Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-24T16:52:15.004Z Has data issue: false hasContentIssue false
  • English
  • Français

Solid Lubrication with Carbon Onions at High Temperature in Vacuum

Published online by Cambridge University Press:  01 February 2011

Atsushi Hirata  and
Shinji Saito
Atsushi Hirata
Affiliation:
[email protected], Tokyo Institute of Technology, Department of Mechanical Sciences and Engineering, 2-12-1 O-okayama, Meguro-ku, Tokyo, 152-8550, Japan, +81-3-5734-2163, +81-3-5734-2893
Shinji Saito
Affiliation:
[email protected], Tokyo Institute of Technology, Tokyo, 152-8550, Japan
Get access

Abstract

Solid lubricant properties of carbon onions prepared from diamond nanoparticles through a heat treatment at 1700°C have been examined at high temperatures up to 300°C in air and vacuum. Sliding friction between a silicon disk on which carbon onions were dispersed and a stainless steel ball was measured by means of ball-on-disk type friction testing. Friction coefficients in vacuum decreased with temperatures and became stable above 100°C for longer service lives. On the contrary to this, friction coefficients in air increased with temperatures despite Raman spectroscopic analysis showed that the structure of carbon onions were stable in dry air up to 300°C.

Keywords

lubricanttribologyC
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1085: Symposium T – Nanoscale Tribology–Impact for Materials and Devices , 2008 , 1085-T05-07
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Ugarte, D., Nature 359, 707 (1992).Google Scholar
2. Hirata, A., Igarashi, M. and Kaito, T. in Proceedings of the Sixth Applied Diamond Conference/Second Frontier Carbon Technology Joint Conference, edited by Tzeng, Y., Miyoshi, K., Yoshikawa, M., Koga, Y., Kobashi, K. and Amaratunga, G.A.J., (NASA/CP–2001-210948, 2001) pp.538–543.Google Scholar
3. Hirata, A., Igarashi, M. and Kaito, T., Tribology International 37, 899 (2004).Google Scholar
4. Street, K.W., Marchetti, M., Wal, R.L. Vander and Tomasek, A.J., Tribology Letters 16, 143 (2004)Google Scholar
5. Joly-Pottuz, L., Matsumoto, N., Kinoshita, H., Vacher, B., Belin, M., Montagnac, G., Martin, J.M. and Ohmae, N., Tribology International 41, 69 (2008)Google Scholar
6. Matsumoto, N., Joly-Pottuz, L., Kinoshita, H. and Ohmae, N., Diamond and Related Materials 16, 1227 (2007)Google Scholar