Hostname: page-component-78c5997874-mlc7c Total loading time: 0 Render date: 2024-11-02T18:55:55.287Z Has data issue: false hasContentIssue false
  • English
  • Français

Incorporating sustainability into product lifecycle management: a systematic literature review

Published online by Cambridge University Press:  16 May 2024

Anne Seegrün ,
Louis Hardinghaus ,
Theresa Riedelsheimer  and
Kai Lindow
Anne Seegrün*
Affiliation:
Fraunhofer IPK, Germany
Louis Hardinghaus
Affiliation:
Fraunhofer IPK, Germany
Theresa Riedelsheimer
Affiliation:
Fraunhofer IPK, Germany
Kai Lindow
Affiliation:
Fraunhofer IPK, Germany
*
[email protected]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

Amidst environmental, regulatory, and societal pressures, integrating sustainability into Product Lifecycle Management (PLM) is key, evolving into Sustainable PLM (sPLM). This paper uses a systematic literature review and text-mining (C-value method) to categorise sPLM research into clusters, assess their integration at organisational levels, and evaluate the level's maturity. Findings highlight a gap in operational sPLM research. Future studies should bridge the gap between theory and industrial application, enhance sPLM operationalisation, and explore emerging technologies’ impact on sPLM.

Keywords

product lifecycle management (PLM)sustainabilityemerging ITsustainability incorporationresearch clusters
Type
Design for Sustainability
Information
Proceedings of the Design Society , Volume 4: DESIGN 2024 , May 2024 , pp. 1437 - 1446
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2024.

