Hostname: page-component-78c5997874-v9fdk Total loading time: 0 Render date: 2024-11-02T23:37:30.086Z Has data issue: false hasContentIssue false
  • English
  • Français

TiSi2 Integrity within a Doped Silicide Process Step

Published online by Cambridge University Press:  25 February 2011

G. M. Crean ,
P. D. Cole  and
J. Stoemenos
G. M. Crean
Affiliation:
National Microelectronics Research Center, Lee Makings, Prospect Row, Cork, Ireland.
P. D. Cole
Affiliation:
National Microelectronics Research Center, Lee Makings, Prospect Row, Cork, Ireland.
J. Stoemenos
Affiliation:
Physics Department, University of Thessaloniki, Thessaloniki, Greece.
Get access

Abstract

Degradation of arsenic implanted titanium suicide (TiSi2) thin films as a result of thermal processing for shallow junction formation is investigated. Significant arsenic diffusion from the suicide overlayer into the silicon substrate has been detected by Rutherford Backscattering Spectrometry at drive-in temperatures > 1050°C. Cross-sectional transmission electron micrographs have shown the suicide film become increasingly non-uniform as the thermal budget increases, ultimately leading to discontinuities forming in the suicide film. This observed degradation of the titanium suicide film is also supported by sheet resistance measurements which show the film to degrade significantly above a threshold thermal budget

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 279: Symposium A – Beam-Solid Interactions–Fundamentals and Applications , 1992 , 307
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Kwong, D. L., Ku, Y. H., Lee, S. K., Louis, E., Alvi, N. S. and Chu, P., J. Appl. Phys., 61 (11), 1987 Google Scholar
[2] Jiang, H., Osburn, C. M., Xiao, Z. G., McGuire, G. and Rozgonyi, G. A., Proc. Sixth International Symp. on Silicon Material Science and Technology, The Electrochemical Society Inc., Vol. 90–7, pp 862–876, 1990 Google Scholar
[3] Biersack, J. P. and Haggmark, L. G., Nucl. Inst. Methods, 174, 1980 Google Scholar
[4] Crean, G. M., Cole, P. D. and Jeynes, C., Solid State Electronics, 33 (6), pp 655–658, 1990 CrossRefGoogle Scholar
[5] Cole, P. D., Crean, G. M., Lorentz, J. and Dupas, L., Nucl. Instrum and Meth in Phys Res B55, 763–768, 1991 Google Scholar
[6] Crean, G. M. and Cole, P. D., Fourth Periodic Progress Report, CEC ESPRIT STORM Project 2197.Google Scholar
[7] Dupuy, M., Microsc, J.. Spectrosc. Electron, 9, 1984 Google Scholar
[8] Jiang, H., Osburn, C. M., Xiao, Z. G., McGuire, G. and Rozgonyi, G. A., Proc. 19th European Solid State Device Research Conference, Berlin, Springer-Verlag, pp 241–247, 1989.Google Scholar