Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-02T21:02:30.389Z Has data issue: false hasContentIssue false

Towards Better Understanding of High Efficiency Cd-free CIGS Solar Cells Using Atomic Layer Deposited Indium Sulfide Buffer Layers

Published online by Cambridge University Press:  01 February 2011

N. Naghavi
Affiliation:
Laboratoire d'Electrochimie (LECA, UMR 7575 CNRS), Ecole Nationale Supérieure de Chimie de Paris, 11 rue Pierre et Marie Curie, 75231 Paris, France
S. Spiering
Affiliation:
Zentrum für Sonnenenergie-und Wasserstoff-Forschung Baden-Württemberg, Hessbruehlstrasse 21 C, 70565 Stuttgart, Allemagne
M. Powalla
Affiliation:
Zentrum für Sonnenenergie-und Wasserstoff-Forschung Baden-Württemberg, Hessbruehlstrasse 21 C, 70565 Stuttgart, Allemagne
B. Canava
Affiliation:
Institut Lavoisier (IREM, UMR 8637 CNRS), Université de Versailles-Saint-Quentin, 45 av des Etats Unis, 78035 Versailles, France
A. Taisne
Affiliation:
EDF R&D, Avenue des Renardières, Ecuelles, 77818 Moret-sur-loing Cedex, France
J.-F. Guillemoles
Affiliation:
Laboratoire d'Electrochimie (LECA, UMR 7575 CNRS), Ecole Nationale Supérieure de Chimie de Paris, 11 rue Pierre et Marie Curie, 75231 Paris, France
S. Taunier
Affiliation:
EDF R&D, Avenue des Renardières, Ecuelles, 77818 Moret-sur-loing Cedex, France
A. Etcheberry
Affiliation:
Institut Lavoisier (IREM, UMR 8637 CNRS), Université de Versailles-Saint-Quentin, 45 av des Etats Unis, 78035 Versailles, France
D. Lincot
Affiliation:
Laboratoire d'Electrochimie (LECA, UMR 7575 CNRS), Ecole Nationale Supérieure de Chimie de Paris, 11 rue Pierre et Marie Curie, 75231 Paris, France
Get access

Abstract

This paper presents optimization studies on the formation of cadmium free buffer layers for high efficiency copper indium diselenide (CIGS) thin film solar cells using a vapor phase route. Indium sulfide layers have been deposited on CIGS substrates by Atomic Layer Deposition (ALD) at substrate temperatures between 140 and 260 °C using indium acetylacetonate and hydrogen sulfide precursors. The parametric study of the deposition temperature shows an optimal value at about 220°C, leading to an efficiency of 16.4 % which is a technological breakthrough. The analysis of the device shows that indium sulfide layers give an improvement of the blue response of the cells as compared a standard CdS processed cell, due to a high apparent band gap (2.7-2.8 eV), higher open circuit voltages (up to 665 mV) and fill factor (78 %). This denotes high interface quality of the system. Atomic diffusion processes of sodium and copper in the buffer layer are evidenced.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Yousfi, E. B., Weinberger, B., Donsanti, F., Cowache, P. and Lincot, D.. Thin Solid Films 387, 29 (2001).Google Scholar
2. Spiering, S., Hariskos, D., Powalla, M., Naghavi, N., Lincot, D., Thin Solid Films (2003) (in press).Google Scholar
3. Canava, B., Vigneron, J., Etcheberry, A., Guimard, D., Grand, P.P., Guillemoles, J.-F., Lincot, D., Hamatly, S. Ould Saad, Djebbour, Z., Mencaraglia, D., Thin Solid Films (2003) (in press).Google Scholar
4. Naghavi, N., Henriquez, R., Laptev, V. and Lincot, D., Appl. Surf. Science (submitted).Google Scholar
5. Nomura, R., Konishi, K., Matsuda, H. Thin Solid Films 198, 337 (1991).Google Scholar
6. Yousfi, E. B., Weinberger, B., Donsanti, F., Cowache, P. and Lincot, D.. Thin Solid Films 387 29 (2001).Google Scholar
7. Barreau, N., Bernede, J. C. and Marsillac, S.. Journal of Crystal Growth 241, 51 (2002).Google Scholar
8. Bareau, N., Bernede, J. C., Deudon, C., Brohan, L., Marsillac, S., J. of Cryst. Growth 241 4 (2002).Google Scholar
9. Bareau, N., Bernede, J. C., Marsillac, S., Mokrani, A., J. of Cryst. Growth 235, 439 (2002).Google Scholar
10. Klein, A., Fritsche, J., Jaegermann, W., Schon, J.H., Kloc, Ch., Bucher, E., Appl. Surf. Science 166, 508 (2000).Google Scholar