Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-27T19:06:53.018Z Has data issue: false hasContentIssue false

Stress Adjustment and Characteristics Improvement in a 1.8GHz Range Film Bulk Acoustic Wave Resonator by Using Multi-layer Structure of ZnO/A12O3/SiO2

Published online by Cambridge University Press:  11 February 2011

Masaki Takeuchi
Affiliation:
Murata Mfg. Co., Ltd., 2–26–10 Tenjin, Nagaoka-kyo, Kyoto, Japan
Hajime Yamada
Affiliation:
Murata Mfg. Co., Ltd., 2–26–10 Tenjin, Nagaoka-kyo, Kyoto, Japan
Hideki Kawamura
Affiliation:
Murata Mfg. Co., Ltd., 2–26–10 Tenjin, Nagaoka-kyo, Kyoto, Japan
Yoshihiko Goto
Affiliation:
Murata Mfg. Co., Ltd., 2–26–10 Tenjin, Nagaoka-kyo, Kyoto, Japan
Tadashi Nomura
Affiliation:
Murata Mfg. Co., Ltd., 2–26–10 Tenjin, Nagaoka-kyo, Kyoto, Japan
Hiroyuki Fujino
Affiliation:
Murata Mfg. Co., Ltd., 2–26–10 Tenjin, Nagaoka-kyo, Kyoto, Japan
Yukio Yoshino
Affiliation:
Murata Mfg. Co., Ltd., 2–26–10 Tenjin, Nagaoka-kyo, Kyoto, Japan
Takahiro Makino
Affiliation:
Murata Mfg. Co., Ltd., 2–26–10 Tenjin, Nagaoka-kyo, Kyoto, Japan
Seiichi Arai
Affiliation:
Murata Mfg. Co., Ltd., 2–26–10 Tenjin, Nagaoka-kyo, Kyoto, Japan
Get access

Abstract

Stress adjustment and improvement of electrical characteristics in film bulk acoustic wave resonator (BAW) have been successfully carried out in 1.8GHz range by using a multi-layer structure of ZnO / Al2O3 / SiO2. The BAW resonator, designed on secondary harmonics at about 1.8GHz, has Al / ZnO / Al / Al2O3 / SiO2 structure. ZnO and SiO2 thin films have a negative and a positive temperature coefficient of sound velocity, respectively. So temperature coefficient of frequency (TCF) of the BAW resonator can be controlled by the thickness ratio of ZnO and SiO2 thin films. Since both ZnO and SiO2 have compressive stress, and Al2O3 has tensile one, the stress of the membrane is reduced by combining these thin films so that the membrane can avoid deformation. The BAW resonator, with thickness of ZnO / Al2O3 / SiO2=1.2 /0.45/1.25 microns, was designed by finite element method (FEM) simulation and fabricated. The value of quality factor (Q factor) and the TCF of the BAW resonator were realized over 1000 and −20 ppm/degree C, respectively. The Q of ZnO / Al2O3 / SiO2 structure was higher than that of ZnO / SiO2 one with keeping small TCF.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Makishima, Y., Hashimoto, K., Yamaguchi, M., Jpn J Appl Phys., 33, 2998 (1994).Google Scholar
2. Park, S-H., Seo, B-C., Park, H-D, Yoon, G., Jpn J Appl Phys., 39, 4115 (2000).Google Scholar
3. Yoshino, Y., Inoue, K., Takeuchi, M., Makino, T., Hata, T., Trans. IEE of Japan. 120–E, 547553 (2000) [1n Japanese].Google Scholar
4. Takeuchi, M., Yamada, H., Yoshino, Y., Makino, T., Arai, S., VACUUM, 66, 463 (2002).Google Scholar
5. Tapani, M., Antti, H., Juha, E., Martti, M., IEEE Trans. Ultrasonics Ferroelectrics and Frequency control, 48, 1241 (2001).Google Scholar
6. Takeuchi, M., Inoue, K., Yoshino, Y., K. Ohwada. VACUUM, 51, 565 (1998).Google Scholar
7. Shiozaki, T., Kitayama, M., Kawabata, A., Proc. of 12th EM symposium, 45(1983)[1n Japanese].Google Scholar
8. The 150th committee of Nihon gakujutsu shinkoukai danseiha soshi gijutu. Danseiha soshi gijutsu handobukku (Handbook of acoustic wave devise technology ) Ohm-sya: Tokyo, p320 (1991) [in Japanese].Google Scholar