Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-28T22:29:46.240Z Has data issue: false hasContentIssue false
  • English
  • Français

Synthesis and Processing of High Capacity, High Cycle life and High Discharge Rate Defective Manganospinel films for Rechargeable batteries

Published online by Cambridge University Press:  01 February 2011

Deepika Singh ,
Heinrich Hofmann ,
Won-Seok Kim ,
Valentin Craciun  and
Rajiv K. Singh
Deepika Singh
Affiliation:
Powder Technology Laboratory (LTP), Department of Materials Science, Swiss Federal Institute of Technology (EPFL), CH 1015 Lausanne, Switzerland.
Heinrich Hofmann
Affiliation:
Powder Technology Laboratory (LTP), Department of Materials Science, Swiss Federal Institute of Technology (EPFL), CH 1015 Lausanne, Switzerland.
Won-Seok Kim
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, Florida 32611, USA
Valentin Craciun
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, Florida 32611, USA
Rajiv K. Singh
Affiliation:
Department of Materials Science and Engineering, University of Florida, Gainesville, Florida 32611, USA
Get access

Abstract

Significant effort to develop a robust rechargeable battery has been put in the past two decades. The efforts were mainly focused on developing rechargeable battery systems which exhibit high capacity, long cycle life and high discharge rate capabilities. LiMn2O4 based cathodes have been researched extensively as they are not only economical but also environmentally desirable. Research includes composition and doping variation, formation of novel phases and microstructural tailoring, but none of the material modifications have successfully satisfied all the above mentioned performance criteria. In this paper we show a correlation between processing parameters, microstructure and electrochemical performance of Li-Mn-O cathode films. In addition we discuss the formation of metastable oxygen-rich lithium manganospinels, using a unique ultraviolet assisted deposition process. These defective films exhibit high capacity (> 230 mAh/gm), long cycle life (less than 0.05 % capacity loss per cycle for the first 700 cycles), and high discharge rates (> 25 C for 25 % capacity loss). The long cycle life and high capacity was attributed to the ability to cycle the Mn+ valence to less than 3.5 without onset of Jahn-Teller structural transformation, while the high discharge rate was attributed to the extremely high diffusivity of Li+ in the defective Li1-δMn2-2δO4 phase.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 730: Symposium V – Materials for Energy Storage, Generation, and Transport , 2002 , V1.12
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Tarascon, J. M., & Armand, M, Nature 414, 359–367 (2001).Google Scholar
2. Amatucci, G. G., Pereira, N., Zheng, T., & Tarascon, J. M., J. Electrochem. Soc. 148, A171–A182 (2001).Google Scholar
3. Thackeray, M. M., David, W. I. F., Bruce, P. G., & Goodenough, J. B., Mater. Res. Bull. 18, 461–472 (1983).Google Scholar
4. Chiang, Y. M., Sadoway, D. R., Jang, Y. I., Huang, B., & Wang, H., Electrochem. Solid-State Lett. 2, 107–110 (1999).Google Scholar
5. Xia, Y., & Yoshio, M., J. Electrochem. Soc. 144, 4186–4194 (1997).Google Scholar
6. Bates, J. B., et al. Prefered orientation of polycrystalline LiCoO2 films. J. Electrochem. Soc. 147, 59–70 (2000).Google Scholar
7. Che, G., Lakshmi, B., Fisher, E., & Martin, C, Nature 393, 346–349 (1998).Google Scholar
8. Guyomard, D., & Tarascon, J. M, J. Electrochem. Soc. 139, 937–947 (1992).Google Scholar
9. Thackeray, M. M., J. Electrochem. Soc. 142, 2558–2563 (1995).Google Scholar
10. Masquelier, C., et al., J. Solid. State Chem. 123, 225–266 (1996).Google Scholar
11. Kilroy, W. P., Ferrando, W. A., & Dallek, S., J. Power Sources 97-98, 336–343 (2001).Google Scholar
12. Kock, A. de, et al. Defect spinel in the system Li2O·yMnO2(y>2.5):, Mater. Res. Bull. 25, 657–664 (1990).2.5):,+Mater.+Res.+Bull.+25,+657–664+(1990).>Google Scholar
13. Gummow, R. J., Kock, A. de., & Thackeray, M. M., Solid State Ionics 69, 59–67 (1994).Google Scholar
14. Craciun, V., & Singh, R. K, Electrochem. Solid-State Lett. 2, 446–447 (1999).Google Scholar
15. Craciun, V., & Singh, R. K., Appl. Phys. Lett. 76, 1932–1934 (2000).Google Scholar
16. Singh, R. K., & Narayan, J., Phys. Rev. B 41, 8843–8859 (1990).Google Scholar
17. Kumar, D., & Singh, R. K., J. Vac. Sci. & Techn. A (in press) (2002).Google Scholar
18. Singh, R. K., et al. J. Electrochem. Soc. (submitted).Google Scholar