Hostname: page-component-78c5997874-v9fdk Total loading time: 0 Render date: 2024-11-07T21:27:40.919Z Has data issue: false hasContentIssue false
  • English
  • Français

Stress Control in Sputtered Silicon Nitride Films

Published online by Cambridge University Press:  10 February 2011

M. J. Mescher ,
M. L. Reed  and
T. E. Schlesinger
M. J. Mescher
Affiliation:
ECE Department, Carnegie Mellon University, Pittsburgh, PA 15213, [email protected]
M. L. Reed
Affiliation:
ECE Department, Carnegie Mellon University, Pittsburgh, PA 15213, [email protected]
T. E. Schlesinger
Affiliation:
ECE Department, Carnegie Mellon University, Pittsburgh, PA 15213, [email protected]
Get access

Abstract

We show that stress in sputter-deposited silicon nitride films can be controlled, making either compressive or tensile stress films achievable. These films were deposited via reactive rf magnetron sputtering using an elemental Si target and N2 as a reactive gas in an Ar ambient. Variation of stress as a function of deposition pressure and N2/Ar gas mixture ratio was examined over a wider range of these two parameters than in previous work. More importantly, this parameter space includes conditions which produce near-stoichiometric Si3N4 films over a wide range of deposition pressures. We demonstrated that both low compressive stress and even tensile stress can be achieved at the proper deposition conditions. The film stresses as a function of deposition pressure or N2/Ar gas flow ratio are explained in the context of previously developed peening models.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 472: Symposium I – Polycrystalline Thin Films - Structure, Texture, Properties..III , 1997 , 239
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Berg, S., Blom, H-O., Larsson, T., and Nender, C., “Modelling of Reactive Sputtering of Compound Materials,” J. Vac. Sci. Technol. A 5, 202–7, 1987.Google Scholar
[2] Berg, S., Larsson, T., Blom, H-O., “The Use of Nitrogen Flow as a Deposition Rate Control in Reactive Sputtering,” J. Vac. Sci. Technol. A 4, 594–7, 1986.Google Scholar
[3] Berg, S., Larsson, T., Nender, C., and Blom, H-O., “Predicting Thin-film Stoichiometry in Reactive Sputtering,” J. Appl. Phys. 63, 887–91, 1988.Google Scholar
[4] Larsson, T., Blom, H-O., Nender, C., and Berg, S., “A Physical Model for Eliminating Instabilities in Reactive Sputtering,” J. Vac. Sci. Technol. A 6, 1832–6, 1988.Google Scholar
[5] Larsson, T., Blom, H-O., and Berg, S., “Reactive Sputtering of Titanium Boridé,” Thin Solid Films 172, 133–40, 1989.Google Scholar
[6] Berg, S., Blom, H-O., Moradi, M., and Nender, C., “Process Modeling of Reactive Sputtering,” J. Vac. Sci. Technol. A 7, 1225–9, 1989.Google Scholar
[7] Serikawa, T. and Okamoto, A., “Effect of N2-Ar Mixing on the Reactive Sputtering Characteristics of Silicon,” Thin Solid Films 101, 1–6, 1983.Google Scholar
[8] Carriere, T., et. al, “Characterization of Silicon Nitride Films Deposited on GaAS by RF Magnetron Cathodic Sputtering,”/ Elect. Soc. 137, 1582–7, May 1990.Google Scholar
[9] Qiu, X. and Gyarmati, E., “Composition and Properties of SiNx Films Produced by Reactive R.F. Magnetron Sputtering,” Thin Solid Films 151, 223–33, 1987.Google Scholar
[10] Tan, S. and Schlesinger, T. E., “The Role of Si3N4 Layers in Determining the Texture of Sputter Deposited LiNb03 Thin Films,” Applied Physics Letters 68, 2651–53, May 1996.Google Scholar
[11] Fang, W. and Wickert, J., “Comments on Measuring Thin-film Stresses Using Bi-layer Micromachined Beams,”/ Micromech. Microeng. 5, 276–81, 1995.Google Scholar
[12] Hoffman, D. W. and Thornton, J. A., “Internal Stresses in Sputtered Chromium,” Thin Solid Films 40, 355–63, 1977.Google Scholar
[13] Thornton, J. A. and Hoffman, D. W., “Internal Stresses in Titanium, Nickel, Molybdenum, and Tantalum Films Deposited by Cylindrical Magnetron Sputtering,” J. Vac. Sci. Technol. 14, 164–8, 1977.Google Scholar
[14] Hoffman, D. W. and Thornton, J. A., “Compressive Stress and Inert Gas in Mo Films Sputtered from a Cylindrical-post Magnetron with Ne, Ar, Kr, and Xe,” J. Vac. Sci. Technol. 17, 380–3, 1980.Google Scholar
[15] Mogab, C. J., et. al., “Effect of Reactant Nitrogen Pressure on the Microstructure and Properties of reactively Sputtered Silicon Nitride Films,” J. Elect. Soc. 122, 815–22, June 1975.Google Scholar