018), “Design for composites: tailor-made, bio-inspired topology optimization for fiber-reinforced plastics”, In DS 92: Proceedings of the DESIGN 2018 15th International Design Conference, pp. 499–510. https://doi.org/10.21278/idc.2018.0126CrossRefGoogle Scholar
Wegener, K., Gittler, T., and Weiss, L. (2018), “Dawn of new machining concepts: Compensated, intelligent, bioinspired”, Procedia CIRP, Vol. 77, pp. 1–17. https://doi.org/10.1016/j.procir.2018.08.194CrossRefGoogle Scholar
Weidner, B. V., Nagel, J., and Weber, H. J. (2018), “Facilitation method for the translation of biological systems to technical design solutions”, International Journal of Design Creativity and Innovation, Vol. 6 No. 3-4, pp. 211–234. https://doi.org/10.1080/21650349.2018.1428689CrossRefGoogle Scholar
Whitesides, G. M. (2015), “Bioinspiration: something for everyone,” Interface Focus, Vol. 5 No. 4, pp. 201500312015. https://doi.org/10.1098/rsfs.2015.0031CrossRefGoogle ScholarPubMed
Willocx, M., Ayali, A., and Duflou, J. R. (2020), “Where and how to find bio-inspiration?: A comparison of search approaches for bio-inspired design”, CIRP Journal of Manufacturing Science and Technology, Vol. 31, pp. 61–67. https://doi.org/10.1016/j.cirpj.2020.09.013CrossRefGoogle Scholar
Yargın, G. T., Firth, R. M., and Crilly, N. (2018). “User requirements for analogical design support tools: Learning from practitioners of bio-inspired design”, Design Studies, Vol. 58, pp. 1–35. https://doi.org/10.1016/j.destud.2017.11.006CrossRefGoogle Scholar
Yen, J, Helms, M, Goel, A, Tovey, C, Weissburg, M (2014), “Adaptive evolution of teaching practices in biologically inspired design”, In: Goel, AK, McAdams, DA, Stone, RB (eds) Biologically inspired design - computational methods and tools, Springer, London, pp. 153–199. https://doi.org/10.1007/978-1-4471-5248-4_7CrossRefGoogle Scholar
Zhang, Y., Wang, Z., Zhang, Y., Gomes, S., and Bernard, A. (2020), “Bio-inspired generative design for support structure generation and optimization in Additive Manufacturing (AM)”, CIRP Annals, Vol. 69 No.1, pp. 117–120. https://doi.org/10.1016/j.cirp.2020.04.091CrossRefGoogle Scholar