References

Armijo, A., Zuloaga, J., Vega, A. and Sorli, M. (2015), “Eco-process engineering system for composition of services to optimize product life-cycle (EPES)”, Procedia Engineering: The Manufacturing Engineering Society International Conference, MESIC 2015, Barcelona, Spain, July 22-24, 2015, Elsevier B.V., Amsterdam, pp. 1081–1088. https://doi.org/10.1016/j.proeng.2015.12.599CrossRefGoogle Scholar
Belkadi, F., Bernard, A. and Laroche, F. (2015), “Knowledge based and PLM facilities for sustainability perspective in manufacturing: A global approach”, Procedia CIRP: 22nd CIRP Conference on Life Cycle Engineering - Efficiency to Effectiveness: Sustainability in Manufacturing, Sydney, Australia, April 7-9, 2015, Elsevier B.V., Amsterdam, pp. 203–208. https://doi.org/10.1016/j.procir.2015.01.065CrossRefGoogle Scholar
Borsato, M. (2014), “Bridging the gap between product lifecycle management and sustainability in manufacturing through ontology building”, Computers in Industry, Vol. 65 No. 2, pp. 258–269. https://doi.org/10.1016/j.compind.2013.11.003Google Scholar
Buchert, T. and Stark, R. (2018), “Decision support tool to derive sustainable product configurations as a basis for conceptual design”, Proceedings of the DESIGN 2018/ 15th International Design Conference, Dubrovnik, Croatia, May 21-24, 2018, The Design Society, Glasgow, pp. 2609–2620. https://doi.org/10.21278/idc.2018.0440CrossRefGoogle Scholar
Ch., F.A., Holland, A. and Fathi, M. (2010), “Advanced knowledge management concept for sustainable environmental integration”, 2010 IEEE 9th International Conference on Cybernetic Intelligent Systems (CIS), Reading, United Kingdom, September 1-2, 2010, IEEE, New York City, pp. 1–7. https://doi.org/10.1109/UKRICIS.2010.5898096Google Scholar
Eigner, M., Faißt, K.-G., Keßler, A., Schäfer, P., Pickel, P. and Seibold, F. (2013), “A concept for an intuitive and interactive fully PLM-integrated eco-efficiency assessment in real-time”, Proceedings of the 19th International Conference on Engineering Design (ICED13) Design for Harmonies, Vol. 5: Design for X, Design to X, Seoul, Korea, August 19-22, 2013, The Design Society, Glasgow, pp. 131–140.Google Scholar
Eigner, M., Hauff, M. von and Schäfer, P.D. (2011), “Sustainable product lifecycle management: A lifecycle based conception of monitoring a sustainable product development”, Glocalized Solutions for Sustainability in Manufacturing: Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, Braunschweig, Germany, May 2-4, 2011, Springer, Berlin, Heidelberg, pp. 501–506. https://doi.org/10.1007/978-3-642-19692-8_87CrossRefGoogle Scholar
Frantzi, K., Ananiadou, S. and Mima, H. (2000), “Automatic recognition of multi-word terms: The C-value/NC-value method”, International Journal on Digital Libraries, Vol. 3 No. 2, pp. 115–130. https://doi.org/10.1007/s007999900023CrossRefGoogle Scholar
Helman, J., Rosienkiewicz, M., Cholewa, M., Molasy, M. and Oleszek, S. (2023), “Towards greenPLM: Key sustainable indicators selection and assessment method development”, Energies, Vol. 16 No. 3. https://doi.org/10.3390/en16031137CrossRefGoogle Scholar
Herrmann, C. (2010), Ganzheitliches Life Cycle Management: Nachhaltigkeit und Lebenszyklusorientierung in Unternehmen, Springer, Berlin, Heidelberg. https://doi.org/ 10.1007/978-3-642-01421-5CrossRefGoogle Scholar
Horizon 2020, Technology readiness levels (TRL). [online] Available at: https://ec.europa.eu/research/parti-cipants/data/ref/h2020/wp/2014_2015/annexes/h2020-wp1415-annex-g-trl_en.pdf (accessed 13.11.2023).Google Scholar
Hribernik, K.A., Stietencron, M. von, Hans, C. and Thoben, K.-D. (2011), “Intelligent products to support closed-loop reverse logistics”, Glocalized Solutions for Sustainability in Manufacturing: Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, Braunschweig, Germany, May 2-4, 2011, Springer, Berlin, Heidelberg, pp. 486–491. https://doi.org/10.1007/978-3-642-19692-8_84CrossRefGoogle Scholar
Leng, J., Ruan, G., Jiang, P., Xu, K., Liu, Q., Zhou, X. and Liu, C. (2020), “Blockchain-empowered sustainable manufacturing and product lifecycle management in industry 4.0: A survey”, Renewable and Sustainable Energy Reviews, Vol. 132. https://doi.org/10.1016/j.rser.2020.110112CrossRefGoogle Scholar
