Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-24T23:09:18.122Z Has data issue: false hasContentIssue false
  • English
  • Français

Space-Charge-Limited Charge Injection From Ito/Ppv Into A Trap-Free Molecularly Doped Polymer

Published online by Cambridge University Press:  16 February 2011

H. Antoniadis ,
M. Abkowitz ,
B. R. Hsieh ,
S. A. Jenekhe  and
M. Stolka
H. Antoniadis
Affiliation:
NSF Center for Photoinduced Charge Transfer, University of Rochester, Rochester, NY 14627 Xerox Corporation, Webster Research Center, Webster, NY 14580 Department of Chemical Engineering, University of Rochester, Rochester, NY 14627
M. Abkowitz
Affiliation:
Xerox Corporation, Webster Research Center, Webster, NY 14580 Department of Chemical Engineering, University of Rochester, Rochester, NY 14627
B. R. Hsieh
Affiliation:
Xerox Corporation, Webster Research Center, Webster, NY 14580 Department of Chemical Engineering, University of Rochester, Rochester, NY 14627
S. A. Jenekhe
Affiliation:
NSF Center for Photoinduced Charge Transfer, University of Rochester, Rochester, NY 14627 Department of Chemical Engineering, University of Rochester, Rochester, NY 14627
M. Stolka
Affiliation:
NSF Center for Photoinduced Charge Transfer, University of Rochester, Rochester, NY 14627 Xerox Corporation, Webster Research Center, Webster, NY 14580
Get access

Abstract

We describe bilayer structures comprised of a poly (p-phenylene vinylene) (PPV) layer and a trap-free diaryldiamine (TPD) doped in polycarbonate (PC) layer, sandwiched between indium-tin-oxide (ITO) and aluminum (Al) contacts. Two critical phenomena in the operation of polymer based electroluminescent devices, interface injection and carrier range, are investigated. It is established that the ITO/PPV contact is capable of sustaining dark current under trap-free space-charge-limited (TFSCL) conditions into a hole transporting TPD:PC layer. TFSCL currents are not observed in devices without the PPV layer. Upon increasing the thickness of the PPV layer a deviation from the TFSCL regime is observed which is attributed to trapping of the injected holes within PPV. These observations suggest a novel method for estimating the trapping Mobility-lifetime product μτ for holes in PPV. By this means we estimate μτ ∼ 10−9 cm2/V.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 328: Symposium Q – Electrical, Optical, and Magnetic Properties of Organic Solid State Materials , 1993 , 377
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Burroughes, J. H., Bradley, D. D. C., Brown, A. R., Marks, R. N., Mackey, K., Friend, R. H., Burn, P. L., and Holmes, A.B., Nature 347, 539 (1990).CrossRefGoogle Scholar
2. Conwell, E. M., Stolka, M., and Miller, M. R. In Electroluminescent Materials. Devices, and Large-Screen Displays: (SPIE Proceedings, San Jose, CA, 1993).Google Scholar
3. Lampert, M. A. and Mark, P., Current Injection in Solids (Academic Press, New York, 1970).Google Scholar
4. Abkowitz, M. A., Facci, J. S., and Stolka, M., Appl. Phys. Lett. 63, 1892 (1993).Google Scholar
5. Hsieh, B. R., Polym. Bull. 25, 177 (1991).Google Scholar
6. Stolka, M., Yanus, J. F., and Pai, D. M., J. Phys. Chem. 88, 4707 (1984).CrossRefGoogle Scholar
7. Spear, W. E., J. Non-Cryst. Solids 1, 197 (1969).Google Scholar
8. Abkowitz, M. A. and Pai, D. M., Phil. Mag. B 53, 193 (1986).Google Scholar
9. Silver, M., Onn, D. G., and Smejtek, P., J. Appl. Phys. 40, 2222 (1969).Google Scholar
10. Antoniadis, H. and Schiff, E. A., Phys. Rev. B 44, 3627 (1991).CrossRefGoogle Scholar
11. Hörhold, H.-H. and Helbig, M., Makromol. Chem., Macromol. Symp. 12, 229 (1987).CrossRefGoogle Scholar
12. Antoniadis, H., Hsieh, B. R., Abkowitz, M. A., and Stolka, M., Appl. Phys. Lett. 62, 3167 (1993).Google Scholar