Hostname: page-component-586b7cd67f-t7fkt Total loading time: 0 Render date: 2024-11-24T12:52:29.204Z Has data issue: false hasContentIssue false
  • English
  • Français

Shape-Memory Properties of Electrospun Non-wovens Prepared from Amorphous Polyetherurethanes Under Stress-free and Constant Strain Conditions

Published online by Cambridge University Press:  13 February 2012

Tilman Sauter ,
Karl Kratz  and
Andreas Lendlein
Tilman Sauter
Affiliation:
Center for Biomaterial Development and Berlin Brandenburg Center for Regenerative Therapies, Institute of Polymer Research, Helmholtz-Zentrum Geesthacht, Kantstr. 55, 14513 Teltow, Germany Institute of Biochemistry and Biology, University of Potsdam, 14476 Potsdam-Golm, Germany
Karl Kratz
Affiliation:
Center for Biomaterial Development and Berlin Brandenburg Center for Regenerative Therapies, Institute of Polymer Research, Helmholtz-Zentrum Geesthacht, Kantstr. 55, 14513 Teltow, Germany
Andreas Lendlein
Affiliation:
Center for Biomaterial Development and Berlin Brandenburg Center for Regenerative Therapies, Institute of Polymer Research, Helmholtz-Zentrum Geesthacht, Kantstr. 55, 14513 Teltow, Germany Institute of Biochemistry and Biology, University of Potsdam, 14476 Potsdam-Golm, Germany
Get access

Abstract

The shape-memory properties of electrospun polyetherurethanes (PEU) non-wovens with a single fiber diameter of around 1 μm were explored. In uniaxial cyclic, thermomechanical tensile tests a dual-shape shape-memory creation procedure (SMCP) was applied and the shape recovery was examined under stress-free and constant strain conditions. The thermal properties of the electrospun PEU non-wovens were found to be similar to those obtained for bulk PEU samples, whereas the mechanical properties revealed differences with respect to the elongation at break (εb) at increased temperatures. Excellent dual-shape properties were achieved for the PEU non-wovens with a high shape fixity rate (Rf) and shape recovery rate (Rr). A significant higher recovery stress (σmax) was obtained under constant strain recovery conditions for the electrospun non-wovens compared to the bulk PEU samples, which might be attributed to the higher degree of orientation of the polymer chains in the microfibers. Therefore the influence of different (single) fiber diameters as well as the variation of the programming elongation εm and temperature Tprog on σmax is an interesting issue for future investigations.

Keywords

polymerfibermemory
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1403: Symposium V – Multifunctional Polymer-Based Materials , 2012 , mrsf11-1403-v13-07
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Greiner, A. and Wendorff, J.H., Angew. Chem. Int. Ed., 46, 5670 (2007).Google Scholar
2. Bognitzki, M., Czado, W., Frese, T., Schaper, A., Hellwig, M., Steinhart, M., Greiner, A., and Wendorff, J.H., Adv. Mater., 13, 70 (2001).Google Scholar
3. Kratz, K., Habermann, R., Becker, T., Richau, K., and Lendlein, A., Int. J. Artif. Organs, 34, 225 (2011).Google Scholar
4. Li, D. and Xia, Y.N., Adv. Mater., 16, 1151 (2004).Google Scholar
5. McClure, M.J., Sell, S.A., Simpson, D.G., Walpoth, B.H., and Bowlin, G.L., Acta Biomater., 6, 2422 (2010).Google Scholar
6. Behl, M., Zotzmann, J., and Lendlein, A., Shape-Memory Polymers, 226, 1 (2010).Google Scholar
7. Cui, J., Kratz, K., Heuchel, M., Hiebl, B., and Lendlein, A., Polym. Adv. Technol., 22, 180 (2011).Google Scholar
8. Cui, J., Kratz, K., and Lendlein, A., Mater. Res. Soc. Symp. Proc., 1190, 93 (2009).Google Scholar
9. Cui, J., Kratz, K., and Lendlein, A., Smart Mater. Struct., 19, 065019 (2010).Google Scholar
10. Schmidt, C., Neuking, K., and Eggeler, G., Mater. Res. Soc. Symp. Proc., 1190, 43 (2009).Google Scholar