Li, M., Cao, X., Wang, L. and Deng, L. (2016), “The product service lifecycle management based on sustainable development”, 2016 IEEE International Conference on Service Operations and Logistics, and Informatics (SOLI), Beijing, China, July 10-12, 2016, IEEE, New York City, pp. 200–205. https://doi.org/10.1109/SOLI.2016.7551687CrossRefGoogle Scholar
Lin, J., Rohleder, C. and Nurcan, S. (2018), “Material management in LCA integrated PLM”, 2018 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC), Stuttgart, Germany, June 17-20, 2018, IEEE, Piscataway, NJ, pp. 1–9. https://doi.org/10.1109/ICE.2018.8436374Google Scholar
Lindow, K. (2017), Wissensbasierte Entwicklung nachhaltiger Produkte, [PhD Thesis], Technical University Berlin.Google Scholar
Marconi, M. and Germani, M. (2017), “An end of life oriented framework to support the transition toward circular economy”, Proceedings of the 21st International Conference on Engineering Design (ICED 17) Vol 5: Design for X, Design to X, Vancouver, Canada, August 21-25, 2017, The Design Society, Glasgow, pp. 199–208.Google Scholar
Marcos De Oliveira, M., Geraldi Andreatta, L., Stjepandić, J. and Canciglieri Junior, O. (2021), “Product lifecycle management and sustainable development in the context of Industry 4.0: A systematic literature review”, Proceedings of the 28th ISTE International Conference on Transdisciplinary Engineering, Bath, United Kingdom, July 5-9, 2021, IOS Press, Amsterdam, pp. 213–222. https://doi.org/10.3233/ATDE210100Google Scholar
Nahkala, S. (2013), “Aligning product design methods and tools for sustainability”, Re-engineering Manufacturing for Sustainability: Proceedings of the 20th CIRP International Conference on Life Cycle Engineering, Singapore, April 17-19, 2013, Springer, Singapore, pp. 53–58. https://doi.org/10.1007/978-981-4451-48-2_9CrossRefGoogle Scholar
Papinniemi, J., Fritz, J., Hannola, L., Denger, A. and Lampela, H. (2014), “Lifecycle-based requirements of product-service system in customer-centric manufacturing”, Product Lifecycle Management for a Global Market: 11th IFIP WG 5.1 International Conference, PLM 2014, Yokohama, Japan, July 7-9, 2014, Springer, Berlin, Heidelberg, pp. 435–444. https://doi.org/10.1007/978-3-662-45937-9_43CrossRefGoogle Scholar
Quesada Díaz, R. and Syberfeldt, A. (2022), “Optimised shop-floor operator support on an integrated AR and PLM framework for remanufacturing”, SPS2022: Proceedings of the 10th Swedish Production Symposium, Skövde, Sweden, April 26-29, 2022, IOS Press, Amsterdam, pp. 425–434. https://doi.org/10.3233/ATDE220161Google Scholar
Rosich, M.B., Le Duigou, J. and Bosch-Mauchand, M. (2013), “Implementing sustainable supply chain in PLM”, Advances in Production Management Systems: Competitive Manufacturing for Innovative Products and Services: IFIP WG 5.7 International Conference, APMS 2012, Rhodes, Greece, September 24-26, 2012, Springer, Berlin, Heidelberg, pp. 168–175. https://doi.org/10.1007/978-3-642-40361-3_22Google Scholar
Rubio, L.R., Martin-Mariscal, A. and Peralta, E. (2023), “First approach to a theoretical framework for carbon footprint management in the aerospace manufacturing industry”, Product Lifecycle Management. PLM in Transition Times: The Place of Humans and Transformative Technologies: 19th IFIP WG 5.1 International Conference, PLM 2022, Grenoble, France, July 10-13, 2022, Springer, Cham, pp. 620–629. https://doi.org/10.1007/978-3-031-25182-5_60CrossRefGoogle Scholar
Salonitis, K. and Stavropoulos, P. (2013), “On the integration of the CAx systems towards sustainable production”, Procedia CIRP: 2nd CIRP Global Web Conference - Beyond modern manufacturing: Technology for the factories of the future, June 11-12, 2013, Elsevier B.V., Amsterdam, pp. 115–120. https://doi.org/10.1016/j.procir.2013.06.178CrossRefGoogle Scholar
