Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-22T20:17:12.388Z Has data issue: false hasContentIssue false
  • English
  • Français

Design and evaluation of non-planar material extrusion on a 3-axis printer

Published online by Cambridge University Press:  16 May 2024

Samuel Bengtsson ,
Axel Nordin  and
Jože Tavčar
Samuel Bengtsson
Affiliation:
Lund University, Sweden
Axel Nordin
Affiliation:
Lund University, Sweden
Jože Tavčar*
Affiliation:
Lund University, Sweden
*
[email protected]

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

The use of material extrusion (MEX) has increased rapidly due to the affordability of 3D printers. This has led to a growing demand for improved print quality, high fidelity, strength, or fast print times. In this study, a non-planar approach for better surface quality is investigated. The hardware of a 3-axis MEX printer was developed together with testing new software for non-planar slicing. The aim was to identify the most influential parameter combinations using design of experiments. A novel method for measuring surface quality was presented together with future research work.

Keywords

non-planar material extrusionadditive manufacturingdesign of experimentsnozzle design3D printing
Type
Design for Additive Manufacturing
Information
Proceedings of the Design Society , Volume 4: DESIGN 2024 , May 2024 , pp. 1727 - 1736
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
The Author(s), 2024.

References

Ahlers, D. & Wasserfall, F., Hendrich, N. & Zhang, J. (2019). 3D Printing of Nonplanar Layers for Smooth Surface Generation. IEEE 15th International Conference on Automation Science and Engineering (CASE). https://dx.doi.org/10.13140/RG.2.2.34888.26881.CrossRefGoogle Scholar
Ali, F., Chowdary, B. V., & Maharaj, J. (2014). Influence of Some Process Parameters on Build Time, Material Consumption, and Surface Roughness of FDM Processed Parts : Inferences Based on the Taguchi Design of Experiments. The 2014 IAJC/ISAM Joint International Conference. Orlando.Google Scholar
Antony, J. (2014), Design of Experiments for Engineers and Scientists (Second Edition), Elsevier. https://dx.doi.org/10.1016/C2012-0-03558-2.Google Scholar
Bengtsson, S. (2023), Hardware Design and Evaluation of Non-planar Fused Deposition Modelling on a 3-axis printer, Master's Degree, Lund University, LTH, Product Development, Sweden.CrossRefGoogle Scholar
Bradley, J., Douglas, C. M. (2019), Design of Experiments: A Modern Approach, Wiley.Google Scholar
Buchanan, B. (2018, July 28). Script to find the area of shapes in Adobe Illustrator. ([bryanbuchanan], Producer) Retrieved November 25, 2022, from Github: https://gist.github.com/bryanbuchanan/11387501Google Scholar
Chakraborty, D., Reddy, B., & Choudhury, A. (2008), Extruder path generation for Curved Layer Fused Deposition Modeling. Computer-Aided Design, Vol. 40 No. 2, pp. 235-243, https://doi.org/10.1016/j.cad.2007.10.014.CrossRefGoogle Scholar
Diegel, O., Singamneni, S., Huang, B., Gibson, I. (2011), “Curved Layer Fused Deposition Modelling”, in Conductive Polymer Additive Manufacturing, Advanced Materials Research, Vol. 199-200, pp.1984-1987, https://doi.org/10.4028/www.scientific.net/AMR.199-200.1984.Google Scholar
Diegel, O. (2022), Design for AM, In: A Guide to Additive Manufacturing, Godec, D., et al., (eds.) Springer, pp 75 - 118, (Springer Tracts in Additive Manufacturing), https://doi.org/10.1007/978-3-031-05863-9.CrossRefGoogle Scholar
Godec, D., Gonzalez-Gutierrez, J., Nordin, A., Pei, E. & Ureña Alcázar, J. (eds.) (2022), A Guide to Additive Manufacturing. Springer Tracts in Additive Manufacturing, https://doi.org/10.1007/978-3-031-05863-9.CrossRefGoogle Scholar
Filemon, S. (2016), How expiring patents are ushering in the next generation of 3D printing. Retrieved September 25, 2022, from Techcrunch: https://techcrunch.com/2016/05/15/.Google Scholar
Huang, B., and Singamneni, S.B. (2015), “Curved Layer Adaptive Slicing (CLAS) for fused deposition modelling”, Rapid Prototyping Journal, Vol. 21, No. 4, pp. 354 – 367, https://doi.org/10.1108/RPJ-06-2013-0059.CrossRefGoogle Scholar
Kalmanovich, G. et al. (1997), “Curved-layer Laminated Object Manufacturing”, in Proceedings of the 7th International Conference on Rapid Prototyping, San Francisco, University of Dayton, USA, pp. 51-59.Google Scholar
Mitropoulou, I., Bernhard, M., & Dillenburger, B. (2020). Print Paths Key-framing Design for non-planar layered robotic FDM printing. Symposium on Computational Fabrication. Virtual event. https://dx.doi.org/10.1145/3424630.3425408.CrossRefGoogle Scholar
Mitropoulou, I., Bernhard, M., & Dillenburger, B. (2022). Nonplanar 3D Printing of Bifurcating Forms. 3D Printing and Additive Manufacturing, 9(3), 189-202. http://doi.org/10.1089/3dp.2021.0023.CrossRefGoogle ScholarPubMed
Nayyeri, P., Zareinia, K. & Bougherara, H. (2022), Planar and nonplanar slicing algorithms for fused deposition modeling technology: a critical review. The International Journal of Advanced Manufacturing Technology, Vol. 119, pp. 2785–2810, https://doi.org/10.1007/s00170-021-08347-x.CrossRefGoogle Scholar
NIST (2012), How do you select an experimental design? In NIST/SEMATECH e-Handbook of Statistical Methods, https://doi.org/10.18434/M32189, Retrieved November 20, 2022, from NIST: https://www.itl.nist.gov/div898/handbook/pri/section3/pri33.htmGoogle Scholar
Prusa3d. (2022). Extrusion multiplier calibration. Retrieved October 23, 2022, from https://help.prusa3d.com/article/extrusion-multiplier-calibration_2257Google Scholar
Rowley, J. (2017, January 27). V6-NOZZLE-ALL. Retrieved October 15, 2022, from E3D-wiki: https://wiki.e3d-online.com/File:V6-NOZZLE-ALL.pdf.Google Scholar
Tavčar, J. & Nordin, A. (2021), Multi-criteria assessment and process selection model for additive manufacturing in the conceptual phase of design, In: Proceedings of the Design Society. 1, pp. 2197-2206, https://doi.org/10.1017/pds.2021.481.Google Scholar
Wütrich, M., Gubser, M., Elspass, W. J., & Jaeger, C. (2021, September 21). A Novel Slicing Strategy to Print Overhangs without Support Material. Applied Sciences, https://doi.org/10.3390/app11188760.CrossRefGoogle Scholar
Zhao, D., Zhu, G., He, J. and Guo, W. (2023), "An initial feasibility study into ray-based slicing for revolving thin-wall parts using a rotary 3D printer", Rapid Prototyping Journal, Vol. 29, No. 1, pp. 128-144, https://doi.org/10.1108/RPJ-09-2021-0226.CrossRefGoogle Scholar