No CrossRef data available.
Published online by Cambridge University Press: 17 March 2011
The transfer matrix method (TMM) software (Translight, A. Reynolds [1]) was used to evaluate the photonic band gap (PBG) properties of the periodic arrangement of high permittivity ferroelectric composite (40 wt% Ba0.45Sr0.55TiO3 /60 wt% MgO composite, εR= 80, tanδ = 0.0041 at 10 GHz) in air (or Styrofoam, εR~ 1) matrix compared to a lower permittivity material (Al2O3, εR= 11.54, tanδ = 0.00003 at 10 GHz) in air. The periodic structures investigated included a one-dimensional (1D) stack and a three-dimensional (3D) face centered cubic (FCC) opal structure. The transmission spectrum was calculated for the normalized frequency for all incident angles for each structure. The results show that the bandgaps frequency increased and the bandgap width increased with increased permittivity. The effects of orientation of defects in the opal crystal were investigated. It was found by introducing defects propagation bands were introduced. It was concluded that a full PBG is possible with the high permittivity material.