Trotta, M.G. (2010), “Product lifecycle management: Sustainability and knowledge management as keys in a complex system of product development”, Journal of Industrial Engineering and Management, Vol. 3 No. 2, pp. 309–322. https://doi.org/10.3926/jiem.2010.v3n2. p 309-322CrossRefGoogle Scholar
Vadoudi, K., Allais, R., Reyes, T. and Troussier, N. (2014a), “Sustainable product lifecycle management and territoriality: New structure for PLM”, Product Lifecycle Management for a Global Market: 11th IFIP WG 5.1 International Conference, PLM 2014, Yokohama, Japan, July 7-9, 2014, Springer, Berlin, Heidelberg, pp. 475–484. https://doi.org/10.1007/978-3-662-45937-9_47CrossRefGoogle Scholar
Vadoudi, K., Bratec, F. and Troussier, N. (2017), “A GIS-oriented semantic data model to support PLM for DfS”, International Journal of Product Lifecycle Management, Vol. 10 No. 3, pp. 210–230. https://doi.org/10.1504/IJPLM.2017.087572CrossRefGoogle Scholar
Vadoudi, K. and Troussier, N. (2015), “A sustainable product model”, Proceedings of the 20th International Conference on Engineering Design (ICED 15), Milano, Italy, July 27-30, 2015, The Design Society, Glasgow, pp. 51–60.Google Scholar
Vadoudi, K., Troussier, N. and Zhu, T.W. (2014b), “Toward sustainable manufacturing through PLM, GIS and LCA interaction”, 2014 IEEE International Conference on Engineering, Technology and Innovation (ICE), Bergamo, Italy, June 23-25, 2014, IEEE, New York City, pp. 1–7. https://doi.org/10.1109/ICE.2014.6871545Google Scholar
Vieira, D.R., Vieira, R.K. and Chain, M.C. (2016), “Elements of managerial integration for sustainable product lifecycle management”, International Journal of Product Lifecycle Management, Vol. 9 No. 2, p. 87. https://doi.org/10.1504/IJPLM.2016.079762CrossRefGoogle Scholar
Vila, C., Abellán-Nebot, J.V., Albiñana, J.C. and Hernández, G. (2015), “An approach to sustainable product lifecycle management (Green PLM)”, Procedia Engineering: The Manufacturing Engineering Society International Conference, MESIC 2015, Barcelona, Spain, July 22-24, 2015, Elsevier B.V., Amsterdam, pp. 585–592. https://doi.org/10.1016/j.proeng.2015.12.608CrossRefGoogle Scholar
Velasquez, Villamil, Salehi, C., and Hallstedt, N., S.I. (2020), “How can information and communications technology support the link between circular economy and product lifecycle management - A review”, Proceedings of the DESIGN 2020/ 16th International Design Conference, October 26-29, 2020, The Design Society, Glasgow, pp. 2187–2196. https://doi.org/10.1017/dsd.2020.299Google Scholar
Witherell, P., Morris, K.C., Narayanan, A., Lee, J.H., Rachuri, S. and Kumara, S. (2013), “Sustainability through lifecycle synthesis of material information”, Re-engineering Manufacturing for Sustainability: Proceedings of the 20th CIRP International Conference on Life Cycle Engineering, Singapore, April 17-19, 2013, Springer, Singapore, pp. 571–576. https://doi.org/10.1007/978-981-4451-48-2_93CrossRefGoogle Scholar
Zhang, H., Ouzrout, Y., Bouras, A. and Savino, M.M. (2014), “Sustainability consideration within product lifecycle management through maturity models analysis”, International Journal of Services and Operations Management, Vol. 19 No. 2, pp. 151–169. https://doi.org/10.1504/IJSOM.2014.065330CrossRefGoogle Scholar
Zhang, L., Olsen, A. and Lobov, A. (2022), “An ontology-based KBE application for supply chain sustainability assessment”, Resources, Environment and Sustainability, Vol. 10. https://doi.org/10.1016/j.resenv.2022.100086CrossRefGoogle Scholar
Zhao, W.-B., Jeong, J.-W., Noh, S.D. and Yee, J.T. (2015), “Energy simulation framework integrated with green manufacturing-enabled PLM information model”, International Journal of Precision Engineering and Manufacturing-Green Technology, Vol. 2 No. 3, pp. 217–224. https://doi.org/10.1007/s40684-015-0025-8CrossRefGoogle Scholar
Zhao, W.-B., Park, Y.H., Lee, H.Y., Jun, C.M. and Do Noh, S. (2012), “Design and implementation of a PLM system for sustainable manufacturing”, Product Lifecycle Management. Towards Knowledge-Rich Enterprises: IFIP WG 5.1 International Conference, PLM 2012, Montreal, Canada, July 9-11, 2012, Springer, Berlin, Heidelberg, pp. 202–212. https://doi.org/10.1007/978-3-642-35758-9_18CrossRefGoogle Scholar