Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-24T15:37:03.360Z Has data issue: false hasContentIssue false
  • English
  • Français

ZrC Thin Films Grown by Pulsed Laser Deposition

Published online by Cambridge University Press:  15 February 2011

V. Craciun ,
D. Craciun ,
J. M. Howard  and
R. K. Singh
V. Craciun
Affiliation:
Major Analytical Instrumentation Center, Materials Science and Engineering, University of Florida, Gainesville, FL 326110
D. Craciun
Affiliation:
Laser Department, National Institute for Laser, Plasma, and Radiation Physics, Bucharest, Romania
J. M. Howard
Affiliation:
Materials Science and Engineering, University of Florida, Gainesville, FL 326110
R. K. Singh
Affiliation:
Materials Science and Engineering, University of Florida, Gainesville, FL 326110
Get access

Abstract

ZrC thin films were grown on Si substrates by the pulsed laser deposition (PLD) technique. X- ray photoelectron spectroscopy, x-ray diffraction and reflectivity, variable angle spectroscopic ellipsometry, and four point probe measurements were used to investigate the composition, density, thickness, surface morphology, optical and electrical properties of the grown structures. It has been found that crystalline films could be grown only by using fluences above 6 J/cm2 and substrate temperatures in excess of 500 °C. For a fluence of 10 J/cm2 and a substrate temperature of 700 °C, highly (100)-textured ZrC films exhibiting a cubic structure (a=0.469 nm) and a density of 6.7 g/cm3 were deposited. The use of a low-pressure atmosphere of C2H2 had a beneficial effect on crystallinity and stoichiometry of the films. All films contained high levels of oxygen contamination, especially in the surface region, because of the rather reactive nature of Zr atoms.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 780: Symposium Y – Advanced Optical Processing of Materials , 2003 , Y3.13
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

references

1. Temple, D., Mat. Sci. Engr. R24, 185 (1999).Google Scholar
2. Handbook of Chemistry and Physics 78th edition, CRC Press LLC, editor Lide, D. R., p. 4–98, (1997-1998)Google Scholar
3. Charbonnier, F. M., Mackie, W. A., Hartman, R. L., and Xie, T., J. Vac. Sci. Technol. B19, 1064 (2001)Google Scholar
4. Xie, T., Mackie, W. A., and Davis, P. R., J. Vac. Sci. Technol. J. Vac. Sci. Technol. B19, 2090 (1996).Google Scholar
5. Hollabaugh, C. M., Wahman, L. A., Reiswig, R. D., White, R. W., and Wagner, P., Nuclear Technology 35, 527 (1997).Google Scholar
6. Glass, J. A., Palmasiano, N., and Welsh, R. E., Mater. Res. Soc. Symp. Proc. 555, 185 (1999).Google Scholar
7. Girolami, G. S., Jensen, J. A., Gozum, E., and Pollina, D. M., Mater. Res. Soc. Sim. Proc. 327, 127 (1988)Google Scholar
8. Alessio, L. D., Santagata, A., Teghil, R., Zaccagnino, M., Zacardo, I., Marotta, V., Ferro, D., and DeMaria, G., Applied Surface Science 168, 284 (2000).Google Scholar
9. Howard, J. M., Craciun, V., Essary, C., Singh, R. K., Appl. Phys. Lett. 81, 3431 (2002).Google Scholar